2012 Dodge Challenger Srt8 6.4l 392 Cu In 1owner Less Than 16,000 Miles on 2040-cars

Auto blog

Dodge revives Challenger T/A and Charger Daytona trims for 2017

Dodge is reviving the Challenger's T/A trim and the Charger's Daytona line for 2017. Introduced on iconic Woodward Avenue just days before the annual Woodward Dream Cruise kicks off, the new variants promise more performance hardware and sportier aesthetics. We'll start with the two-door. The Challenger T/A, available with either the R/T trim's 5.7-liter V8 or the fire-breathing 6.4-liter Hemi V8, is inspired by the Challenger T/As of old. That means a less restrictive, 2.75-inch active exhaust system and a conical Mopar air filter. But there's no clear bump in output – Dodge still lists the base 5.7-liter at 375 horsepower and the 6.4-liter model at 485 hp. But hey, they're going to look cooler. Unlike the Challenger Hellcat, which should have it as standard, Dodge is including a Satin Black hood on every Challenger T/A. In fact, Satin Black is a recurring theme on this Challenger's front fascia, roof, rear decklid, and T/A bodyside stripes. And yes, the 20-inch Mopar wheels are black, too – they're also an inch wider than normal. Dodge is offering the T/A in three different trims. The base T/A has everything we described above, while the T/A Plus adds some comfort features like heated and vented Nappa leather seats, an 8.4-inch UConnect system with Apple CarPlay/Android Auto, a six-speaker stereo, and a shortcut button for the Dodge Performance Pages. The T/A 392, meanwhile, adds the 6.4-liter V8, even wider wheels, and Brembo six-pot calipers. If you prefer smoking tires with four doors, there's the new Charger Daytona. No, there's not an enormous wing on the back. But Dodge added the same kind of engine/exhaust upgrades found on the T/A while upping the top speed from 135 to 150 miles per hour. Satin Black features prominently again, with hood and rear fender graphics. The roof is also black. Unlike the Challenger, Dodge is only offering two different versions of the Daytona – the 5.7-liter base model and the 6.4-liter version, called the Daytona 392. Prices for the Challenger T/A start at $38,485, including a $1,095-destination charge, while the T/A Plus adds $2,750. Adding the 392 means shelling out $45,090. For the Daytona, you'll need a check for $40,985 for the 5.7-liter or $46,090 for the 6.4-liter. Orders for the Charger Daytona open in September, while the T/A is a month later. Related Video:

Inner Demon revealed: 840 hp and other jaw-dropping details

After months of teasers, rumors, cryptic messages, and veiled hints, the 2018 Dodge Challenger SRT Demon is finally here, and it's as wonderfully insane as we hoped it would be. Finally we know the facts and figures that Dodge has been hinting at for so long. 840 horsepower. 770 lb-ft of torque. 2.3 seconds to 60 mph. A quarter-mile run of 9.65 @ 140 mph. While pricing hasn't been announced, Dodge is trying to keep it under $100,000. That horsepower figure makes this the most powerful production V8 ever. With those 0-60 and quarter-mile times, it's also NHRA certified as the quickest production car ever. Someone with the means needs to line a Demon up against a Tesla Model S P100D. All that power and all of the Demon's trick launching software and hardware will throw a driver back against their seat with 1.8 Gs. Drivers will be seeing a bit of sky, as the Demon is the first production car to pull a wheelie from a dead stop. Yes, this is all totally and 100 percent street legal. View 48 Photos In order to make all this power, the red-painted supercharged 6.2-liter Hemi V8 has been significantly improved over the Hellcat. It's equipped with a larger 2.7-liter supercharger that turns the boost up to 14.5 psi, redlines at 6,500, and has what Dodge is calling SRT Power Chiller, a system that uses the air conditioning to cool the air coming in through the new Air Grabber hood scoop. In order to keep your engine running time and time again, there is an after-run cooler than cools the supercharger after the car is shut off. The pistons and connecting rods have been strengthened to deal with the higher load. In order to feed enough juice into the engine, the Demon uses dual fuel pumps. We assume that a decent EPA rating wasn't on the top of the engineer's list. Oh, and the Demon can run on 100-octane with the press of a button. With the traditional SRT black and red keys, the Demon actually has three horsepower ratings: 500 with the black key, 808 with the red key, and the full 840 with the red key and 100-octane fuel. Don't worry, even if you have the black key, the Demon will drop the 1/4 mile in 11.59 seconds, still quicker than almost anything around. Most of the rest you already know from the seemingly endless teasers. The Demon wears lightweight wheels with sticky 315/40R18 Nitto drag radials at all four corners.

Here are the Challenger SRT Demon's bare-minimum performance numbers

This week's Dodge Challenger SRT Demon teaser video provides what seems like more concrete evidence than any of the others before it. We say it seems that way because the numbers flashed on the screen are likely not showing us everything the car has to offer. So we're looking at these as the minimum performance stats and expecting Dodge to reveal even crazier numbers alongside the car next month. The video also provides some hints at features and modes the car will offer. Let's pick it apart. First off, there's the performance data from the various SRT Performance Pages screens. The 0–60 mph time is 3.0 seconds, which compares well to the "regular" Hellcat's 3.5-second manufacturer claim. Then there are two 0–100 times: 6.08 and 6.8. An eighth-mile time of 6.6 seconds at 125 mph and a quarter-mile time of 0.5 seconds at 129 mph lead us to believe the driver lifted off the throttle in that second eighth-mile and that the car will actually do the quarter in the low 10s. For reference, Dodge claims an 11.2-second quarter for the Hellcat on its street tires and a 10.8 with race slicks. View 7 Photos We also get a cryptic message about the supercharger boost pressure, which suggests it will be higher than the 11.6 psi of the 6.2-liter Hellcat engine. A graph shows it heading up toward 10 psi but the final spike is obscured by a Demon head. Cute. There's a hint at horsepower and torque numbers in a graph on the Dyno page, which shows both peaking around 750. In every shot of this video, the clock is set to 7:57, which we think means it either has that much power or, well, more. We think there's more to it because it appears that part of the graph above the dyno run shown, which would reach to 800 or 850, has been blanked out. A horsepower total of 808 would be a nice complement to the Hellcat's 707, don't you think? We can see from the shift indicator screen that the car will come with or at least offer the eight-speed automatic that's also available in the Hellcat and other Challengers. That's likely to be the best option for drag racing. The Demon's user-defined shift light feature, which lets you choose an optimal shift rpm for each individual gear, also suggests that a six-speed manual will be available. We'll cover the many modes and settings highlighted in this video in a separate post. There's a lot to discuss. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.