2022 Dodge Charger R/t on 2040-cars

Auto blog

VLF Force 1 V10 is a rebodied Viper priced like a Lamborghini

It would appear that Henrik Fisker is done with hybrids. His latest project, called the Force 1, packs an oversized V10 engine with no electric assist in sight and all the environmental credentials of a herd of flatulent cattle. Alongside the Karma-based, Corvette-powered Destino, the Force 1 is the second product from VLF Automotive. Fisker has taken partnership in the new firm as chief designer alongside chairman Bob Lutz and CEO Gilbert Villarreal. The company isn't saying explicitly what the Force 1 is based on, but it doesn't take a CSI team to trace its roots back to the Dodge Viper. Never mind that it's being built in Auburn Hills – the same Detroit suburb where Chrysler is headquartered – or that it was jointly developed by Fisker and professional Viper racer and dealer Ben Keating. It also happens to be powered by an 8.4-liter V10, and there aren't many of those kicking around the industry. Instead of the Viper's 645 horsepower and 600 pound-feet of torque, the Force 1's ten-cylinder engine is optimized to deliver 745 hp and 638 lb-ft. That, according to VLF, is enough to send the coupe rocketing to 60 in 3.0 seconds flat, covering the quarter-mile in under 11 seconds on its way to a top speed of 218 miles per hour. The power is transmitted to the Pirelli PZero rubber through a six-speed manual, but VLF says it will fit it with an automatic at the customer's request. Around that massive engine and two-seat cockpit, Fisker designed a new shape that, for better or for worse, looks way more aggressive than the Viper's. The Force 1's proportions are tellingly super-snake, but the curves are replaced by some very angry-looking angles and vents. Its head- and taillights are ultra thin, and the deep-dish, split-four-spoke wheels seem to visually split the difference between the three-spoke wheels on the original Viper and the five-spoke alloys it wears today. If you doubted the Force 1's origins before, the interior ought to give it away, with its wide tunnel and familiar surfaces. Only VLF has refinished it in leather, suede, and Alcantara, all diamond stitched with contrasting thread to help position this as a more luxurious prospect than the Dodge. It even fit between the seatbacks place for two champagne bottles that we hope nobody would consider consuming before trying to handle that much power. Of course, none of this will come cheap.

Dodge Charger SRT Hellcat Redeye Widebody expected for 2021

As of writing, Dodge still won't confirm that a Charger SRT Hellcat Redeye Widebody exists, even though camouflaged and debadged versions have already been spotted. Furthermore, before the automaker was forced to cancel this year's LX Sprint Fest 15, a poster advertising the event pictured a Charger SRT with a Dodge Demon-like hood, thought perhaps to be a "concept" version of the sedan in question. Once expected as a product for the 2020 model year, the sedan according to Mopar Insiders is now on the way for 2021 with tweaked looks to go with the centerpiece 6.2-liter Hemi V8 with 797 horsepower and 717 pound-feet of torque. The biggest cosmetic change will be the hood, a larger, redrawn center scoop dominating the front and feeding a cold-intake system pulled from the Demon. The two heat extractors move further back on the hood and rotate 90 degrees to face the sides of the sedan instead of facing the windshield. It will be available only in widebody form, and Redeye badges will adorn the grille, fenders, and decklid. Under the skin, changes compared to the Charger SRT Hellcat include a 6,500-rpm redline, 500 rpm higher than the 707-hp Charger Hellcat, a second dual-stage fuel pump, fitment of the SRT Power Chiller and the SRT After-Run Chiller also from the Demon, as well as stronger prop shafts and half-shafts. MI also mentioned the availability of either a standard 2.62 final drive ratio or an optional 3.09 final gear, production intent for concept wheels that were slated to show at LX Spring Fest, and a new SRT Performance Spoiler. The changes could drop the dash to 60 miles per hour a couple of tenths to 3.4 seconds, and get the widebody's top speed back over the 200-mph mark.  The question now is when the sedan will make its debut. MI thinks the Charger SRT Hellcat Redeye Widebody will first greet the public at FCA's What's New media roundup this summer. However, with this month still obscured by coronavirus clouds and even late summer events still being canceled, its impossible to know when we'll get a look at the new muscle sedan. Related Video:    

FCA and UAW deal could mean huge production shakeups

The big labor contract between Fiat Chrysler Automobiles and the United Auto Workers is likely to lead to some very serious production shakeups across the company's North American manufacturing operations. That's according to a new report from Automotive News, which details the sweeping changes at no fewer than five production facilities in Michigan, Illinois, Ohio, Mexico, and Poland. So without further ado, here's what's going where, presented in easy to digest bullet form. Ram 1500 production would move from Warren, MI to Sterling Heights, MI Warren, MI would be retooled for unibody production and would handle the Jeep Grand Wagoneer and could potentially build Grand Cherokees to ease the strain on Detroit's Jefferson North factory Chrysler 200 production would move from Sterling Heights, MI to Toluca, Mexico Dodge Dart production would move from Belvidere, IL to Toluca, Mexic Fiat 500 production, which is currently handled by Toluca, would be concentrated in Poland, where the Euro-spec Cinquecento is built Jeep Cherokee production would move from Toledo, OH to Belvidere, IL to make room for Wrangler and Wrangler Pickup production Like we said, those are some big changes. But, as FCA CEO Sergio Marchionne said in an earlier interview with Automotive News, this kind of shakeup would make a lot of sense. In that August interview the exec said that automakers moved truck production to Mexico because they were "threatened" by the UAW. "The only thing [the UAW] want is to move the truck back. Which is right. If you move the truck back here, which is [the UAW's] domain, [and move] all the cars that we get killed on somewhere else, we could actually make sense of this bloody industry and actually increase the number of people employed in this country and really share wealth because we are making money," Marchionne told AN. News Source: Automotive News - sub. req.Image Credit: Bill Pugliano / Getty Images Plants/Manufacturing UAW/Unions Chrysler Dodge Fiat Jeep RAM Sergio Marchionne FCA toluca warren sterling heights