2004 Dodge Durango Slt 7-passenger Side Steps 80k Miles Texas Direct Auto on 2040-cars

Auto blog

Inner Demon revealed: 840 hp and other jaw-dropping details

After months of teasers, rumors, cryptic messages, and veiled hints, the 2018 Dodge Challenger SRT Demon is finally here, and it's as wonderfully insane as we hoped it would be. Finally we know the facts and figures that Dodge has been hinting at for so long. 840 horsepower. 770 lb-ft of torque. 2.3 seconds to 60 mph. A quarter-mile run of 9.65 @ 140 mph. While pricing hasn't been announced, Dodge is trying to keep it under $100,000. That horsepower figure makes this the most powerful production V8 ever. With those 0-60 and quarter-mile times, it's also NHRA certified as the quickest production car ever. Someone with the means needs to line a Demon up against a Tesla Model S P100D. All that power and all of the Demon's trick launching software and hardware will throw a driver back against their seat with 1.8 Gs. Drivers will be seeing a bit of sky, as the Demon is the first production car to pull a wheelie from a dead stop. Yes, this is all totally and 100 percent street legal. View 48 Photos In order to make all this power, the red-painted supercharged 6.2-liter Hemi V8 has been significantly improved over the Hellcat. It's equipped with a larger 2.7-liter supercharger that turns the boost up to 14.5 psi, redlines at 6,500, and has what Dodge is calling SRT Power Chiller, a system that uses the air conditioning to cool the air coming in through the new Air Grabber hood scoop. In order to keep your engine running time and time again, there is an after-run cooler than cools the supercharger after the car is shut off. The pistons and connecting rods have been strengthened to deal with the higher load. In order to feed enough juice into the engine, the Demon uses dual fuel pumps. We assume that a decent EPA rating wasn't on the top of the engineer's list. Oh, and the Demon can run on 100-octane with the press of a button. With the traditional SRT black and red keys, the Demon actually has three horsepower ratings: 500 with the black key, 808 with the red key, and the full 840 with the red key and 100-octane fuel. Don't worry, even if you have the black key, the Demon will drop the 1/4 mile in 11.59 seconds, still quicker than almost anything around. Most of the rest you already know from the seemingly endless teasers. The Demon wears lightweight wheels with sticky 315/40R18 Nitto drag radials at all four corners.

2016 Dodge Challenger and Charger Hellcats see doubled production

The launch of the Hellcat supercharged V8 in the Dodge Challenger and Charger for the 2015 model year was a massive success. The one-two punch of muscle cars probably grabbed the brand more headlines than it had seen in ages by offering a world-beating 707 horsepower from the growling engine under the hood. The only real wrench in the works was keeping up with all of the orders. For 2016, Dodge might have fixed that little problem with plans to make more than twice as many of these mean machines Despite production seeing a massive boost, a few customers with orders for 2015 examples will need to wait just a little longer to experience those 707 ponies. The automaker will cancel any unscheduled, sold orders for the current model, but those buyers will receive a discount on the 2016. Similar to last year, dealers will earn their allocation of the muscle cars based on Dodge sales and how long the Hellcats stay on their lots. There are some very tiny changes for any buyers who are holding out for the 2016 Hellcats, too. Mechanically, they are identical to the 2015s with a 6.2-liter supercharged V8 and eight-speed automatic. The interiors see some improvements, though. Both the Challenger and Charger now receive standard Laguna Leather upholstery and an improved 8.4-inch Uconnect system with navigation, an HD radio, and five years of SiriusXM Travel Link and Traffic. Orders for both open in the second week of August, and production actually begins in September in Brampton, Ontario, Canada.

Chrysler recalling 280k Dodge Ram 1500 pickups over axle seizures

Following a June investigation by the National Highway Traffic Safety Administration, Fiat Chrysler Automobiles will be recalling 280,000 Dodge Ram pickups from model year 2005. The issue, NHTSA told The Detroit News, centered on a loose pinion nut, which could cause the rear axle to seize and, potentially, the driveshaft to detach. The affected vehicles were built between January of 2004 and August of 2005, while of the 280,000 trucks, only 257,000 were sold in the US market. According to The News, the recall will begin on February 13, and will see owners report to dealerships to have "a retention feature" added to the pinion nut.