2014 Dodge Challenger Sxt on 2040-cars

Auto blog

Mopar unveils Dodge Challenger Drag Pak [w/video]

Dodge is going drag racing, and it's doing it with an all-new version of the Challenger for NHRA's Sportsman class. FCA's Mopar parts and performance arm announced the new Challenger Drag Pak Friday, showing off a version with a 354-cubic-inch (that's a 5.8-liter, by the way), supercharged V8 and a 426-ci (7.0-liter), naturally aspirated V8 – both Hemis, of course – that can get the big coupes through the quarter-mile in "the eight-second range." While the two engines deliver similar performance, at their base, they're quite a bit different. The supercharged model uses a cast-iron block, while the 426 has aluminum for both the block and head. That said, both models get customized engine calibrations, and are mated to unique, race-spec automatic transmissions. But drag racing is about far more than just outright power. Mopar significantly updated the four-link rear suspension, adding a four-inch rear axle from Strange Engineering, along with an aluminum, nine-inch third member, while the rear-axle housing has been strengthened in general. Both the rear shocks and front struts can be adjusted for rebound and compression, too. Lightweight 15-inch wheels, meanwhile, are shod in super-sticky Hoosier drag radials, with nine inches of tread in back and 4.5 inches in front. The new Challenger Drag Pak should run the quarter-mile in "the eight-second range." In the cabin, there's an NHRA-spec roll cage, a Racepak gauge cluster, and a handsome pair of Sparco racing seats. Outside, supercharged models get blue decals, while naturally aspirated varieties get black stickers, although there's more to the new Challenger dragster's exterior than just its decals. Mopar tweaked the big-scoop hood, promising it's easier to get up to check on the engine, and the designers also added trailer tie-down straps in both the front and rear. While the dragster was the big news today, Mopar officials also announced the two enhanced Scat Pack kits for both the Dodge Charger and Challenger R/T. The 5.7-liter Hemi models gain an extra 56 horsepower and 30 pound-feet of torque in the Scat Pack 2 thanks to a new cam, valve springs, pushrods, and gaskets. The Scat Pack 3, meanwhile, adds 75 hp and 44 lb-ft, on top of the gains from the lower packages. That should be perfect for drivers who wish to snort in the face of their SRT 392-driving friends. The third stage adds a ported cylinder heads, as well as high-flow manifolds and catalysts.

Fiat Chrysler and Peugeot boards meet to finalize merger

MILAN/PARIS — The boards of Fiat Chrysler Automobiles and Peugeot will meet separately on Tuesday to discuss finalizing an initial agreement for a $50 billion merger to create the world's number four carmaker, sources said. A source close to FCA said the two companies could announce the signing of a binding memorandum early on Wednesday, followed by a conference call to explain further details later in the day. The two mid-sized carmakers announced plans six weeks ago for a tie-up to help them deal with big challenges in the industry, including a global demand downturn and the need to develop costly cleaner cars to meet looming anti-pollution rules. Ahead of the meetings, entities representing the Peugeot family, Etablissements Peugeot Freres (EPF) and FFP, unanimously approved a proposed memorandum of understanding for the planned merger, a source familiar with the situation said. FCA and PSA have said they would seek to finalize a deal by year-end to create a group with 8.7 million in annual vehicle sales. That would put it fourth globally behind Volkswagen, Toyota and the Renault-Nissan alliance. PSA's Carlos Tavares will be chief executive and FCA's John Elkann — the scion of Italy's Agnelli family, which controls FCA through their holding company Exor — chairman of the combined company. The group will include the Fiat, Jeep, Dodge, Ram, Chrysler, Alfa Romeo, Maserati, Peugeot, DS, Opel and Vauxhall brands, allowing it to serve mass and premium passenger car markets as well as those for trucks and light commercial vehicles. Related Video:       Chrysler Dodge Fiat Jeep RAM Citroen Peugeot

Dodge debuts 2020 Durango SRT Black appearance package

Dodge is going back to the well with yet another round of aesthetic options for the 2020 Durango SUV, focusing yet again on the high-performance SRT model with a new Black package and optional "Redline" stripes.  Like most of FCA's dress-up packages, these are geared toward the sporty crowd. The SRT Black package adds lots of black and dark gray elements, including gray SRT badges on the grille and fenders, gloss black mirror caps, 20-inch matte gray wheels, blacked-out exhaust tips, a satin black "Dodge" logo on the tailgate, and gray "Durango" and "SRT" tailgate badges.  If you want a little color variety, you can swap out the gray alloys for the existing Brass Monkey accessory wheels at no cost. You can also add the Redline stripe package (shown here), which adds matte black full-length stripes with red accent pin-striping on the outer edges.   And while the package may be called the SRT Black, it's actually available in 10 colors: Billet Silver, DB Black, Destroyer Grey, F8 Green, Granite Crystal, Octane Red, Reactor Blue, Redline, White Knuckle and Vice White. Plenty of cars aren't even available in 10 finishes.  The SRT Black package offers a treatment similar to that of the Blacktop package, which is available on lower trims; Black and Redline are both exclusive to the range-topping SRT model.  The Durango SRT Black will run you $1,495; Redline is an extra $1,295. These packages will make their public debuts at the Chicago Auto Show next week alongside some other goodies from FCA. Stay tuned.  Related Video: