2014 Dodge Durango Sxt on 2040-cars

Auto blog

2015 Dodge Challenger looks fresh, still plenty retro [w/video]

It was the Ford Mustang that kicked off the retro-styled muscle car renaissance back in 2005, but it was the Dodge Challenger that served as the movement's poster child, with its unabashedly retro looks. Over the years, though, as the Mustang and the Chevrolet Camaro were freshened and upgraded, the look of the big Dodge has remained largely consistent since its 2008 debut. For 2015, the Challenger has received a big freshening, boasting strongly revised front and rear ends and (finally, finally, finally) a redesigned interior.
Let's talk about that new cabin first. It's basically been plucked directly from the redesigned Charger, and boasts the same seven-inch IP display. The center stack's miserable, last-gen display has been replaced by an expansive, 8.4-inch UConnect system. Material quality should see a solid boost with the new cabin, as well.
The exterior, meanwhile, sees a revised front fascia with LED halo lights, as well as new grille inserts. A functional shaker hood scoop is a must-have extra on the V8 models, while the back of the car is highlighted by a new set of LED taillights that don't use the "Racetrack" design of Dodge's other models.

Mopar teases four of 'nearly 20' SEMA Show concepts

Yesterday it was Chevrolet. Today, Mopar has dropped some SEMA knowledge, releasing a quartet of teaser images that give us some indication of what kind of cars, trucks, and crossovers Fiat, Chrysler, Dodge, Jeep, and Ram will be showing in Las Vegas. Like Chevy, Mopar's concepts utilize both production and concept accessories, although Fiat Chrysler has gone a bit more indepth on at least one of its concepts. Immediately, the most tantalizing teaser is the one shown above. Yes, that's the back of a Challenger, and aside from the bright orange accents on the gray body, you should take notice of the badge mounted on the spoiler – yes, that says "GT AWD." To be honest, such a vehicle wouldn't be a huge shock, as both the Challenger's LX platform-mates, the Dodge Charger and Chrysler 300, are offered with all-wheel-drive options. Still, adding such a vehicle to the production cycle would give Dodge a leg up on the rear-drive only Ford Mustang and Chevrolet Camaro. Aside from that concept, FCA has also released teasers of a Ram-based concept, a 300-based concept, and what we're guessing is a Fiat 500X. We can't wait to see what the actual Fiat concept has to do with kiteboarding. As for the 300 and Ram, there's not a lot of hints on what sort of styling details they'll contain. The Chrysler has additional LED accents and what we're guessing is matte blue paint, while the Ram is based on a Hemi-powered 1500 with Rebel styling cues. This is just a very tiny sample of Mopar's final SEMA roster, which include "hundreds" of parts. There should also be a total of 20 vehicles covering all four former Chrysler Group brands, as well as Fiat. Naturally, we'll have plenty to report on each vehicle once the SEMA show kicks off in the next couple weeks.

UAW papers reveal release dates for new Dodge, Jeep and Ram models

Documents published by the United Auto Workers union reveal key information about some of the products Dodge, Jeep and Ram will release during the early 2020s. All three brands will try to capitalize on the growing demand for trucks and SUVs in the United States. The agreement between the UAW and Fiat Chrysler Automobiles (FCA) outlines what the period between 2019 and 2023 will look like from an employee's vantage point. The $4.5 billion factory the automaker is building in Detroit will begin manufacturing a three-row Jeep model in 2020, and it will add the next-generation Grand Cherokee to its roster the following year, according to CarScoops. The new Grand Cherokee will also roll out of the Jefferson North facility that makes the current model scheduled to retire shortly before its successor arrives. The Dodge Durango will continue to be built there, and the UAW papers mention a mild-hybrid variant of the SUV due out before the end of 2020. Two body-on-frame Jeep models tentatively scheduled to revive the heritage-laced Wagoneer and Grand Wagoneer nameplates will break cover in 2021. They will be built alongside Ram pickups at the Warren Truck plant, and odds are the three models will share several components under the sheetmetal. Adding the two Jeep models is expected to create 1,400 jobs, FCA predicted. Speaking of Ram, the high-performance TRX model (pictured) aimed at the Ford F-150 Raptor's jugular is penciled in for a 2020 launch. The concept that previewed the model made its debut in 2016, so it's reasonable to assume it will have changed considerably by the time it reaches showrooms. It will be based on the newest variant of the 1500, not on the last-generation model still sold as the Classic. What won't change is the supercharged, 6.2-liter Hellcat V8 between its fenders. The plug-in hybrid Wrangler remains on track for a 2020 launch. The Cherokee will continue to come out of Belvedere Assembly in Illinois, but the UAW's documents mention "fresh models / features" off of its unibody platform. Whether that means new trim levels or additional body styles remains to be seen, but it sounds like something new and Cherokee-related is around the corner. The ancient Dodge Journey shares at least one thing with the beater you drove in high school: a four-speed automatic transmission. The gearbox is finally on its way out, according to the UAW, and the 2.4-liter four-cylinder engine that powers the entry-level model isn't long for this world, either.