Auto blog

Dodge engineers trying to shoehorn Pentastar into Dart?

The fact that the Dart's launch has been a pretty dismal affair isn't what we'd call secret. Judging by its mounting inventories and poor critical reception, Dodge's successor to its unloved Caliber has struggled since it hit the market. And while both of those are difficult problems to address, at least their cause is well known - the powertrain.
Even Fiat-Chrysler CEO Sergio Marchionne has acknowledged that the powertrain options in the Dart are substandard, admitting at January's Detroit Auto Show that the powertrains are "less than ideal." Leading with the 1.4-liter turbocharged four-cylinder found in the Fiat 500 Abarth left a bad taste in the mouths of consumers thanks to the laggy engine and dead throttle response (to say nothing of the manual and dual-clutch gearboxes that needed more refinement). The addition of the 184-horsepower 2.4-liter Tigershark in the Dart GT has helped matters some, but apparently Auburn Hills doesn't think it's quite enough.
If rumors are to be believed - get that salt ready - a possible solution may be in the works. A report from Allpar is claiming that Dodge is considering fitting a Pentastar V6 into the Dart's engine bay. As the Mopar-obsessed website points out, the critically acclaimed Pentastar is available in three different sizes - 3.0 liters, 3.2 liters and the original 3.6 liters. We don't get the 3.0 here in the US, but the 3.2 can be found in the new Jeep Cherokee and the 3.6 has been seemingly fitted to every model Chrysler can shoehorn it into.

Dodge Durango Shaker concept: A 392 V8 in front of six Viper seats

When done right, a parts-bin special can be a beautiful thing. This Dodge Durango Shaker concept for the 2016 SEMA show is one such vehicle, and it's easily our favorite Mopar debuting in Vegas. The key, of course, is pulling from the right bins. Take a tour and you'll see Charger, Challenger, and Viper pieces grafted onto this slick crossover. The featured special part is the big, 6.4-liter 392 Hemi V8 that's been dropped under the hood; it's sourced from the SRT Challenger and Charger where it makes 485 horsepower and 475 pound-feet of torque. With that in place, the fabricators cut a big hole in that hood for the Challenger's awesome optional shaker scoop. It wasn't an easy installation; it required a custom spacer for the intake to make sure everything lined up with the hole properly. View 17 Photos Apparently there were some Viper seats lying around, so six of them were stuck into this Durango. Makes sense. It does lose a bit of people-carrying capability as a result, since only two seats fit in each row, and the seats don't fold for extra cargo room. A Dodge spokesperson attested to the fact that all three rows are usable, if not totally comfortable. But then stock third-row seats aren't always that comfortable anyway. Seriously, though, Viper seats. We don't care how comfortable or usable the result is. Although you might not give it a second thought, even the fuel filler needed some special attention. This piece was also lifted from a Dodge Challenger, and it was taken along with the surrounding sheet metal. Because of the different orientation of the filler cover on the Challenger, the builders decided the easiest way to get it to fit was to chop the fuel filler section out and weld it onto the Durango. The designers also put a little blue Stig on the cover. And those are just the cool parts that were hard to install. This Durango features plenty of other slick details, like the custom bumpers, fender flares, and side skirts. Everything is painted B5 Blue with matte black and carbon accents all around. Up front, the bumper hides a pair of fog lights stolen from a Challenger Hellcat – and yes, they're the ones with intakes in the middle. The grille is also a custom piece, losing the standard crosshair design for better airflow. The fender flares cover up some seriously wide, 305-section tires at all four corners, which are hauled down by Hellcat brakes. The rear bumper bumper contains a stylish center-exit exhaust with dual tips.

Mopar introduces winter tire and wheel packages

Winter is coming, and Mopar will try to help drivers stay safe in the cold weather this year by offering a winter tire and wheel package for a variety of FCA US vehicles for the first time. The packages combine everything drivers need to be prepared for slick roads, including winter tires, steel wheels, and Tire Pressure Monitoring System sensors. Even better, the company delivers them mounted, balanced, and ready for installation. Customers can order the bundles from dealers now. Mopar offers packages with the General Altimax Arctic tire on the Dodge Caravan, Chrysler Town & Country, Jeep Cherokee, and Chrysler 200. All- and rear-wheel drive configurations of the Chrysler 300 get the Michelin X-Ice Xi3, and the all- and rear-drive Dodge Charger models use the Continental WinterContact SI. Depending on the vehicle, prices vary between $242 and $292 per wheel, and Mopar will expand the program to even more models next year. Spending the extra money on winter tires really can make a difference. Experts are clear that the specialized rubber simply works better when the weather gets cold. They can shorten braking distances and improve traction – even with all-wheel drive. Plus, winter tires can often last for more than one year, which spreads out the investment. ALL-NEW MOPAR WINTER WHEEL ASSEMBLIES DELIVER ADDITIONAL COLD-WEATHER CONTROL 01/12/15 from Mopar Print this page Add this release to Your Downloads Mopar winter wheel assemblies include winter tire, steel rim, Tire Pressure Monitoring System (TPMS) Assemblies delivered mounted, balanced, ready to install December 1, 2015 , Auburn Hills, Mich. - Winter is coming and just in time, so are all-new Mopar winter wheel assemblies. The all-new Mopar winter wheel assemblies are available for order for a variety of FCA US vehicles. Assemblies include a winter tire, steel rim and Tire Pressure Monitoring System (TPMS), and are delivered mounted and balanced, so you or your dealership can quickly and easily pop off all-season rims and rubber and put on cold-weather appropriate gear. "Mopar is rolling out our first-ever offering of winter wheel assemblies for those customers who desire a little extra control during the cold weather seasons," said Pietro Gorlier, Head of Parts and Service (Mopar), FCA – Global.