on 2040-cars

Auto blog

The 2018 Dodge Demon sounds like nothing else on the road

The Dodge Demon seems to have a torque problem, if making too much to easily contain can be considered a problem. In order to keep all that twist under control, the Demon has a new torque reserve launch system that works all sorts of engineering black magic to build boost without overloading the rear tires and brakes. That system, combined with the sticky Nittos and the fancy new suspension, should lead to some pretty spectacular 60-foot and 1/4-mile times. The way the system works is relatively straightforward. A bypass valve on the supercharger closes, "prefilling" the blower. In order to balance revs and torque, the computer can adjust fuel flow and spark on individual cylinders. The torque reserve kicks in when Launch Mode is initiated and the engine is turning at least 1,000 rpm. The goal is to reach peak boost quicker while efficiently putting down power. The side effect is a distinct exhaust note, which Dodge admits may make it seem like the Demon is broken. That seems to be the root of the "If you know, you know" tagline that the automaker has been using since the first teaser. Those interested can even download a ringtone, which might make it seem like you have a blown-out speaker on your phone. You can get a brief taste in the latest teaser video. In addition to the new info on the Launch Mode, Dodge released a couple of new teaser images. We briefly glimpsed one of these last week. It's a shot of the Demon's performance pages. The number 757 has appeared before, and all the talk of torque leads us to conclude that this is the Demon's torque output. The number 815 was seen in a separate teaser (shown below), which we feel may be the horsepower rating. If those numbers are correct, that would mean an increase of 108 horsepower and 107 lb-ft of torque, totally reasonable numbers given all the Demon's modifications. The license plate photo is another equation or code. This one, 3.9+221=405, is just as cryptic as the others. Look for more news and hints at ifyouknowyouknow.com in the weeks leading to the Demon's reveal. Related Video: Related Gallery Dodge Demon Teasers View 17 Photos Dodge Coupe Performance supercharger dodge demon dodge hellcat

Barracuda's Dodge branding no biggie, but what about engines?

Rumors about a revival of the Barracuda nameplate have been circulating for years now, though which brand it might fall under has been a bit of a mystery. Initial speculation had the car labeled an SRT product, but that acronym has since returned to its former role as a sub-brand for top-performance Mopars. Thanks to leaks from a recent FCA dealership event, we know the Barracuda is back on the table but will be sold under the Dodge umbrella, a move that has been generating a bit of ire from Pentastar fanatics, as the car was originally part of the defunct Plymouth brand. Given what's known about the new model, however, the badge is the least of my concerns about the new car. Let's start with the re-branding itself. This isn't the first time Chrysler has shuffled models around to different brands. The current-generation Viper spent two years as the flagship model under the SRT banner, only to return to Dodge for 2015 when SRT resumed its former role as a sub-brand. Years ago, the Neon was sold as a Plymouth, a Dodge, and a Chrysler model, depending on where you shopped for one. When Plymouth ceased to exist, the last few years of Prowler production got Chrysler badges instead. Then there's the new Jeep Renegade, a model whose name was born out of a trim level. The Barracuda might not turn out to be a muscle car in the way we currently define them. Further examples of naming liberties taken throughout automotive history could fill a book, but suffice it to say that these days a model's name has very little to do with the vehicle itself or any legacy it might have. The Barracuda name might be a particularly sacred cow with enthusiasts, but to me, a much bigger concern is the fact that the car might not turn out to be a muscle car in the way we currently define them. News from the Fiat Chrysler dealer briefing earlier this week indicates that when the next Charger debuts it will share its platform with the Barracuda, much the way the Charger and Challenger are twinned now. One difference is that the Barracuda is tipped to be offered as a convertible, while the modern Challenger is tintop-only. The Charger and Barracuda will use the rear-drive platform developed for Alfa Romeo's new Giulia, itself designed as a BMW M3 fighter both from a dimensional and dynamic standpoint; the Barracuda is expected to be slightly smaller than the current Challenger.

The Dodge Challenger 1320 is rarer than the vaunted Demon

Dodge stopped making the 840-horsepower Challenger Demon after the 2018 model year, and it filled the gap the coupe left in its range with a slightly tamer variant called 1320. While it wasn't a limited-edition model, production figures released recently cement its status as a future classic. 1320 references the length of a drag strip, which normally checks in at 1,320 feet, and the name speaks volumes: It was built to go flat-out for a quarter mile. It offered all of the go-fast goodies found in the Demon, including a transbrake, a line lock, an SRT-tuned suspension, plus bigger brakes provided by Brembo, and it swapped the supercharged V8 for a naturally-aspirated, 6.4-liter eight shared with the Challenger 392 and tuned to 485 horsepower. It wasn't quite as quick as the Demon, but it remained a race car barely street-legal enough to put plates on, so it occupied a shallow niche. Dodge made 1,054 examples of the 1320 during the 2019 model year, according to Mopar Insiders. Of those, 1,026 units were sold in the United States, and the remaining 28 stayed in their home country of Canada. As for colors, 232 enthusiasts chose Pitch Black, making it the most popular. At the other end of the spectrum, 13 buyers ordered Maximum Steel, which is the rarest color offered to the public. One 1320 was painted in Yellow Jacket, and another in Billet, but they were pre-production cars. To add context, the firm capped Demon production at 3,300 units, including 300 for the Canadian market. The 1320 is returning for the 2020 model year, so it might ultimately become more common than the Demon, but it remains a rare edition that will turn heads at high-profile classic car auctions in a few decades' time. If you've got one, race it, but pamper it off the track, and hang on to it. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.