2021 Dodge Challenger R/t Scat Pack Widebody on 2040-cars

Auto blog

FCA issues recall for 300k Dodge Chargers over airbag sensor

Fiat Chrysler Automobiles has issued another recall, this time for the Dodge Charger. The issue stems from an overly sensitive control module that could deploy the side-curtain airbag and seatbelt pretensioner if the door is kicked or slammed too hard. The recall affects certain Charger sedans from the 2011-2014 model years, specifically those manufactured between May 6, 2010, and June 5, 2014. All told, that amounts to an estimated 322,078 units, including 284,153 in the United States, another 13,169 in Canada, 2,484 in Mexico, and 22,272 overseas. Owners of those vehicles will be asked to bring their vehicles in to their local dealers to have the Occupant Restraint Control module recalibrated, and are being advised in the meantime to "exercise caution when closing doors." If this issue sounds familiar, that's because the automaker issued a similar recall for Ram trucks just last week, affecting over 667,000 four-door pickups in the United States alone. Following a further investigation into its passenger cars, FCA found a similar problem with the Charger, whose door design mandated specific calibration of the module in question for that model. The company says it is aware of three minor injuries potentially related to the issue, but no accidents. This campaign is just the latest in a string of recall-related issues to have emerged from Auburn Hills recently. The Ram truck recall was issued in tandem with another airbag-related recall for a further million pickups. Prior to that it called in another 1.4 million vehicles to update their infotainment system software due to a security issue. Another 350,000 Dodge Journeys were called in before that to have their engine covers secured. The National Highway Traffic Safety Administration is expected to issue the company a massive hundred-million-dollar fine for failing to follow proper procedures related to safety and recall issues. Meanwhile, another NHTSA investigation that could have affected 4.7 million units was closed with no further action deemed necessary. And an appeal court judge in Georgia reduced the damages the company will be ordered to pay the family of a child who died in a fire in a Jeep Grand Cherokee. Statement: Occupant Restraint Control Module August 1, 2015 , Auburn Hills, Mich. - FCA US LLC is conducting a voluntary safety recall to recalibrate control modules on approximately 284,153 U.S.-market sedans to prevent inadvertent side-curtain air-bag and seatbelt pre-tensioner deployment.

Rare Dodge Daytona found in barn heads for auction

An American icon is headed to Mecum's Kissimmee, Florida auction next January. Charlie Lyons, owner of a restoration shop focused on old Chrysler products, got a lead on a two-owner 1969 Dodge Charger Daytona that had been sitting in a barn in Glenwood, Alabama for decades. Dodge built 560 Charger Daytonas (Canada and US production) to homologate the model for NASCAR racing, and then that car and the successor Plymouth Superbird terrorized NASCAR tracks for 18 months. The production car, however, 18 feet long and considered ugly, wasn't popular at the time, so many were beat up or simply disappeared. Around 385 are thought to exist today. Lyons said the first owner of this car was the town judge, who bought it for his wife. In 1974 the second owner - just 18 years old at the time - bought it for $1,800 so he could drive it to Panama City, Florida, for Spring Break, and had flames painted on the front fenders and the scallops trimmed in white. Otherwise this barn find is complete and stock, with matching numbers throughout, R4 Charger Red paint and a white tail, bucket seats, center console, three-speed TorqueFlite automatic, and 20,553 miles on the 440-cubic-inch Magnum V8. Hot Rod has the long story of how Lyons found the car and convinced the owner to sell for what he jokingly called "a shoebox full of folded money." Hagerty says a concours-worthy model can command $262,000. Mecum's pre-sale estimate for this Charger Daytona is $150,000 to $180,000. That sounds steep, but Mecum did sell another perfectly restored Hemi-powered 1969 Charger Daytona for $900,000 at this year's Kissimmee auction to actor David Spade. Related Video:

Stellantis invests more than $100 million in California lithium project

Stellantis said it would invest more than $100 million in California's Controlled Thermal Resources, its latest bet on the direct lithium extraction (DLE) sector amid the global hunt for new sources of the electric vehicle battery metal. The investment by the Chrysler and Jeep parent announced on Thursday comes as the green energy transition and U.S. Inflation Reduction Act have fueled concerns that supplies of lithium and other materials may fall short of strong demand forecasts. DLE technologies vary, but each aims to mechanically filter lithium from salty brine deposits and thus avoid the need for open pit mines or large evaporation ponds, the two most common but environmentally challenging ways to extract the battery metal. Stellantis, which has said half of its fleet will be electric by 2030, also agreed to nearly triple the amount of lithium it will buy from Controlled Thermal, boosting a previous order to 65,000 metric tons annually for at least 10 years, starting in 2027. "This is a significant investment and goes a long way toward developing this key project," Controlled Thermal CEO Rod Colwell said in an interview. The company plans to spend more than $1 billion to separate lithium from superhot geothermal brines extracted from beneath California's Salton Sea after flashing steam off those brines to spin turbines that will produce electricity starting next year. That renewable power is expected to cut the amount of carbon emitted during lithium production. Rival Berkshire Hathaway has struggled to produce lithium from the same area given large concentrations of silica in the brine that can form glass when cooled, clogging pipes. Colwell said a $65 million facility recently installed by Controlled Thermal can remove that silica and other unwanted metals. DLE equipment licensed from Koch Industries would then remove the lithium. "We're very happy with the equipment," he said. "We're going to deliver. There's just no doubt about it." Stellantis CEO Carlos Tavares called the Controlled Thermal partnership "an important step in our care for our customers and our planet as we work to provide clean, safe and affordable mobility." Both companies declined to provide the specific investment amount. Controlled Thermal aims to obtain final permits by October and start construction of a commercial lithium plant soon thereafter, Colwell said. Goldman Sachs is leading the search for additional debt and equity financing, he added.