Srt8 200 Miles Nav Bluetooth Sunroof 6.4l V8 1 Owner Leather 6 Spd Manual on 2040-cars

Auto blog

Dodge Charger Pursuit takes Tesla interior approach

A police car's computer is just as integral to its duties as a set of lights and sirens. The popular approach for these systems is to grab something like a Panasonic Toughbook laptop, add a big, bulky tray to hold it, and use this inelegant setup for running plates and doing all the other things a cop needs to do while on the road. The downside, besides simple aesthetics, is that this arrangement robs the officer's shotgun-riding partner from legroom. Dodge, though, has come up with a far more elegant and functional solution. Taking a page out of Tesla and Volvo's book, Dodge has replaced the five-inch UConnect display and laptop mount in the Charger Pursuit police car with an enormous 12.1-inch, portrait-format touchscreen display. Called, UConnect 12.1, the new system doesn't do away with the old fashioned computer outright. Instead it moves the bulky unit to the trunk, where it can connect to the display via an ethernet cable. This is good for multiple reasons. First, there are no pricey installation or upfitting charges, like there are for most laptop carriages. Secondly, the plug-and-play nature of the new UConnect system won't require the department to buy new laptops. And third, there's no need to retrain officers, since the only thing that's really changing is the input. While the Charger Pursuit will continue to offer redundant audio and HVAC controls, the 12.1-inch display can, at the press of a "button" split to display Fiat Chrysler's familiar 8.4-inch display. Make one more tap on the screen, and the police-issue laptop can be managed through the full touchscreen. The touchscreen will also display a menu bar at the top of the page, which can easily be edited by officers. All it takes is a simple drag and drop from the application menu to the top of the display. According to Dodge, the touchscreen will even play nice when its operator is wearing gloves. "As America's high-performance police vehicle, Dodge Charger Pursuit is going big for 2016, offering a massive, Uconnect touchscreen system that streamlines a law enforcement officer's computer system with our easy-to-use Uconnect system – on an all-new laptop-sized 12.1-inch touchscreen display," said Tim Kuniskis, Dodge and SRT's president and CEO.

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.

Is Mopar readying a special-edition Dart for Chicago?

Chrysler has released the above teaser of a limited-edition Mopar 2013 model that will be unveiled at next month's Chicago Auto Show. Although the automaker doesn't announce what vehicle will get the Mopar treatment, closer investigation of the seats and center console suggest that this car will be a special version of the 2013 Dodge Dart.
This will be the fourth Mopar model in as many years, following on the heels of the Mopar 2010 Challenger, Mopar 2011 Charger and the Mopar '2012 300. There are no details for the Mopar '13 Dart, but we do see that the car will retain the signature black-and-blue color scheme as past Mopar editions. Like these previous models, we expect production of Mopar '13 Dart to be limited to just 500 units.
Scroll down for Chrysler's press release teasing the new Mopar model, and we'll be sure to bring you plenty of live images from the show floor in a couple weeks.