Supercharged Challenger Srt8 on 2040-cars

Auto blog

2003-04 Dodge Viper recalled for sudden airbag deployment

As if driving the old Dodge Viper (not the fancy new SRT model) isn't intimidating enough, imagine trying to wrangle that V10 beast and then suddenly having the airbags deploy. Yikes. That's apparently what could happen to some 3,660 Viper models from the 2003 and 2004 model years, and as such, Chrysler has issued a recall.
According to the National Highway Traffic Safety Administration, part of the car's airbag control module may fail, causing the bags or seatbelt pre-tensioners to deploy without warning while the vehicle is in operation. That's a dangerous scenario in any car, let alone one offering insane horsepower a near-total paucity of safety nannies should things get squirrely.
Owners will be notified this month about the recall, though a remedy is not expected to be available until later this year. Scroll down for the full NHTSA statement.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Junkyard Gem: 1990 Dodge Colt Vista

The partnership between Chrysler and Mitsubishi started way back in 1971 and led to plenty of Mitsubishis being sold in the United States as Chryslers, Dodges, Plymouths, and Eagles (plus the use of Mitsubishi engines in all manner of Chrysler-built vehicles). The Colt name – used on a series of Galant-, Lancer-, and Mirage-based cars – became a fairly successful brand for Chrysler, and so it was slapped on Dodge- and Plymouth-badged Mitsubishi Chariots. The Colt Vista wasn't a huge sales success, and you won't see many today, but they had a certain following. Here's a rare '90 that I spotted in a Minneapolis self-service wrecking yard over the summer. Just 114k miles on this one, but the rust got pretty bad and that's the most likely culprit for its junkyardization. These cars made good family haulers, although you wouldn't find many of their 2016 counterparts sporting three pedals. Turbo Tom kept it going for quite a while, but rust never sleeps in Minnesota. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. In Japan, the Chariot was sponsored by the terrifyingly disembodied head of Mickey Mouse. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Seats seven actors! Featured Gallery Junked 1990 Dodge Colt Vista View 17 Photos Auto News Dodge Automotive History Hatchback Minivan/Van dodge colt