1975 Dodge Hang Ten Dart, Rust Free Original California Car, Factory Sunroof on 2040-cars

Auto blog

Dodge designer on yellow plastic splitter guards: 'I wish they would take them off'

About a year ago, Dodge began placing yellow strips of plastic on the leading edge of Charger and Challenger front splitters to prevent damage during transport from plant to dealer. Dodge embossed "To Be Removed By Dealer" into the plastic, but those instructions weren't always followed. By summer of 2018, so many owners had left the tabs on, or reinstalled a discarded set, or bought a set on eBay for $100 or more, that factions broke out. Some thought the protectors looked cool, some thought they looked foolish, some thought it didn't matter either way. Now Dodge and SRT lead designer Mark Trostle has stepped in with his thoughts, those being, "I wish they would take them off."  Trostle made the remarks at the end of a video by Canadian auto scribe Brian Makse that otherwise dove into the design and technology on the 2010 Charger Widebody. Part of the designer's remarks related to aesthetic aspects — designers are paid to be precious about every line they draw, after all. "When we did the sketch for the Charger and Challenger," he said, "it never had yellow strips on it," and, "To me, as a designer, it ruins the lines of the car." He had a functional reason as well, though: "You're just ruining the paint!" The paint issue convinced Tyler Grant, the Internet sales manager at a Dodge dealer, to make a Facebook post in April this year requesting owners remove the splitter guards. Grant wrote that because the guards aren't specifically molded to fit perfectly, dirt and moisture get between the plastic and the splitter and mar the clear coat or paint, illustrated by a scuffed example that had been driven just 18 miles with the protectors on. He ended with, "Please, on behalf of your splitter AND its paint, take off the splitter guards." Despite forum chatter, splitter-shaming Facebook photos, and Facebook groups like "Hey Pal, You Forgot to Take Your Splitter Guards Off," it appears too late for the protector color to curb (get it?) the trend. Owners have already dealt with the dirt issue by putting protective tape on the air dam, others have painted the spilitter guards to match the car, and the owner of a vintage Dodge pickup ran yellow tape across the width of his front bumper in an attempt to join the party.  In the Makse video, Trostle said that the automaker would soon be rolling out a "new fashionable purple color" for the protectors. "We'll see if that one takes off," he said. "I hope it doesn't."

The Dodge Neon is alive!

"Holy crap! It's a new Dodge Neon! Like a new new one." Oddly, no one else on the Cancun resort shuttle seemed to notice. Or care. Ogling Mexican-market compact sedans is apparently something exclusive to automotive journalists on vacation. Yet there it was, fittingly on Dio de los Muertos, in all its resurrected glory. With a margarita in hand and an ocean in front of me, ignored, I turned my attention to my phone to get to the bottom of Neon version 3.0. Introduced for 2016, today's Dodge Neon is based upon and built alongside the Fiat Tipo/Egea, a C segment compact sedan co-developed by Fiat and Turkish industrial outfit Koc Holding. More than 125,000 were sold last year in Europe, with another 47,000 in Turkey. It's also sold in the Middle East and Africa, with Mexico alone getting the Neon version. Exterior styling is really the only difference, and then, only the crosshair grille manages to identify it as a Dodge. Then again, the same could be said for the not-so-dearly departed Dart, which belonged to the same segment. It was much bigger, though, with an extra 6 inches of overall length and 3 inches of wheelbase (which, as I just discovered, is "distancia entre ejes" en espanol). The Neon interior, not surprisingly, is pretty much the same as its Fiat siblings. The dash has two variations. A bigger, upgrade touchscreen resides in a dash-mounted, tablet-style infotainment pod, but the standard stereo head unit or 5-inch touchscreen upgrade fits into a binnacle shared with the instrument panel. It's a bit more like the Challenger, Charger, and yes, Dart in this regard, but in total, the Neon's cabin design is also less blocky and more organic in appearance. The switchgear is pure Fiat, but the steering wheel has the same control layout as Dodges, Jeeps and Chryslers. Power comes from the Challenger Scat Pack's 6.4-liter Hemi V8. No, it doesn't, I totally got you. The standard engine, dubbed FIRE, is a 1.4-liter naturally aspirated four-cylinder good for 95 horsepower and 94 pound-feet of torque. So, less than the Scat Pack. The optional engine, dubbed E.TorQ, which is in no way related to the Ram's eTorque mild hybrid system and not especially eTorquey, is a 1.6-liter naturally aspirated four-cylinder good for 110 hp and 112 lb-ft. Sadly, the Neon color selection is in no way neon, which probably doesn't matter since virtually every car on the Yucatan peninsula is painted white.

The Dodge Demon isn't the only way to a 10-second quarter mile

The Demon's rear tires smoke, the front tires lift – and in under ten seconds (after having spent $85,000) you've covered a quarter mile. In short, we fully get the attention shown Dodge's SRT Demonstrator. With disruption the operative word of the times, it's good to see a representative of the movement coming from Detroit. The SRT Demon delivers disruption in spades. There is, however, a viable alternative – and it doesn't require getting on the list at your Dodge dealer. If you want to do 0-60 in under three seconds or the quarter mile in around 10, the folks at Honda, Kawasaki, Suzuki and Yamaha – with any of their one-liter superbikes – have you covered. The gestation of what we now know as the superbike came roughly a decade after the debut of the muscle car. It was in the early '70s, as emission and safety regulations – along with rising insurance premiums – decimated the ranks of Detroit's fastest that motorcycle makers found their magical, almost mystical momentum. Honda's CB750 four was arguably the first, followed soon by Kawasaki's Mach III and Z-1. After that, it was Katie-bar-the-door, with more horsepower offered by Japanese OEMs until, invariably, insurance premiums went higher and, during the last recession, 20-somethings couldn't get affordable loans or insurance. Today, Japan's Big Four are once again engaged in a horsepower war, fueled by the rising interest in MotoGP, along with the rising profits available when selling a $20,000 motorcycle. And if that $20,000 - $10K per wheel – seems high, simple math tells you it's less than half of what you'll spend per corner if buying Dodge's Demon. The specs tell the tale. The Demon, fattened by both its flared fenders and a platform dating from the George Bush administration, supports its 4,200+ pounds on a wheelbase of 116 inches. That's in contrast to Suzuki's GSX-R1000 – redesigned for 2017 – which puts its 443 pounds atop a wheelbase of just 56 inches. To maximize its Hemi-supplied 800+ horsepower, Dodge diverts the air conditioning from the Demon's interior to the engine, which makes racing on a summer evening (you guessed it) devilishly hot. On Suzuki's GSX-R1000 – or similarly-equipped superbikes – almost all of the air at 100+ miles per hour is directed at you. To further underscore the differences, know that the GSX-R1000 and its like-minded competition can turn a quick corner, while the Demon is hard-pressed to execute a U-turn at the end of a quarter-mile straightaway.