2013 Dodge Grand Caravan Wheelchair/handicap Ramp Van Rear Entry Conversion on 2040-cars

Auto blog

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

2020 Colorado Winter Driver's Notes | Behind the Wheel S02 // E12

2020 Mercedes-AMG GLC 63 I’ve had bad luck with SUVs this winter. Especially performance ones. First, I got a 2019 Range Rover Sport SVR delivered on summers right as two feet of snow fell, rendering it undriveable. Then, coronavirus cancelled Easter Jeep Safari as well as my trip out to Moab in the 2020 Jeep Wrangler Rubicon Diesel. Thankfully, when this 469 horsepower luxury mall crawler was dropped off, the sun shone down and the snow (mostly) held off.  The first thing that I noticed was there were a few blank buttons throughout the cabin, something that you may see in an entry model vehicle, but IÂ’m not accustomed to seeing in an AMG. Not a great look for a vehicle with an $80,000 price tag. Thankfully that was where the disappointment ended. As soon as you press the start button, the engine fires up and the exhaust note is incredible. Hopping on the highway ramp near my house, I floored it, and the biturbo V8 had me pressed back into the driver's seat, and this wasnÂ’t even the S version that our staff drove last year. Inside and out, the GLC 63 was everything youÂ’d expect from Mercedes. The interior was immaculate, and while the infotainment wheel and touch pad may take some getting used to for someone who isnÂ’t familiar, by now I have it down so that I can use it without looking. And while the V8 left me smiling ear to ear, I was most impressed by the amount of useable interior space there is. I happened to be moving at the time of this review and while all of my large furniture was shoved into the back of a moving van, I was able to fit almost everything else in the back of the GLC. 2019 and 2020 Fiat 500X Trekking ItÂ’s hard to say goodbye to an AMG and then turn around and be excited when a Fiat 500X pulls in your driveway (I know, I know, automotive journalist problems). That being said, when the red Fiat pulled up, I found myself admiring it. I am very familiar with the 500X. Back in 2016 Autoblog had one for a year as our long term test vehicle. I drove that car everywhere, multiple trips up north in Michigan, and even tracked it at Gingerman Raceway for a few laps before the brakes started smoking.  The 2019 model I had in my driveway and the 2020 model I drove in the snow up in the mountains feel very similar to that car. The interior is stylish and surprisingly roomy. The greenhouse is airy.

NC dealer creates the convertible Challenger that Dodge won't build

Dodge still hasn't turned the Challenger into a convertible, and the odds of seeing a factory-built drop-top muscle car appear in showrooms are decreasing annually. Tired of waiting, a dealership in North Carolina teamed up with a Florida-based body shop to create a topless alternative to the Ford Mustang and the Chevrolet Camaro. It's the real thing, and it's for sale. Keffer Dodge, Chrysler, Ram and Jeep shipped three 2019 Challengers to a shop named Convertible Builders, according to Motor Authority. After losing their lid, they gained a cloth soft top that opens and closes at the push of a button. There's no word on what effect the conversion has on handling, or what Convertible Builders did to offset the loss of structural rigidity. The build didn't include mechanical modifications. Two of the convertibles are R/T Scat Pack models equipped with a 6.4-liter Hemi V8 engine that serves 485 horsepower and 475 pound-feet of torque. It's not a supercharged Hellcat V8, but it's potent enough to spin the rear wheels in third gear. The third, R/T-based model features a 375-horsepower, 5.7-liter V8. While our dream build would use a six-speed manual transmission, all three come with an eight-speed automatic that sends the engine's power to the rear wheels. Keffer's website lists the gray, white, and red cars at $64,000, $60,000, and $56,300, respectively. The regular R/T Scat Pack Widebody model starts at $46,245, and the eight-speed automatic adds another $1,595, so the convertible conversion adds about $16,000. It's your only option, unless you're brave enough to chop the top yourself, or patient enough to wait until the early 2020s. Dodge has already started developing the next-generation Challenger, so the current car is unlikely to spawn a convertible before it retires. Its replacement due out in 2021 or 2022 will allegedly ride on a wider, longer evolution of the Giorgio platform found under the Alfa Romeo Giulia, among other models, and unverified rumors claim it's being designed with a topless variant in mind from the get-go. It might resurrect the Barracuda nameplate originally assigned to Plymouth when it makes its debut. Auto News Dodge Convertible Performance