1965 Dodge Dart Gt 3.7l on 2040-cars

Auto blog

7 major automakers to build open EV charging network

A new joint venture established by BMW, GM, Honda, Hyundai, Kia, Mercedes-Benz and Stellantis will build a new North American electric vehicle charging network on a scale designed to compete with Tesla's industry-benchmark Supercharger network. The 30,000-plus planned new chargers will accommodate both Tesla's almost-standard North American Charging System (NACS) and existing automakers' Combined Charging System (CCS) options, effectively guaranteeing compatibility with the vast majority of current and upcoming electric models — whether they're from one of the involved automakers or not.  "With the generational investments in public charging being implemented on the Federal and State level, the joint venture will leverage public and private funds to accelerate the installation of high-powered charging for customers. The new charging stations will be accessible to all battery-powered electric vehicles from any automaker using Combined Charging System (CCS) or North American Charging Standard (NACS) and are expected to meet or exceed the spirit and requirements of the U.S. National Electric Vehicle Infrastructure (NEVI) program." Critically, the automakers involved will have a say in how the charging tech is implemented, guaranteeing that the hardware will play nicely with each automaker's in-house charging systems. Hyundai and Kia, for example, were hesitant to jump on board the Tesla NACS bandwagon earlier this year over concerns that the Supercharger network is insufficient for powering the two automakers' 800-volt charging systems; similar tech is used by Volkswagen and Porsche.  In addition to providing much-needed capacity and high-output charging for America's growing fleet of electric cars and trucks, the new network will integrate seamlessly with each automaker's in-app and in-vehicle features, rather than forcing customers to use third-party tools and payment systems, as is the case with some existing public charging infrastructure.  "The functions and services of the network will allow for seamless integration with participating automakersÂ’ in-vehicle and in-app experiences, including reservations, intelligent route planning and navigation, payment applications, transparent energy management and more. In addition, the network will leverage Plug & Charge technology to further enhance the customer experience," the announcement said.

NC dealer creates the convertible Challenger that Dodge won't build

Dodge still hasn't turned the Challenger into a convertible, and the odds of seeing a factory-built drop-top muscle car appear in showrooms are decreasing annually. Tired of waiting, a dealership in North Carolina teamed up with a Florida-based body shop to create a topless alternative to the Ford Mustang and the Chevrolet Camaro. It's the real thing, and it's for sale. Keffer Dodge, Chrysler, Ram and Jeep shipped three 2019 Challengers to a shop named Convertible Builders, according to Motor Authority. After losing their lid, they gained a cloth soft top that opens and closes at the push of a button. There's no word on what effect the conversion has on handling, or what Convertible Builders did to offset the loss of structural rigidity. The build didn't include mechanical modifications. Two of the convertibles are R/T Scat Pack models equipped with a 6.4-liter Hemi V8 engine that serves 485 horsepower and 475 pound-feet of torque. It's not a supercharged Hellcat V8, but it's potent enough to spin the rear wheels in third gear. The third, R/T-based model features a 375-horsepower, 5.7-liter V8. While our dream build would use a six-speed manual transmission, all three come with an eight-speed automatic that sends the engine's power to the rear wheels. Keffer's website lists the gray, white, and red cars at $64,000, $60,000, and $56,300, respectively. The regular R/T Scat Pack Widebody model starts at $46,245, and the eight-speed automatic adds another $1,595, so the convertible conversion adds about $16,000. It's your only option, unless you're brave enough to chop the top yourself, or patient enough to wait until the early 2020s. Dodge has already started developing the next-generation Challenger, so the current car is unlikely to spawn a convertible before it retires. Its replacement due out in 2021 or 2022 will allegedly ride on a wider, longer evolution of the Giorgio platform found under the Alfa Romeo Giulia, among other models, and unverified rumors claim it's being designed with a topless variant in mind from the get-go. It might resurrect the Barracuda nameplate originally assigned to Plymouth when it makes its debut. Auto News Dodge Convertible Performance

Dodge Charger Widebody is rumored on its way for 2020

Grab all the salt you have, save the amount you need for your recommended daily allowance. Mopar Insider reports its sources as having confirmed Dodge will unveil a Charger Widebody for the 2020 model year, in SRT Hellcat and R/T Scat Pack trims. Such a move would copy the trim and aesthetic formula used — to excellent affect — on the Dodge Challenger. The Charger widebodies would get also get unique suspension tuning, and the same 305/35 ZR 20 Pirellis as on the Challenger widebodies, but wrapped around unique, dual-five-spoke designs that are 11 inches wide. There has been talk of a widebody Charger for at least two years, many of those conversations carried out in the same way sleuths parse grainy photos of monsters. In April 2017, Instagram user gtpprix caught a standard Dodge Charger wearing Challenger widebody wheels, spaced so that the rubber extended beyond the fenders. A month later, a YouTube account in the name of Sinister Life caught the same car on video. The license plate doesn't appear to be from Michigan, which is where almost all Dodge prototypes get licensed. On the other hand, early spy shots of Challenger widebody prototypes from 2016 featured this same setup — a normal version with protruding tires. The SRT CEO at the time, Tim Kuniskis, joked about testing the Challenger widebody openly, knowing everyone would think it was a prototype Demon. According to Mopar Insider, engines and outputs won't change on the Charger widebody versions. That means sticking with the 485-horsepower, 6.4-liter V8 in the R/T Scat Pack, and the 717-hp, 6.2-liter V8 in the Charger Hellcat. Looks would change, however, with new front and rear fascias to differentiate the model and cohere with the new lines. That includes a new dual-snorkel hood grille and repositioned intakes, plus tweaked side sills. If it's really on the way, we should know this summer. Such a model would also support recent comments from Steve Beahm, head of Dodge, Fiat, and Chrysler brands, when Automobile asked about how the company will maintain any momentum in difficult days for sedans. Beahm said, "[Our] our job was to [ask,] 'How do we differentiate within the brands that are going to remain passenger-car brands?' ... What we do is we try to make our vehicles look different." Related Video: