2021 Dodge Challenger Srt Hellcat Redeye on 2040-cars

Auto blog

The Dodge Demon was developed under a cloud of smoke

The Dodge Demon needs no introduction. The car is so full of superlatives that most of it sounds unbelievable until you see and hear it in action. The car was revealed after months of teasers and cryptic messages, but the public weren't the only ones in the dark. From the start, the Demon's development was a closely guarded secret. There were even some within SRT that didn't know about the project. The people behind the car went through a lot of effort to keep it that way. At an event covering the finer details of the Demon's supercharged 6.2-liter V8, Dodge CEO Tim Kuniskis and SRT Powertrain Director Chris Cowland spoke about the smoke and mirrors used to hide the Demon's development. Work on the car progressed for nearly two years before it was made public, with just a small team having full access to the project. Numbers were altered. Secret meetings were held. SRT engineers worked nights and weekends while parts suppliers were given as little information as possible to move progress forward. Preliminary work on the Demon began in April of 2015, not long after the standard Hellcat hit the streets. The goal wasn't to create a faster Hellcat. Kuniskis said that would have been easy. They wanted a single-minded vehicle that could also be driven on the road. It's the same mindset that brought about the Dodge Viper ACR. Dodge wanted a car that could sell the brand to both enthusiasts and non-enthusiasts alike. 840 horsepower is going to raise anyone's eyebrows, including the Camry owner parked down the street. While preliminary work started in April, the final greenlight wasn't given until September. The project was originally going to revive the American Drag Racer, or ADR, name. When we saw the first hints of the Demon last fall, we labeled the spy photo above the Dodge Challenger ADR. It was set to have 10-percent more power and 20-percent more launch force than the already gut-punching Hellcat. It was also only going to have a quarter-mile time in the 10s, just slightly quicker than the Hellcat. Somewhere along the line, the team realized that the ADR wasn't enough. It was just going to be a Hellcat plus, and that wasn't exciting. The main goal was changed: 9s with light. Translated, that means a 9-second quarter mile with light under the tires (read: a wheelie). From that point forward, everything about the Demon's development, from power to suspension to weight, would be done in pursuit of that goal.

Chrysler Recalls Over 566,000 Trucks, SUVs

Fiat Chrysler is recalling more than 566,000 trucks and SUVs in two recalls for malfunctioning fuel heaters that can cause fires and a software glitch can disable the electronic stability control. The recalls bring the newly merged company's total for the year to 6.4 million vehicles worldwide and 5.1 million in the U.S. as it continues to struggle with reliability problems. It was not immediately clear whether those totals were annual records. On Tuesday, its longtime quality chief abruptly left after Fiat Chrysler performed poorly in Consumer Reports magazine's annual reliability rankings. The largest of two recalls announced Wednesday covers almost 382,000 Ram 2500 and 3500 pickups and Ram 4500 and 5500 chassis cabs from 2010 through 2014. In trucks with 6.7-Liter Cummins diesel engines, corrosion on a fuel heater terminal could cause overheating, fuel leaks and fires. Chrysler is not aware of any fires or injuries. Owners could be warned by an odor of diesel fuel. Customers will be notified by letters starting in December. Dealers will install upgraded terminals and fuel heater housings could be replaced. The second recall covers more than 184,000 Jeep Grand Cherokee and Dodge Durango SUVs from 2014. A debris cover over a circuit board in the steering column control module can disrupt communications and disable the stability control. The problem was discovered when dealers started getting reports from customers that electronic stability control warning lights were coming on. Fiat Chrysler says it knows of no crashes or injuries caused by the problem. Technicians will upgrade software to fix the SUVs, and customers will be notified in December. Fiat Chrysler has issued 33 global recalls and 27 in the U.S. so far this year. Doug Betts, its longtime quality chief, left the company to pursue other options after Consumer Reports' survey-based rankings this year showed four FiatChrysler brands at the bottom of its list. Dodge, Ram, Jeep and Fiat performed worst of 28 brands ranked by the magazine. Company spokesman Eric Mayne said Fiat Chrysler's recalls average fewer than 200,000 vehicles each, below the industry average of 301,000. That means the company is responding quickly to problems, he said, adding that eight of its 27 U.S. recalls were announced before the company received any consumer complaints. Chrysler is not alone with a high number of recalls so far this year.

Stellantis aims to eliminate separate inverter, charger to improve EV efficiency

Stellantis has announced that, in collaboration with French battery company Saft and French National Center for Scientific Research, has made significant progress in eliminating two major components of an electric vehicle powertrain: the on-board charger and the power inverter for the motor. The company claims that doing this will allow for better space use in vehicles, as well as improvements in efficiency, cost and reliability of components. As a quick primer, also explained in the below video, the on-board charger and power inverter are sort of translators to get the right current to different parts of the electric powertrain. The on-board charger takes AC power from the grid and converts it to DC to charge the batteries. Then when power goes from the batteries to the electric motor, the power inverter converts that DC power back to AC. These components aren't exactly small. Frequently you'll find them packaged somewhere under the hood. What Stellantis and its cohorts have developed, and have been using on a test vehicle since last summer, are small power inverter boards that can be mounted very closely to the battery packs. They can handle both conversion needs, for charging and discharging, instead of needing two separate devices. The most obvious perk to this is that you can do away with those traditional components and free up more space, either for making smaller vehicles without losing interior volume, or adding space to a vehicle that wouldn't have had it otherwise. There's the additional benefit of reduced weight, something that EVs struggle with. Stellantis also claims improvements in efficiency, reliability, and cost, however, it didn't go into detail as to how this setup would do that exactly. We'll try to get in touch with representatives from Stellantis in order to get more information. We're still a ways out from seeing this technology in production Stellantis vehicles. The company said it aims to apply it to vehicles by the end of the decade. Saft is also looking at using it on stationary battery systems as well. So maybe we'll see it on a 2029 Ram 1500 REV, but for now, we'll be living with traditional chargers and inverters. Related Video: Green Alfa Romeo Chrysler Dodge Fiat RAM Technology Electric