1968 Dodge Charger Mopar on 2040-cars

Auto blog

2015 Dodge Charger R/T Scat Pack Quick Spin

"Scat Pack" is plucked from The Big Book of Dodge Nameplates to describe what is basically the average of the Charger R/T and Charger SRT 392. Unnecessary horsepower always seems to go down better with a dose of heritage. If you think it's a silly name, just be thankful Dodge didn't call it an S/RT or an R/T-S. In previous years, a similar formulation was known as the SRT8 Super Bee. Going by another name, it's still as sweet and wears the same hurried-looking pollinator on the grille. We do wonder: What has displeased him so, and why does he have wings and wheels? The packaging is at least fresh. All Chargers get updates for 2015, including improved interiors and a Dart-on-steroids exterior redo. The new lines work especially well on the more aggressive models, including this Scat Pack car. Like the Super Bee before it, the Scat Pack gets the 6.4-liter engine from SRT 392; for 2015 it gets a slight output boost to 485 horsepower and 475 pound-feet of torque, respective increases of 15 and 5. It does without the SRT three-mode suspension and comes with cloth seats (leather is an option) to keep the price down. The Scat Pack also has slightly smaller Brembo front brakes, narrower wheels, and different rubber. It does, however, cost eight grand less and is just as quick in a straight line. Intriguing. Driving Notes Scat Pack cars get an electronically controlled active exhaust that we'd call hyperactive. It's loud all the time, opening its widest at startup, idle, and when you ask for any appreciable amount of power. Sport mode supposedly makes a difference, but we couldn't discern loud from louder. It's a delicious and appropriate loudness, with a brassy trumpet tone to it, and the engine makes top-fuel noises at full tilt. The squeal of the rear tires can be heard from every stoplight no matter the road conditions. A light touch avoids leaving a mark if you're so inclined. We weren't. When the tires eventually smear into the realm of traction, this thing is pretty quick – hitting 60 miles per hour takes 4.5 seconds. There's also an adjustable launch control mode if you want to cut out some of the wheelspin. The eight-speed transmission shifts smoothly. Quicker, more-palpable shifts are had in Sport mode, but occasionally the transmission still needs a moment to drop down from seventh or eighth when you mash the throttle. Despite its two overdrive gears, this Charger is still loud on the highway. In a good way. Probably.

Jeep Wrangler 4xe's hybrid powertrain: Could it be headed to other FCA products?

On its own, the 2021 Jeep Wrangler 4xe plug-in hybrid is a big deal for the brand and the model line. It's the most powerful and most efficient Wrangler by significant margins, and it doesn't give up the off-road capability that makes the Wrangler so special. But another great thing about this hybrid powertrain is its potential to be transplanted into other FCA vehicles. Just to recap, the layout of the Wrangler's hybrid powertrain, front to back, is as follows: engine, clutch, electric motor, clutch, transmission. The engine is the same 2.0-liter turbocharged four-cylinder that's a standalone engine for the Wrangler. The transmission and electric motor are sort of one unit, with the motor and clutch replacing the torque converter of the transmission. And the transmission itself is the ubiquitous eight-speed ZF automatic gearbox. Its transmission code name is 8HP75PH. The ZF eight-speed is available in every FCA product with a longitudinally-mounted engine and rear-wheel drive or four-wheel drive, with variations in the amount of power and torque it can handle. Not only that, but the Ram 1500 and 2500 and the Jeep Wrangler and Gladiator all have powertrains that utilize the non-hybrid version of the 8HP75 transmission specifically. Even the gear ratios for that transmission as well as the 8HP70 used in the Jeep Grand Cherokee, Dodge Durango, Dodge Charger and Chrysler 300 are nearly identical to those in the 8HP75PH. And a Fiat-Chrysler representative confirmed that the transmission portion of the hybrid drivetrain is basically carry-over from the regular 8HP75. So a transplant could be a relatively simple process. As for which of these models would be the most likely to receive the hybrid powertrain first, the Jeep Gladiator and Ram 1500 would seem like good bets, since they likely have the most similar transmissions, and the Gladiator in particular because of its closely-related underpinnings to the Wrangler. Both are also highly profitable trucks that sell well and could justify the development costs of adapting another powertrain. And in the case of the Ram, there's the impending F-150 hybrid to think about. Although Ram isn't going after a fully electric model, a PHEV could be a nice middle ground. A potential limiting factor would be whether the hybrid powertrain would be sufficiently robust to handle heavy payload and towing demands, particularly over longer periods.

China own a Detroit automaker? Would the U.S. let that happen?

The news that several Chinese automakers want to buy Fiat Chrysler Automobiles, and that one has even made an offer, elicits some mixed feelings. On one hand, as some have pointed out, it could be a win-win both for China and for FCA's American workers, ensuring the company's survival and opening new markets. On the other hand, this is China, whose trade relationship with the U.S. is the source of considerable scrutiny from the Trump administration — and whose not-a-friend, not-an-enemy status is particularly difficult to gauge right now during heightened tensions with its client state North Korea. So would such a deal pass regulatory muster? One reason that springs to mind for blocking any sale has to do with national security. Chrysler's role as a military supplier dates back to Dodge trucks used by Gen. Blackjack Pershing to chase Pancho Villa in Mexico, and shortly thereafter by American forces in World War I. The Detroit Three automakers were, of course, mainstays of the Arsenal of Democracy of World War II. Even before U.S. entry into the war in December 1941, America's industrial machinery went into overdrive, and Chrysler was one of the biggest cogs. It engineered and built the M3, Sherman and Pershing tanks and trucks for Gen. George Patton's Redball Express. It helped develop a radar-guided antiaircraft gun that knocked German bombers and V1 rockets out of the sky — on one day, shooting down 97 of 101 V1s headed for London. On D-Day, the radar system helped thwart Luftwaffe counterattacks on the beaches of Normandy, and it later helped Allied forces break out at the Battle of the Bulge. Chrysler redesigned the Wright Cyclone engines used by the Boeing B-29 Superfortress, the plane that firebombed Tokyo and dropped the atomic bombs that ended the war. Chrysler even played a secret role refining uranium in Oak Ridge, Tenn., that was used in the Hiroshima bomb and in the ensuing Cold War arms race. It worked on military missiles and was NASA's prime contractor for the Saturn V rocket that put men on the moon. More recently, Chrysler produced the M1 Abrams tank. And of course Chrysler is the keeper of the flame for Jeep, a 75-plus-years military legacy handed down from Bantam and Willys to Kaiser to AMC to Chrysler. The point of this history lesson is to note that in times of war or national emergency, America's industrial might has been called to serve, and may well be called on again.