1968 Dodge Coronet R/t on 2040-cars

Auto blog

2015 Dodge Challenger SRT Hellcat [w/videos]

Darrell Waltrip once said, "If the lion didn't bite the tamer every once in a while, it wouldn't be exciting." The sentiment behind that aphorism is causing my adrenal gland to wake up as Dodge and SRT drivers and engineers - somber-faced to a man - give me the track talk that will precede my driving the 2015 Dodge Challenger SRT on the circuit at Portland International Raceway. PIR might not be Daytona, and the 707-horsepower Challenger Hellcat might seem tame to a legend like ol' Jaws, but there's a not-small part of me that's thinking about how hard Dodge's fire-breathing kitty might bite.
Just a few hours previous, I'd gotten behind the wheel of the Hellcat for the first time, letting its hyperbole-spitting, supercharged V8 Hemi pull me yieldingly through Portland's morning commuter traffic. Lulled into a cocky certainty by the Challenger's good manners at low speed, I drove the throttle just a hair too deep, too fast when I ran on to the highway ramp. For just an instant the rear tires were utterly drenched in torque, and the back end of the big Dodge loosened up like a drift car on a wet track. Throttle steer lives at the fleeting whim of your right foot in this car.
It was no big thing to lay off the gas and pull the Hellcat back in line as I entered the highway, but the incident did get me to thinking: What will this car do to me on a road course?

Jeep Wrangler 4xe's hybrid powertrain: Could it be headed to other FCA products?

On its own, the 2021 Jeep Wrangler 4xe plug-in hybrid is a big deal for the brand and the model line. It's the most powerful and most efficient Wrangler by significant margins, and it doesn't give up the off-road capability that makes the Wrangler so special. But another great thing about this hybrid powertrain is its potential to be transplanted into other FCA vehicles. Just to recap, the layout of the Wrangler's hybrid powertrain, front to back, is as follows: engine, clutch, electric motor, clutch, transmission. The engine is the same 2.0-liter turbocharged four-cylinder that's a standalone engine for the Wrangler. The transmission and electric motor are sort of one unit, with the motor and clutch replacing the torque converter of the transmission. And the transmission itself is the ubiquitous eight-speed ZF automatic gearbox. Its transmission code name is 8HP75PH. The ZF eight-speed is available in every FCA product with a longitudinally-mounted engine and rear-wheel drive or four-wheel drive, with variations in the amount of power and torque it can handle. Not only that, but the Ram 1500 and 2500 and the Jeep Wrangler and Gladiator all have powertrains that utilize the non-hybrid version of the 8HP75 transmission specifically. Even the gear ratios for that transmission as well as the 8HP70 used in the Jeep Grand Cherokee, Dodge Durango, Dodge Charger and Chrysler 300 are nearly identical to those in the 8HP75PH. And a Fiat-Chrysler representative confirmed that the transmission portion of the hybrid drivetrain is basically carry-over from the regular 8HP75. So a transplant could be a relatively simple process. As for which of these models would be the most likely to receive the hybrid powertrain first, the Jeep Gladiator and Ram 1500 would seem like good bets, since they likely have the most similar transmissions, and the Gladiator in particular because of its closely-related underpinnings to the Wrangler. Both are also highly profitable trucks that sell well and could justify the development costs of adapting another powertrain. And in the case of the Ram, there's the impending F-150 hybrid to think about. Although Ram isn't going after a fully electric model, a PHEV could be a nice middle ground. A potential limiting factor would be whether the hybrid powertrain would be sufficiently robust to handle heavy payload and towing demands, particularly over longer periods.

Fiat Chrysler posts record Q3 profit thanks to U.S. trucks and Jeep

MILAN — A rebound in car production in Fiat Chrysler on Wednesday reported record third-quarter earnings as production returned to nearly pre-pandemic levels. The Italian-American automaker, which is finalizing its full merger with French rival PSA Peugeot, reported a net profit in the three months ending Sept. 30 of $1.4 billion (1.2 billion euros). That compares with a loss of 179 million euros a year earlier. The carmaker reported adjusted earnings before tax and interest in North America of 2.5 billion euros. That offset deepening losses in Europe, Asia and at its Maserati luxury marquee. Latin America, the only other region to post a profit, saw it narrow by two-thirds to 46 million euros. “Our record results were driven by our teamÂ’s tremendous performance in North America,” CEO Mike Manley said in a statement. Overall, the carmaker said global earnings before tax and interest were a record 2.3 billion euros despite a 6% fall in revenues to 26 billion euros. Global shipments were down 3%, due largely to plant retooling in North American to produce the new Jeep Grand Wagoneer in the luxury SUV segment and the discontinuation of the Dodge Grand Caravan classic minivan. Fiat Chrysler announced earlier Wednesday that its merger with PSA Peugeot is on track to be finalized by the end of the first quarter of 2021, as planned. To meet regulatory concerns, the French carmaker is selling a small stake in a components maker to get below 40% ownership. The new automaker, to be called Stellantis, will be the fourth biggest producer in the world. Earnings/Financials Chrysler Dodge Fiat Jeep RAM Citroen Peugeot