2014 Dodge Charger Sxt on 2040-cars

Auto blog

Race Recap: Rolex 24 at Daytona was fast and feisty

Let the record show that victory at the 2015 Rolex 24 at Daytona went to the No. 02 Chip Ganassi Racing with Felix Sabates Target/Ford EcoBoost Riley DP driven by Verizon IndyCar drivers Scott Dixon and Tony Kanaan and NASCAR drivers Jamie McMurray and Kyle Larson. The winner did 740 laps to cover 2,634.3 miles in 24 hours and 57.667 seconds. That's a statement to this year's pace in spite of 18 cautions, two more than last year: the Michael Shank Racing Ligier got pole with a time of 1:39.194, slower than last year's pole time of 1:38.270; however, the winning car last year only did 695 laps. The fight for top honors was shaved to a four-car battle over the first third of the event. The No. 02 Ganassi car took the lead on the first lap, swapping it well into the night with the No. 01 Ganassi car, the No. 10 Wayne Taylor Racing Corvette DP, and the defending champion No. 5 Action Express Corvette DP, all of them staying within about 20 seconds of one another. The Action Express car had a fuel connector come loose and lost three laps getting towed back to the pits to have it reattached, but was back in the lead 18 hours in. The No. 01 Ganassi car dropped out with recurring clutch problems 22 hours in, retiring not long after. A race-within-the-race is where the concluding action happened, a seven minute, 30-second dash from the end of the last caution to the checkered flag. During the penultimate pit stops with an hour to go, Dixon was in second place followed Jordan Taylor in the Wayne Taylor Racing DP into the pits but beat him out, taking the lead. The Action Express car was in third. In the last pit stops of the race, Dixon gained even more time, getting a four-second advantage over Taylor. Then a full-course caution came out twenty minutes before the finish when a Prototype Challenge car hit the wall and caught fire, bunching up the field. That closed the pits, but the Wayne Taylor Racing car had to pit during that yellow because of a miscalculation of driver time. No driver can be behind the wheel for more than four hours in a six-hour period but Jordan Taylor was going to go over, so he came in to swap out for brother Ricky. That cost the team any chance of second place, since they took an additional drive-through penalty for entering closed pits. When the track went green again, Sebastien Bourdais in the Action Express car stayed all over Dixon for the final five laps but couldn't get around him.

That thing got a Hemi? Mopar engine kits make it easier to say yes

Thanks to a new kit from Mopar, classic car owners will have an easier time dropping Hemis into their muscle cars. The kit works with Mopar's 345 and 392 Hemi engines (5.7 and 6.4 liters respectively) and with cars built before 1975. The kit will run $1,795 and has everything needed to get one of the above engines running. The parts include a power distribution system, engine computer, engine and chassis wiring harnesses, O2 and intake air temperature sensors, ground wiring and a gas pedal. The kit is also designed to work with a manual transmission, but Mopar says a transmission such as the Torqueflite 727 and 904 can be made to work with the system. As for examples of the kit in action, take a look at the Jeep CJ66 and Dodge Challenger Shakedown that Mopar revealed this week at the SEMA show. Mopar also offers a few other parts to help complete the project, including various oil pans to clear subframes, a set of headers, and accessory drives for power steering and air conditioning. All of these parts are extra cost though. You'll also need an engine, and the 345 starts at $6,070, and the 392 runs $9,335. However, if you happen to already have one from 2014 or newer, that will work, too. Muscle car fans are getting more choices for their engine conversions. Chevrolet Performance already sells crate engines with "Connect and Cruise" kits to get its engines working in classic cars. The General also offers it with more engines. However, for people who want to keep a Mopar engine in their classic Chrysler, Dodge, Plymouth, or Jeep, this is a cool new option. Related Video: Featured Gallery Mopar Hemi V8 Engine Swap Kit Image Credit: FCA Aftermarket SEMA Show Chrysler Dodge Performance Classics FCA engine swap SEMA 2016

The Dodge Challenger plays its trump card: all-wheel drive

Perennially stuck in third place behind the Ford Mustang and Chevy Camaro in sales and enthusiast comparisons, the Dodge Challenger is doing something unconventional for a muscle couple. It's adding all-wheel drive. It's a new feature for Detroit's pony cars – none of the three have ever had it – and it could be a game-changer. Called the Challenger GT, the Dodge launches this winter for a starting price of $34,490. The Challenger GT comes with the Pentastar 3.6-liter V6 rated at 305 horsepower and 268 pound-feet of torque. It teams with an eight-speed TorqueFlight automatic transmission and is estimated to get 18 miles per gallon in the city and 27 mpg on the highway. An FCA spokesperson said no manual transmission or V8 models will be offered on the all-wheel-drive Challenger. It will be on display in January at the Detroit auto show. View 8 Photos All-wheel drive is a widely expected addition for the Challenger. The coupe shares underpinnings with the four-door Charger, which offers an all-wheel drive variant and the cars have similar powertrain offerings (the AWD Charger is also V6 and automatic only). Naturally, the Challenger borrows the Charger's AWD system and during regular driving conditions, the front axle disengages and full torque goes to the back wheels, allowing the Challenger to function as a rear-wheel drive car. It automatically goes back to AWD when more traction is needed. Handling is also fortified with a vehicle dynamic control system. Conversely, the electronic stability control has three modes and can be switched off for drift-happy enthusiasts. The GT has features familiar to other Challenger and Dodge owners, including an 8.4-inch touchscreen radio, Performance Pages (accessible through the Super Trak Pack button), and paddle shifters. A Sport Mode changes shift points to improve acceleration. It all rolls on 19-inch wheels wrapped in all-season rubber. The exterior gets a hood bulge, LED head- and taillights, and a decklid spoiler. The Challenger GT also offers a $995-interior package different than RWD models, adding Nappa leather, Alcantara suede seats, a nine-speaker Alpine audio system, performance steering wheel, and more. All of that is just window dressing. It's all-wheel drive that could be a difference-maker for consumers. The Challenger won't likely be able to take down the Mustang, which will finish 2016 as the pony car sales king.