1953 Dodge Coronet Orginial Factory Red Ram Hemi on 2040-cars
Thomasville, Georgia, United States
|
1953 dodge coronet 4 door sedan. original factory 241 red ram hemi. 140 horse power 54,960 actual miles. 3 speed Manuel overdrive transmission. unusual option, cost all most as much as the semi automatic. first year for the hemi in a dodge car. factory weight 3385 lbs. STARTS, RUNS, YARD DRIVES. runs off gas can in engine compartment. gas tank needs to be pulled, cleaned, sealed. has a new fuel pump. stops fair, brake system needs to be flushed and bleed correctly. has rebuilt master cylinder. brake shoes and wheel cylinders are good. front wheel bearings repacked with moly grease. New points (duel) rotor, cap, condenser. Solid frame and steering, has exhaust leak in front pipe about 4 inches long. can be repaired. Good solid car lots of original patina. has some rust in outer rocker panels. have a new set of rocker panels made to fit the car. Rust is not bad I can live with it. Sections of floor board have had homemade repair. solid and clean, I see no need to re do them. center button on glove box is missing, outer is there. headliner would be great except for 3 varmint holes. OPTIONS: radio ( lights up buttons work no sound) heater, back up light, factory turn signals, tinted windows, dealer installed vent shades when new. Engine compartment all factory original , ORIGINAL KEYS. New 6 volt battery. In 1953 Dodge was the winner for the 8 cylinder class for Mobil gas economy run with 25 plus miles pre gallon. equipped with the 3 speed over drive. HISTORY: This car was bought new by a 4th generation farm family in central Alabama. My sister who also lives there has known this family for 43 years. The son of the original owner parked the car in the BARN in 1980 when his dad died. still has the 1980 Alabama tag on it the last year his dad drove it. I bought the car with the help from my sister, 3 1/2 years ago. I had 5 1970,s Mopar Police wheels 15X7. 4 are on the car and 1 is in the trunk. MY buy it now price is very reasonable for a car in this original condition. My reason: I decided to re-do my 1953 Chrysler Imperial. that I have owned close to 50 years. Car sold on a bill of sale: Alabama and Georgia do not issue titles of cars 15 years or older. car should be towed to your location. |
Dodge Coronet for Sale
1970 dodge coronet 440 hardtop 4-door 318 engine(US $4,500.00)
1969 dodge coronet 500 superbee
1965 dodge coronet 500 .. 383 big block . bucket seats.. must see.
66 coronet matching 383/330 hp clean.straight no rust original and excellent fl(US $17,685.00)
Convertible, plum crazy purple, factory a/c, 1 of 147
1950 dodge coronet 33,000 miles !!!!(US $25,000.00)
Auto Services in Georgia
Zbest Cars Atlanta ★★★★★
Zala 24-HR Plumbing ★★★★★
Yancey Tire & Auto Service ★★★★★
Wright`s Car Care Inc ★★★★★
Weaver Brake & Tire ★★★★★
Volvo Specialist ★★★★★
Auto blog
Dodge designer on yellow plastic splitter guards: 'I wish they would take them off'
Mon, Oct 7 2019About a year ago, Dodge began placing yellow strips of plastic on the leading edge of Charger and Challenger front splitters to prevent damage during transport from plant to dealer. Dodge embossed "To Be Removed By Dealer" into the plastic, but those instructions weren't always followed. By summer of 2018, so many owners had left the tabs on, or reinstalled a discarded set, or bought a set on eBay for $100 or more, that factions broke out. Some thought the protectors looked cool, some thought they looked foolish, some thought it didn't matter either way. Now Dodge and SRT lead designer Mark Trostle has stepped in with his thoughts, those being, "I wish they would take them off." Trostle made the remarks at the end of a video by Canadian auto scribe Brian Makse that otherwise dove into the design and technology on the 2010 Charger Widebody. Part of the designer's remarks related to aesthetic aspects — designers are paid to be precious about every line they draw, after all. "When we did the sketch for the Charger and Challenger," he said, "it never had yellow strips on it," and, "To me, as a designer, it ruins the lines of the car." He had a functional reason as well, though: "You're just ruining the paint!" The paint issue convinced Tyler Grant, the Internet sales manager at a Dodge dealer, to make a Facebook post in April this year requesting owners remove the splitter guards. Grant wrote that because the guards aren't specifically molded to fit perfectly, dirt and moisture get between the plastic and the splitter and mar the clear coat or paint, illustrated by a scuffed example that had been driven just 18 miles with the protectors on. He ended with, "Please, on behalf of your splitter AND its paint, take off the splitter guards." Despite forum chatter, splitter-shaming Facebook photos, and Facebook groups like "Hey Pal, You Forgot to Take Your Splitter Guards Off," it appears too late for the protector color to curb (get it?) the trend. Owners have already dealt with the dirt issue by putting protective tape on the air dam, others have painted the spilitter guards to match the car, and the owner of a vintage Dodge pickup ran yellow tape across the width of his front bumper in an attempt to join the party. In the Makse video, Trostle said that the automaker would soon be rolling out a "new fashionable purple color" for the protectors. "We'll see if that one takes off," he said. "I hope it doesn't."
