Dodge Charger Sxt V6 3.5l on 2040-cars

Auto blog

MotorWeek relives '80s coupes with Dodge Daytona, Ford Escort EXP

Get ready for a wave of nostalgia and the rapid realization of the huge progress in performance cars over the last 30 years. For its latest Retro Review, MotorWeek takes a look back at two, front-wheel drive coupes from the '80s that seem to have entirely vanished from the roads today. Both the 1986 Dodge Daytona CS and the 1986.5 Ford Escort EXP were considered affordable, sporty options in their day, but the passage of time hasn't been kind to either of their specs. The Daytona certainly looks the part of a performance machine with a body that's reminiscent of other '80s coupes, like the third-gen Chevrolet Camaro. However with 146 horsepower and 170 pound-feet of torque from a 2.2-liter turbocharged four-cylinder, acceleration wasn't exactly a strong suit. MotorWeek complained about copious torque steer, as well. The optional CS suspension upgrade package on this Daytona was apparently a nod to Carroll Shelby who was working with Dodge at the time. If anything, the Escort EXP withstands the test of time even worse. As a two-seat coupe, you might have expected Ford's engineers to really turn up the performance to fit the sporty image that the exterior conveyed. That didn't really happen, and depending on which model buyers ordered, they got either 86 horsepower with a 1.9-liter engine or the "high-output" version of that mill with 108 hp.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

FCA to recall 318,000 vehicles for faulty backup camera software

An array of 2019 and 2020 FCA vehicles are being recalled over faulty backup camera software that doesn’t meet federal regulations. According to recall documents, the backup camera may not turn off “until a drive cycle ends.” ThatÂ’s far longer than the 10-second linger time allowed by the rules, so FCA has to recall all of the vehicles to implement a fix. WeÂ’ve listed all of the vehicles involved below. 2020 Jeep Gladiator 2020 Jeep Cherokee 2019-2020 Ram 1500 2019-2020 Ram 2500  2019-2020 Ram 3500 2019-2020 Chrysler Pacifica 2019-2020 Dodge Durango 2019-2020 Jeep Grand Cherokee 2019-2020 Jeep Wrangler 2019-2020 Jeep Renegade 2019 Dodge Challenger ItÂ’s an extensive list encompassing a huge chunk of FCAÂ’s lineup in the United States. In total, FCA is recalling 318,537 vehicles. They must be equipped with the 8.4-inch or 12-inch infotainment system for the problem to present itself. FCA expects the recall to start on May 22 this year and will begin to notify owners soon. To fix the vehicles that may be affected, FCA plans to update the infotainment system at the dealer or over-the-air. If youÂ’ve noticed a screen thatÂ’s sluggish to relinquish its hold on the backup camera feed (or maybe never does), then you have this recall to look forward to. Update: FCA has provided additional information about the repair methodology. Customers will be able to receive an update over the air or have their cars updated at the dealership. Customers will begin receiving notifications this month. Related video: Recalls Chrysler Dodge Jeep Crossover Minivan/Van SUV