2008 Dodge Charger R/t on 2040-cars

Auto blog

Junkyard 1983 Dodge Rampage has Franco-American roots

Lee Iacocca and the K-Cars get most of the credit for saving Chrysler after the company's 1979 bailout by the US government, but the success of the Simca-derived Omnirizon platform was a large, if overlooked, component of Chrysler's early-1980s resurgence. The Dodge Omni and Plymouth Horizon were sold in the United States for the 1978 through 1990 model years, and variants included the 1983-1987 Dodge Charger and the Rampage, this well-worn example of which I spotted in a Denver self-service wrecking yard last week. The early Omnirizons came with a Volkswagen-sourced 1.7-liter engine, but all of the Rampage pickups (and their near-identical Plymouth Scamp siblings) came from the factory with a 2.2-liter K-Car engine making 96 horses. This truck has a 4-speed manual transmission, which would have made it reasonably quick by Malaise Era standards. This one had plenty of body filler and rust, even before the crash that sent it on that final tow-truck ride to this place, so it wouldn't have been worth restoring. Still, we can hope that some of its parts will live on in other L-body trucks. Related Video: Featured Gallery Junked 1983 Dodge Rampage in Denver View 16 Photos Chrysler Dodge Automotive History Truck Classics dodge rampage

eGarage interviews a couple with 65 Vipers

Owning multiple vehicles can be a hassle worth enjoying if you're willing to spend the time and the money required to acquire and maintain them. But when it's hard to make ends meet while underused valuable hunks of metal, plastic and rubber sit happily taking up garage space, journeys into the depths of other people's well-developed automotive obsessions will either bring you and your cars closer together, or compel you to sell them off before you become one of those fanatics. A recent video by eGarage is one of those journeys, and it's not for the faint of heart: D'Ann and Wayne Rauh own 65 Dodge and SRT Vipers in a collection of automobiles that exceeds 100.
We're not sure if the couple has developed heat-resistant calves from stepping over Viper door sills made burning-hot by side-exhaust pipes, but we wouldn't be surprised if they did. We did learn that their obsession with the no-holds-barred sports car started in 2006 with a trip to a dealership to buy just one Viper, which goes to show how innocently car obsessions can start. But the Rauhs seem to be doing just fine - perhaps better - 64 more Vipers later.
Watch the video below for the full story and to see what eGarage claims is the world's largest Viper collection.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat