1969 Dodge Charger on 2040-cars

Auto blog

That thing got a Hemi? Mopar engine kits make it easier to say yes

Thanks to a new kit from Mopar, classic car owners will have an easier time dropping Hemis into their muscle cars. The kit works with Mopar's 345 and 392 Hemi engines (5.7 and 6.4 liters respectively) and with cars built before 1975. The kit will run $1,795 and has everything needed to get one of the above engines running. The parts include a power distribution system, engine computer, engine and chassis wiring harnesses, O2 and intake air temperature sensors, ground wiring and a gas pedal. The kit is also designed to work with a manual transmission, but Mopar says a transmission such as the Torqueflite 727 and 904 can be made to work with the system. As for examples of the kit in action, take a look at the Jeep CJ66 and Dodge Challenger Shakedown that Mopar revealed this week at the SEMA show. Mopar also offers a few other parts to help complete the project, including various oil pans to clear subframes, a set of headers, and accessory drives for power steering and air conditioning. All of these parts are extra cost though. You'll also need an engine, and the 345 starts at $6,070, and the 392 runs $9,335. However, if you happen to already have one from 2014 or newer, that will work, too. Muscle car fans are getting more choices for their engine conversions. Chevrolet Performance already sells crate engines with "Connect and Cruise" kits to get its engines working in classic cars. The General also offers it with more engines. However, for people who want to keep a Mopar engine in their classic Chrysler, Dodge, Plymouth, or Jeep, this is a cool new option. Related Video: Featured Gallery Mopar Hemi V8 Engine Swap Kit Image Credit: FCA Aftermarket SEMA Show Chrysler Dodge Performance Classics FCA engine swap SEMA 2016

No wing, no Hemi. This Dodge Charger Daytona is two-tone and tufted

In between the Dodge Charger Daytona's 1969 debut as a wild, winged NASCAR warrior and the current 2020 Charger SRT Hellcat Widebody Daytona 50th Anniversary Edition with its monster 717-hp Hemi V8, the nameplate had some ... less-glorious years. The nameplate first resurfaced in 1975, when the Charger moved into the "personal luxury" space as a riff on the Chrysler Cordoba. This 1975 Charger Daytona might not be the model's heyday, but damn if this clean machine, surfaced by Barnfinds.com, isn't striking in its own Me Decade kind of way. And this low-miles example is on offer right now on eBay motors. Outside, this dynamic Dodge sports two-tone silver and blue paint, alloy wheels with white-letter tires, and a power sunroof. Inside, we find high-backed split-bench seats with button-tufted vinyl (no "rich Corinthian leather" here). Raising the miles-long hood reveals a 400-cubic-inch, 4-bbl V8, which for 1975 packed 190 horsepower. A far cry from today's 717 horses, perhaps, but still an upgrade over the Charger's standard 360-cubic-inch V8. It may not be the car that pops immediately to mind when someone says, "Charger Daytona," but with less than 12,000 miles showing, this mid-Seventies example is a time warp to a lesser-known era for the marque.   Featured Gallery 1975 Dodge Charger Daytona Dodge Coupe Classics

Junkyard Gem: 1987 Dodge Ram 50

Chrysler began selling Dodge-badged Mitsubishis way back in the 1971 model year, when the Mitsubishi Colt Galant became known here as the Dodge Colt. Later in the decade, a Plymouth Arrow-badged version of the Mitsubishi Triton small pickup appeared here, along with a Dodge version known as the D-50 and — a few years later — the Ram 50. Once Mitsubishi began selling the same trucks here as Mighty Maxes, starting in the 1983 model year, the Ram 50 didn't seem quite so specialÂ… and then the Dakota made its debut for the 1987 model year. Still, when the Triton went to its second generation that same year, Chrysler continued selling it as the Ram 50. Here's one of those second-generation trucks, found in a Denver-area self-service yard last month. At this point, GM had long since stopped selling Isuzu Fasters with Chevrolet LUV emblems, as had Ford with the Courier-badged Mazda Proceed (after developing the all-American S-10 and Ranger, respectively). The decision-makers at Chrysler, however, calculated that the Ram 50 could grab some sales from Dodge truck shoppers who felt that the Dakota was too big for their needs; as a result, the Ram 50 stayed on sale here through 1994. The last Mighty Maxes rolled out of American Mitsubishi showrooms in 1996. The 6G72 V6 engine became available in four-wheel-drive Ram 50s a few years after this truck was built, but in 1987 all Ram 50s came with either the 2.0-liter 4G63 Sirius or 2.6-liter Astron four-banger. This truck has the base Sirius, rated at 92 horsepower. Remember when new trucks came with double-digit horsepower ratings? Most American-market small pickups still had manual transmissions during the middle 1980s, though that would change in a hurry with the dawn of the 1990s and the drop in slushbox prices. This one has the base five-speed. Just barely 100,000 miles on the clock, very unusual for a junkyard pickup of this age (especially one with a thick coat of brush-applied white house paint on the tailgate). Maybe the speedometer cable broke 25 years ago. You don't see many rear-wheel-drive pickups with roll bars. You'll find one in every car. You'll see. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Dodge Ram 50 Commercial 1987 Those other Japanese imports hallucinated the Ram 50 in alarming ways. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.