2010 Dodge Challenger 2dr Cpe R/t on 2040-cars

Auto blog

Preserved truck found at the bottom of frozen lake

A fisherman in central Minnesota pulled more than bluegill and bass out of his local fishing hole earlier this month. While ice fishing on Mayhew Lake, a local man was startled when, using an underwater camera to scout for fish, he discovered a vehicle sitting on the lakebed, the SCTimes reported. He immediately called the Benton County Sheriff's office, which sent deputies to examine the vehicle. Once they arrived, the deputies used their own camera to have a look and discovered a late-90s to early-00s model Dodge Ram pickup in roughly 12 feet of water. The Sheriff's department dive team was then dispatched to search the truck and the area surrounding it for bodies or valuables. The truck was lifted from the lakebed through a huge hole in the ice. The Sheriff's office ran the plates and discovered that it was reported stolen in March of 2000 from a nearby address. Investigators believe that given the truck's location, almost 100 yards from the lake's public access ramp and 25 yards from the north shore, that it was driven on to the lake while it was frozen, then allowed to sink to the bottom once the ice melted. Thanks to the lake's frigid waters, the truck was surprisingly well preserved. Aside from a missing grille, a coating of mud inside, and a patina of rust on the sheet metal, there was little damage to the truck despite its long rest in the lake. With an engine full of lake water and the damage done by roughly sixteen freeze-thaw cycles, the truck will never run again, but its condition is a good testament to the build quality of those old Rams. It certainly held up better than that '57 Plymouth Belvedere they buried in the time capsule under the Tulsa city courthouse. News Source: SCTimesImage Credit: Benton County Sheriff's Office Government/Legal Weird Car News Dodge Truck water lake

Chrysler recalls AWD 300, Charger, Ram 1500 over ZF transmission

What do the Chrysler 300, Dodge Charger and Ram 1500 all have in common? Yes, they're all Chrysler products, and two of them are based on the same platform. And we're sure you could find more similarities between them all, but the common trait we're looking at here is that, while they all come standard in rear-drive form, they're also available with all-wheel drive. And it's the transmission in those models that's the subject of the latest recall notice issued by the National Highway Traffic Safety Administration.
The output shaft on the eight-speed automatic transmission supplied by ZF to Chrysler for the AWD versions of the 300, Charger and Ram 1500 is apparently prone to fracture. That in the end could leave the vehicle without power and could, according to the NHTSA investigation, increase the chance of a crash. The vehicle could also roll away if even if left in Park without the handbrake applied.
That's why Chrysler is calling in 4,194 examples of those three models from the 2013 model year. Dealers will be responsible for inspecting the transmissions and, where necessary, replace the entire unit. See the full recall notice below for all the details.

Dodge Durango Shaker concept: A 392 V8 in front of six Viper seats

When done right, a parts-bin special can be a beautiful thing. This Dodge Durango Shaker concept for the 2016 SEMA show is one such vehicle, and it's easily our favorite Mopar debuting in Vegas. The key, of course, is pulling from the right bins. Take a tour and you'll see Charger, Challenger, and Viper pieces grafted onto this slick crossover. The featured special part is the big, 6.4-liter 392 Hemi V8 that's been dropped under the hood; it's sourced from the SRT Challenger and Charger where it makes 485 horsepower and 475 pound-feet of torque. With that in place, the fabricators cut a big hole in that hood for the Challenger's awesome optional shaker scoop. It wasn't an easy installation; it required a custom spacer for the intake to make sure everything lined up with the hole properly. View 17 Photos Apparently there were some Viper seats lying around, so six of them were stuck into this Durango. Makes sense. It does lose a bit of people-carrying capability as a result, since only two seats fit in each row, and the seats don't fold for extra cargo room. A Dodge spokesperson attested to the fact that all three rows are usable, if not totally comfortable. But then stock third-row seats aren't always that comfortable anyway. Seriously, though, Viper seats. We don't care how comfortable or usable the result is. Although you might not give it a second thought, even the fuel filler needed some special attention. This piece was also lifted from a Dodge Challenger, and it was taken along with the surrounding sheet metal. Because of the different orientation of the filler cover on the Challenger, the builders decided the easiest way to get it to fit was to chop the fuel filler section out and weld it onto the Durango. The designers also put a little blue Stig on the cover. And those are just the cool parts that were hard to install. This Durango features plenty of other slick details, like the custom bumpers, fender flares, and side skirts. Everything is painted B5 Blue with matte black and carbon accents all around. Up front, the bumper hides a pair of fog lights stolen from a Challenger Hellcat – and yes, they're the ones with intakes in the middle. The grille is also a custom piece, losing the standard crosshair design for better airflow. The fender flares cover up some seriously wide, 305-section tires at all four corners, which are hauled down by Hellcat brakes. The rear bumper bumper contains a stylish center-exit exhaust with dual tips.