FCA's U.S. sales chief sues company for wrongful retaliation
Thu, Jun 6 2019Some fresh controversy is brewing at Fiat Chrysler Automobiles as The Detroit News reports that the head of U.S. sales has filed a federal whistleblower lawsuit against the company.. Reid Bigland, who's also in charge of the Ram truck brand, alleges that FCA made him a scapegoat for wrongful sales inflation practices and fixing vehicle sales statistics, which are currently under investigation by federal agents. Bigland claims that FCA executives punished him for cooperating with the federal investigators in the case by cutting his pay by more than 90 percent, according to the lawsuit he filed. The plan apparently was to use the money saved to pay for fines following any settlements made with the Securities and Exchange Commission. So far, the lawsuit alleges that FCA cost Bigland over $1.8 million in income. "They had the largest growth in retail sales in 17 years last year and refuses to pay him," Deborah Gordon, Bigland's lawyer in the case, said to The Detroit News. "Why is that? Because he participated in the SEC investigation and they don't like what he said." Bigland claims he just cooperated with the SEC investigation by testifying about FCA's sales reporting, from the time he took the position to the period prior to being appointed the company's U.S. sales chief. "In late 2018, presumably as a way to wrap up their investigation with some result, the SEC suggested to plaintiff that he admit to some wrongdoing as to defendants' monthly sales reporting," Gordon further said in a statement as part of the lawsuit. "The SEC also suggested a resolution involving some penalty to FCA. Because (Bigland) had not engaged in any wrongdoing, and there was no wrongdoing, he declined to do so." However, exacerbating the issue is the fact that Bigland reportedly sold his shares in the company last year, prompting FCA to act against him even more. FCA came under fire recently by federal agents in at least two separate investigations, potentially exposing conspiracy and corruption between company executives and private entities. The investigations are being led independently by the U.S. Attorney's Office and the FBI. So far, eight convictions were reportedly secured, with one including former Fiat Chrysler Automobiles Vice President Alphons Iacobelli, as one of the defendants. Iacobelli was one of the former top labor-relations executives for the automaker.
Dodge says three new variants of the Charger and Challenger are on their way
Fri, Oct 23 2020Introduced in 2008, the current Dodge Challenger is one of the oldest new cars on the American market. It's not ready to retire, and documents published by Canadian union Unifor confirm it will remain in production until at least 2023. Better yet, the company announced it will release several new versions of the car in the coming years. Fiat-Chrysler Automobiles (FCA) narrowly avoided a costly strike by signing a new three-year agreement with Unifor, the union that represents most of its Canadian workers. It pledged to inject $1.58 billion Canadian (about $1.2 billion U.S.) into its local operations while creating 2,000 new jobs in the nation. Some of that money will be allocated to the Brampton Assembly factory located on the outskirts of Toronto, where it will be used to build three new variants of Dodge's Charger and Challenger models. Details about what the company has in store weren't included in the release, but Dodge has shown it's capable of mustering an unusually high level of creativity when it comes to keeping the Challenger and the Charger fresh. Hellcat, Demon, T/A 392, and Super Stock models have joined the range in recent years, and its efforts have paid off, as 60,997 units of the Challenger were sold in the United States in 2019. It even outsold the Camaro and the Mustang during the third quarter of the year. Annual Charger sales jumped by 21% to 96,935 units in 2019. With that said, Dodge's definition of a new variant is murky. It could be alluding to a trim level, an option package, a limited-edition model, or a face-lifted version. Regardless, we're betting they'll be exceptionally powerful. Chrysler will continue to build the 300 in Brampton through 2023, too, but there's no word on what the future has in store for the sedan. It's also relatively old, but it's not faring nearly as well as its Dodge-badged siblings. Sales fell to 29,213 units in 2019, a 37% drop compared to 2018, and the lineup was pared down for 2021. Moving west, the Windsor factory will be retooled to build plug-in hybrid and electric vehicles, and it will be assigned at least one new model, but FCA didn't reveal what it will be, or when we'll see it. Industry whisperings claim that's where the production version of the CES-friendly Chrysler Portal concept will be built.























