2014 Dodge Challenger Shaker on 2040-cars

Auto blog

2018 Dodge Challenger SRT Demon sheds seats and insulation to drop weight

You've probably already heard that the 2018 Dodge Challenger SRT Demon will be lighter than the Hellcat Challenger – to tune of more than 200 pounds. What you probably don't know is that the Dodge team did it by dropping most of the seats, along with a few other tricks. The Demon loses 113 pounds by making the front passenger seat with its seatbelt (58 pounds) and back seat (55 pounds including restraints and floor mats) optional, which accounts for a large chunk of the weight loss compared to the Hellcat. The Demon also has unique 18-by-11-inch wheels, which are 16 pounds lighter than the Hellcat's, a manual tilt/telescope steering column instead of the powered one, which loses four pounds, and an 18-pound loss thanks to removing 23 noise, vibration, and harshness parts (the Demon will not be a quiet car, to say the least). Another 20 pounds is lost removing the trunk interior trim and spare tire. Still, the Demon gains 17 pounds thanks to the wide fender flares that accommodate the massive drag radials, which also add 3.5 inches to the car's width. For reference, the lightest Hellcat weighs 4,448 pounds with a manual transmission, and the automatic-equipped car comes in at 4,455 pounds. The Demon will be revealed in April before the New York Auto Show, and Dodge will continue to tease its latest satanic muscle couple weekly until then. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

1968 Dodge Super Charger is a super Charger with a supercharger

Mopar's latest custom creation is sure to be in the running for coolest car at this year's SEMA show. It's a 1968 Dodge Charger, a car selected in part because this year marks the car's 50th anniversary, but taken to the extreme and renamed Super Charger. The headliner of the car's radical upgrades is the new "Hellephant" engine. It's a take on the original car's 426-cubic-inch Hemi V8. But this new engine, with the same displacement, is based on the current Hemi V8, and adds a supercharger. All told, it makes a whopping 1,000 horsepower and 950 pound-feet of torque on 93 octane pump gas. It will be available as a crate engine, too. The engine is far from the only impressive change to the car. All over the body are mild to wild tweaks. The wide, uninterrupted grille from the original is still here, but it's a one-piece example now. And instead of hiding the headlights behind doors that have to open for illumination, the lights simply shine through the grille, retaining a clean look even at night. The whole car sits 2.5 inches lower than stock, and it's now four inches wider thanks to the huge fender flares. They house 305-mm-wide tires up front, and 315-mm tires in the rear. Likely the most complicated change to the car is the lengthened wheelbase. There are two more inches between the wheels now, something Mopar did to reduce the front overhang. A close second in complexity are the taillights. They're the same shape as the originals, but now the round elements are actually exhaust outlets. The tips also happen to be the same as those on the Alfa Romeo Stelvio. There are other details that help bring together the exterior. The rain rails have been smoothed out on the roof, the vent windows removed, special 426 stickers have been added, and the fuel door now has a Hellephant badge with a blue background with lots of little Mopar Ms. The interior gets some attention, too. The rear seat has been removed, Dodge Demon style. It gets a custom roll bar designed to be as unobtrusive as possible, even getting the hoop around the seats to roughly line up with where the windows meet. Gauges come from the Mopar catalog, and the steering wheel and seats are from the dearly departed Dodge Viper. They're particularly relevant, as the six-speed manual transmission comes from the Viper, too. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Fiat Chrysler expands Takata airbag recall to 3.3M vehicles

Fiat Chrysler Automobiles is expanding its recall of vehicles equipped with Takata airbags, moving beyond Florida, Hawaii, Puerto Rico and the US Virgin Islands to the greater US, as well as Mexico, Canada and beyond. The affected vehicles, some 3.3 million in total, were built between 2004 and 2007, with many models, including the Dodge Ram 1500, 2500 and 3500, Durango and the Chrysler 300, having been affected by Chrysler's previous recall. Despite the somewhat alarming nature that comes with a recall of this many vehicles, it seems that Chrysler is moving more out of an abundance of caution (and federal pressure) than anything else, saying: "Neither FCA US, nor Takata Corporation, the supplier, has identified a defect in this population of inflators. These components also are distinct from Takata inflators cited in fatalities involving other auto makers. More than 1,000 laboratory tests have been performed on these components. All deployed as intended, but FCA US continues to study the suspect inflators, which are not used in the Company's current production vehicles." Owners of affected vehicles will be notified and asked to report to dealers for a free replacement driver's side airbag. Scroll down for the official press release from FCA. Statement: Global Air-Bag Inflator Replacement December 19, 2014 , Auburn Hills, Mich. - FCA US LLC will replace driver's-side air-bag inflators in an estimated 3.3 million older-model vehicles worldwide, in an expansion of an ongoing regional field action. Neither FCA US, nor Takata Corporation, the supplier, has identified a defect in this population of inflators. These components also are distinct from Takata inflators cited in fatalities involving other auto makers. More than 1,000 laboratory tests have been performed on these components. All deployed as intended, but FCA US continues to study the suspect inflators, which are not used in the Company's current production vehicles. Outside of Florida, one of the areas covered by the original action, no FCA US vehicle has been linked to an air-bag deployment of the type that has raised public concern. Nevertheless, the Company is replacing the Takata components tied to that concern. FCA US is aware of one related injury involving one of its vehicles, an older-model sedan. It occurred in a southern Florida region marked by persistent, high, absolute humidity – a condition believed to be a contributing factor in the air-bag deployments under investigation.