2001 Dodge Durango 4x4 on 2040-cars

Auto blog

Fiat Chrysler recalls 320,000 Dodge Darts that could roll away

WASHINGTON — Fiat Chrysler Automobiles NV said Friday it is recalling more than 320,000 Dodge Dart compact cars in North America that could roll away because of a defective part that could allow the shift cable to detach from the transmission. The Italian-American automaker said the recall covers 2013 through 2016 model year automatic transmission Dart cars and that the defect could prevent drivers from shifting vehicles into park. The company said it is not aware of any crashes or injuries related to the issue but has several thousand reports of related repairs to vehicles. The company said a cable bushing may degrade after prolonged exposure to high ambient heat and humidity. The company said owners should make sure they shut off the vehicle and engage the parking brake. Fiat Chrysler will replace the transmission side shifter cable bushing, the company said. The company did not said when repairs will be ready. The recall covers about 298,000 U.S. vehicles, 20,117 in Canada, 3,400 in Mexico and about 900 outside of North America. Fiat Chrysler ended production of the Dart in 2016. FCA has had a number of recalls over shifter problems in recent years. Some 1.5 million Ram trucks were recalled in 2017 for a shifter problem, and another 228,000 were recalled in 2018. And 1.1 million Chrysler, Dodge and Jeep models were recalled in 2016 over what the National Highway Traffic Safety Administration called an "unintuitive" shifter design that caused drivers to exit their vehicles thinking they were in Park when in reality they were still in Drive or Reverse. The shifter in Dodge Chargers, Chrysler 300s and Jeep Grand Cherokees was implicated in more than 120 accidents, more than 40 injuries, and in the death of "Star Trek" actor Anton Yelchin.

Stellantis reveals STLA Large platform with EV and ICE support

Hot on the heels of a Jeep Wagoneer S teaser and photos of the prototype next-generation Dodge Charger (or Challenger), comes a reveal and details of what will likely underpin both of them: the STLA Large platform. It's one of multiple Stellantis flexible architectures that will be the basis of its upcoming electric cars, and apparently internal combustion ones, too. Stellantis says the STLA Large platform will be for D- and E-segment cars, crossovers and SUVs. In other words, it will be for midsize and large vehicles. For reference, lengths supported will be from 187.6 to 201.8 inches, and width will range from 74.7 to 79.9 inches. It will be highly flexible, too, with Stellantis claiming significant amounts of adjustability in overhangs, wheelbase, suspension placement and powertrain arrangement. The powertrain flexibility is quite impressive. Front-, rear- and all-wheel-drive layouts will be supported. Single- and dual-motor layouts will be on offer. Internal combustion will be available, too, either on its own or as a hybrid. Apparently engines can be fitted either longitudinally or transversely, too. Battery packs with between 85 and 118 kWh of capacity will be offered, with Stellantis claiming that sedan-style vehicles could have a range of up to 500 miles. The packs will also be available in 400- and 800-volt designs. Stellantis noted also that the platform can "easily accept future energy storage technologies when they reach production readiness." This seems to hint that the company is looking at different battery chemistries and maybe even solid-state batteries that could be added more easily in the future. Furthermore, the platform is designed to handle impressive output. Stellantis says that some models on the platform will have 0-to-62 mph times in the 2-second range. Limited-slip differentials for improved power delivery and wheel-end disconnects for reduced mechanical drag are also on the table for this platform. All of these details fit well with the information previously given for the concept Dodge Charger Daytona Banshee and Jeep Wagoneer S. The former was previewed with both battery voltage architectures and a wide range of electric powertrains with between 456 and 670 horsepower depending on specification and upgrades. And that's just for the 400-volt system; the 800-volt option wasn't detailed. We've also seen photos of the Charger chassis seemingly with provisions for gas engines, likely versions of the Hurricane I6.

No wing, no Hemi. This Dodge Charger Daytona is two-tone and tufted

In between the Dodge Charger Daytona's 1969 debut as a wild, winged NASCAR warrior and the current 2020 Charger SRT Hellcat Widebody Daytona 50th Anniversary Edition with its monster 717-hp Hemi V8, the nameplate had some ... less-glorious years. The nameplate first resurfaced in 1975, when the Charger moved into the "personal luxury" space as a riff on the Chrysler Cordoba. This 1975 Charger Daytona might not be the model's heyday, but damn if this clean machine, surfaced by Barnfinds.com, isn't striking in its own Me Decade kind of way. And this low-miles example is on offer right now on eBay motors. Outside, this dynamic Dodge sports two-tone silver and blue paint, alloy wheels with white-letter tires, and a power sunroof. Inside, we find high-backed split-bench seats with button-tufted vinyl (no "rich Corinthian leather" here). Raising the miles-long hood reveals a 400-cubic-inch, 4-bbl V8, which for 1975 packed 190 horsepower. A far cry from today's 717 horses, perhaps, but still an upgrade over the Charger's standard 360-cubic-inch V8. It may not be the car that pops immediately to mind when someone says, "Charger Daytona," but with less than 12,000 miles showing, this mid-Seventies example is a time warp to a lesser-known era for the marque.   Featured Gallery 1975 Dodge Charger Daytona Dodge Coupe Classics