2012 Dodge American Value Pkg on 2040-cars

Auto blog

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

FCA recalls 15k Grand Cherokees, Durangos over brake issues

The Basics: Fiat Chrysler Automobiles is recalling 14,768 examples of the Jeep Grand Cherokee and Dodge Durango, both from the 2015 and 2016 model years, and built between December 9, 2015, and January 14, 2016. The Problem: The left front brake caliper on some vehicles may have been made from the wrong type of iron, and could be prone to crack. A cracked brake caliper may not function properly. Injuries/Deaths: None reported. The problem was discovered by the automaker during testing. The fix: Dealers will need to check the casting date of the component in question, and if necessary, replace the brake caliper. The schedule for carrying out the recall service has yet to be outlined. If you own one: Expect to hear from the manufacturer to arrange an appointment with your local dealer. Related Video: RECALL Subject : Front Left Brake Caliper May Break Report Receipt Date: MAR 23, 2016 NHTSA Campaign Number: 16V168000 Component(s): SERVICE BRAKES, HYDRAULIC Potential Number of Units Affected: 14,768 Manufacturer: Chrysler (FCA US LLC) SUMMARY: Chrysler (FCA US LLC) is recalling certain model year 2015-2016 Jeep Grand Cherokee and Dodge Durango vehicles manufactured December 9, 2015, to January 14, 2016. In the affected vehicles, the left front brake caliper may crack due to being made from an incorrect material. CONSEQUENCE: A cracked brake caliper may lengthen the distance needed to stop the vehicle and increase the risk of a crash. REMEDY: Chrysler will notify owners, and dealers will inspect the front left brake caliper and depending on its casting date, replace it, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S16. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

eGarage interviews a couple with 65 Vipers

Owning multiple vehicles can be a hassle worth enjoying if you're willing to spend the time and the money required to acquire and maintain them. But when it's hard to make ends meet while underused valuable hunks of metal, plastic and rubber sit happily taking up garage space, journeys into the depths of other people's well-developed automotive obsessions will either bring you and your cars closer together, or compel you to sell them off before you become one of those fanatics. A recent video by eGarage is one of those journeys, and it's not for the faint of heart: D'Ann and Wayne Rauh own 65 Dodge and SRT Vipers in a collection of automobiles that exceeds 100.
We're not sure if the couple has developed heat-resistant calves from stepping over Viper door sills made burning-hot by side-exhaust pipes, but we wouldn't be surprised if they did. We did learn that their obsession with the no-holds-barred sports car started in 2006 with a trip to a dealership to buy just one Viper, which goes to show how innocently car obsessions can start. But the Rauhs seem to be doing just fine - perhaps better - 64 more Vipers later.
Watch the video below for the full story and to see what eGarage claims is the world's largest Viper collection.