2002 Dodge Durango Slt 4x4 Low Miles New Car Trade on 2040-cars

Auto blog

2021 Dodge Challenger Drag Pak costs over $140,000

Although the 2021 Dodge Challenger Super Stock is the most powerful and most expensive Challenger you can buy for the street, Dodge has an even more beastly, and more expensive, version that's only for track and racing use. It's the 2021 Dodge Challenger Drag Pak, shown last year, and it rings in at $143,485, not including destination fee or taxes. That money could buy you a Super Stock and a basic Hellcat, and both of those could be driven to the local cruise-in. But the Drag Pak features a special supercharged 5.8-liter engine built for racing. While Dodge hasn't given exact power numbers, we know the last Drag Pak from 2015 made a whopping 1,200 horsepower. The new Drag Pak of course also gets other drag racing equipment such as a manually-shiftable three-speed automatic, solid rear axle, roll cage, drag tires, a wheelie bar and a parachute. This all means that a Drag Pak will thoroughly stomp any road-legal Challenger at the drag strip. The Drag Pak has exclusivity on its side, too. Dodge is only going to build 50. If you want a shot at one, you or your dealer will have to call into Dodge/SRT Concierge to register for the chance to order one. The phone number is 800-998-1110, and they're taking phone calls as of today. Order books open on September 9. Related Video:

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Chrysler recalling nearly half a million Durangos and Grand Cherokees

Rule number one of public relations – save the bad news for Friday. Fiat Chrysler has adhered to that, announcing today that it'd be voluntarily recalling 467,480 SUVs. This latest recall could actually be thought of as a continuation of a September 2014 recall, relating to the fuel-cell relay. In that case, some 188,723 Dodge Durango and Jeep Grand Cherokee CUVs from model year 2011 were recalled. And this time, it's the Durango and GC in trouble again. FCA is adding crossovers from model years 2012 and 2013 to the fuel-pump recall, although only diesel-powered Jeeps with the 3.0-liter V6 that were sold outside of North America are affected this time around. As with the previous recall, deformities in the fuel-pump relay, which could affect its functioning. In most cases, FCA reports that the affected vehicles simply won't start, although they also could be prone to stalling. A new relay circuit will be installed that promises increase durability. Of the 467,480 vehicles being recalled, 338,216 were sold in the US market, 18,991 went to Canada and 10,829 were shipped south of the border, to Mexico. Outside of the NAFTA region, FCA is recalling 99,444 vehicles. No injuries or accidents have been associated with this recall. Statement: Fuel-Pump Relay February 27, 2015 , Auburn Hills, Mich. - FCA US LLC is voluntarily recalling an estimated 467,480 SUVs worldwide to install new a relay circuit that improves fuel-pump relay durability. FCA US engineers have determined a condition identified in a previous investigation may extend to additional vehicles. The previous investigation, which led to a recall, traced a pattern of repairs to fuel-pump relays that are susceptible to deformation. This may affect fuel-pump function, preventing a vehicle from starting, or leading to engine stall. Of the two scenarios, the no-start condition is the more common. FCA US is unaware of any related injuries or accidents. The fuel-pump relay is located inside the Totally Integrated Power Module (TIPM), which also helps manage other vehicle functions. None of these other functions, including air-bag deployment, is affected by the fuel-pump relay. The new campaign affects an estimated 338,216 vehicles in the U.S.; 18,991 in Canada; 10,829 in Mexico and 99,444 outside the NAFTA region. Covered are model-year 2012 and 2013 Dodge Durango full-size SUVs and non-NAFTA 2011 Jeep Grand Cherokee mid-size SUVs equipped with 3.0-liter diesel engines.