1967 Dodge Charger on 2040-cars

Auto blog

That thing got a Hemi? Mopar engine kits make it easier to say yes

Thanks to a new kit from Mopar, classic car owners will have an easier time dropping Hemis into their muscle cars. The kit works with Mopar's 345 and 392 Hemi engines (5.7 and 6.4 liters respectively) and with cars built before 1975. The kit will run $1,795 and has everything needed to get one of the above engines running. The parts include a power distribution system, engine computer, engine and chassis wiring harnesses, O2 and intake air temperature sensors, ground wiring and a gas pedal. The kit is also designed to work with a manual transmission, but Mopar says a transmission such as the Torqueflite 727 and 904 can be made to work with the system. As for examples of the kit in action, take a look at the Jeep CJ66 and Dodge Challenger Shakedown that Mopar revealed this week at the SEMA show. Mopar also offers a few other parts to help complete the project, including various oil pans to clear subframes, a set of headers, and accessory drives for power steering and air conditioning. All of these parts are extra cost though. You'll also need an engine, and the 345 starts at $6,070, and the 392 runs $9,335. However, if you happen to already have one from 2014 or newer, that will work, too. Muscle car fans are getting more choices for their engine conversions. Chevrolet Performance already sells crate engines with "Connect and Cruise" kits to get its engines working in classic cars. The General also offers it with more engines. However, for people who want to keep a Mopar engine in their classic Chrysler, Dodge, Plymouth, or Jeep, this is a cool new option. Related Video: Featured Gallery Mopar Hemi V8 Engine Swap Kit Image Credit: FCA Aftermarket SEMA Show Chrysler Dodge Performance Classics FCA engine swap SEMA 2016

Dodge Viper to out-Hell the Hellcat with supercharged V10?

The Viper wouldn't be the Viper if it wasn't the most powerful model under the Chrysler umbrella. But with the arrival of the Hellcat engine in the Dodge Charger and Challenger, the Viper has fallen behind in the bragging rights department: where the new supercharged V8 produces 707 horsepower and 650 pound-feet of torque, the naturally aspirated V10 offers "only" 640 hp and 600 lb-ft - gargantuan output figures by almost any other standard, but crucially behind on the SRT power scale. Conner Avenue is going to have to do something about that.
Although the Hellcat's engine reportedly won't fit under the Viper's hood, SRT is now rumored to have another trick up its sleeve: supercharge the existing V10. According to the Pentastar performance enthusiasts at allpar.com, Chrysler has already taken delivery of the first such prototype engines so that it can begin the process of fitting it into an upgraded Viper.
The spooled ten-pot is tipped to produce around 800 hp and 650 lb-ft of torque. More than that and the Viper's drivetrain, chassis and bodywork would have to be substantially reworked. Though beefier transmissions are available, fitting them would reportedly set off a domino-game of changes required to handle the added torque. Which may be something Chrysler would be prepared to do for the next-generation model, but in the meantime, 800 hp could prove enough to put the Viper back atop the Mopar performance ladder where it belongs, and give it an edge against the new Corvette Z06 to rekindle sales.

Junkyard Gem: 1977 Dodge Colt Mileage Maker Coupe

While Ford and GM each had the resources to develop their own Michigan-designed subcompacts for the dawn of the 1970s— the Pinto and Vega, respectively— Chrysler couldn't afford the huge price tag for such a project. Instead, Chrysler's European operations were tapped for a couple of models that sold well enough on the other side of the Atlantic, giving us the Plymouth Cricket (known as the Hillman Avenger in the UK) and the Simca 1204 (aka the Simca 1100 in France). American car shoppers gave those two models the cold shoulder, but then Chrysler found genuine sales success by making a deal with Mitsubishi to sell the Colt Galant with left-hand drive. This became the Dodge Colt, with sales beginning in the 1971 model year. Though the 1971-1978 rear-wheel-drive Colts were once as commonplace as Corollas or B210s on American roads, they have all but disappeared today. That makes today's Junkyard Find, discovered in a Denver-area yard last week, particularly interesting. This car shows signs of having been in the hands of a speed-crazed enthusiast owner, including an aftermarket steering wheel and one-piece racing seats with slots for five-point harnesses. The primer-gray paint is another clue. The rear-wheel-drive Colts were reasonably quick for their time, and they could be made genuinely quick with basic engine upgrades. This Mitsubishi Saturn four-banger has a tube header, hot-rod ignition system, and a two-barrel (Mikuni-made) Solex carburetor. We can assume there's probably some kind of cam upgrade under the valve cover, too. The shifter is gone, but the original transmission in this car was either the base four-speed or optional five-speed manual. A three-speed automatic was available for $270 (about $1,275 today). Later on, front-wheel-drive Colts (and Mitsubishi Mirages) could be bought with the Twin-Stick overdrive rig, which gave drivers eight forward speeds and the opportunity to make Twin-Stick beer taps. The 1977-1978 Dodge Colt two- and four-door sedans were based on the Mitsubishi Lancer and were a bit smaller than the 1971-1977 cars, while the wagon version moved to the Galant Sigma platform. The build tag shows that this car started life as the cheapest 1977 Colt model, the "Mileage Maker" two-door sedan (Dodge dealers called it a coupe, so that's what I'm calling it in the title).