2023 Dodge Challenger Srt Hellcat Jailbreak on 2040-cars

Auto blog

Dodge designer on yellow plastic splitter guards: 'I wish they would take them off'

About a year ago, Dodge began placing yellow strips of plastic on the leading edge of Charger and Challenger front splitters to prevent damage during transport from plant to dealer. Dodge embossed "To Be Removed By Dealer" into the plastic, but those instructions weren't always followed. By summer of 2018, so many owners had left the tabs on, or reinstalled a discarded set, or bought a set on eBay for $100 or more, that factions broke out. Some thought the protectors looked cool, some thought they looked foolish, some thought it didn't matter either way. Now Dodge and SRT lead designer Mark Trostle has stepped in with his thoughts, those being, "I wish they would take them off."  Trostle made the remarks at the end of a video by Canadian auto scribe Brian Makse that otherwise dove into the design and technology on the 2010 Charger Widebody. Part of the designer's remarks related to aesthetic aspects — designers are paid to be precious about every line they draw, after all. "When we did the sketch for the Charger and Challenger," he said, "it never had yellow strips on it," and, "To me, as a designer, it ruins the lines of the car." He had a functional reason as well, though: "You're just ruining the paint!" The paint issue convinced Tyler Grant, the Internet sales manager at a Dodge dealer, to make a Facebook post in April this year requesting owners remove the splitter guards. Grant wrote that because the guards aren't specifically molded to fit perfectly, dirt and moisture get between the plastic and the splitter and mar the clear coat or paint, illustrated by a scuffed example that had been driven just 18 miles with the protectors on. He ended with, "Please, on behalf of your splitter AND its paint, take off the splitter guards." Despite forum chatter, splitter-shaming Facebook photos, and Facebook groups like "Hey Pal, You Forgot to Take Your Splitter Guards Off," it appears too late for the protector color to curb (get it?) the trend. Owners have already dealt with the dirt issue by putting protective tape on the air dam, others have painted the spilitter guards to match the car, and the owner of a vintage Dodge pickup ran yellow tape across the width of his front bumper in an attempt to join the party.  In the Makse video, Trostle said that the automaker would soon be rolling out a "new fashionable purple color" for the protectors. "We'll see if that one takes off," he said. "I hope it doesn't."

Jay Leno's 426-powered 1966 Dodge Coronet 500 is simple and simply fun

This week on Jay Leno's Garage, the man in denim presents one of his most subdued-looking cars, a 1966 Dodge Coronet 500. Despite that, it's one of his favorites. As he shows, the car is nearly free of any unnecessary options, excepting bucket seats and a console shifter. At least those are the only visible options, since the original owner also opted for the massive 426 cu. in. Hemi V8. What Leno really likes about the car is the honking huge V8 combined with the car's simplicity, especially the lack of frivolities like scoops, stripes, and wings. It's finished in a low-key, dark metallic green, and has plain-Jane "dog dish" wheel covers. The one downside to the vehicle is the lack of stopping and turning ability, Leno says, which is not surprising considering the four-wheel drum brakes and lack of power assist. And keep in mind, the Coronet is not a small car. Still, it's a mean green machine, and it sounds great. Leno also demonstrates the engine's capability to chirp the tires going into second gear, despite having a three-speed automatic and a relatively tall 3.23 rear axle gear ratio. Check out the video above to get the whole story and to hear rumbling V8 noises. Related Video:

FCA recalling 63k Jeeps, Vipers and Ram ProMaster City vans

Fiat Chrysler Automobiles has announced a pair of recalls cover nearly 63,000 vehicles. The bigger of the two actions covers manual-transmission-equipped vehicles from 2006, including the Jeep Liberty and Wrangler, as well as the Dodge Viper. FCA engineers uncovered that the clutch ignition interlock switches use a kind of wire that was part of a previous recall campaign. Because of this, the company said that affected vehicles may not start, although in rare cases, "if recommended starting procedures are not followed," the affected vehicles may lurch forward after turning the key. Those recommended starting procedures "include activating the parking brake, placing the shift lever in neutral and pressing the clutch pedal before turning the vehicle's ignition key." Recall number two affects the company's 2015 Ram ProMaster City cargo and passenger vans. Owners will need to report to dealers to have a piece of tape removed from the side-curtain airbags. The tape is added during assembly and in some cases, may not have been removed. That could prevent the airbags from deploying in the event of a crash. Just under 59,000 vehicles are included in the first recall, including 43,874 in the United States, 11,309 outside of North America, 2,944 in Canada and 706 in Mexico. The ProMaster City recall includes just over 3,900 vehicles. FCA claims it's unaware of any injuries, fatalities or accidents related to either recall and will perform repairs free of charge. Scroll down for the official press release on both campaigns. Related Video: Statement: Clutch Ignition Interlock Switch April 23, 2015 , Auburn Hills, Mich. - FCA US LLC is launching a voluntary recall of an estimated 43,874 older-model U.S.-market cars and SUVs equipped with manual transmissions. The Company will replace their clutch ignition interlock switches at no charge to customers. The action follows an investigation by FCA US engineers that discovered these vehicles are equipped with switches that contain a certain type of wire implicated in a previous campaign. The wire, which was temporarily substituted by a supplier for the specified material, may break. As a result, the vehicles may not start, and in rare cases – if recommended starting procedures are not followed – a vehicle may exhibit unintended movement when its ignition key is turned. FCA US is unaware of aware of any related injuries or accidents involving this population of vehicles.