2008 Dodge Challenger Srt8 Convertible on 2040-cars

Auto blog

Junkyard Gem: 1964 Dodge Dart station wagon

The Chrysler A Platform, built from the 1960 through 1976 model years for the North American market (and for a few years beyond that in Australia and Latin America), was one of Chrysler's greatest hits, if not the greatest hit. We know these cars best as the 1963-1976 Dodge Dart and the 1960-1976 Plymouth Valiant, and they established a reputation for reliability matched only by the likes of the Mercedes-Benz W123 diesel. I still see many of these cars during my junkyard wanderings, but A-Body wagons have become very rare. Here's a tattered '64 Dart wagon that I spotted in a self-service wrecking yard in San Jose, California. 1964 was the first model year for factory-installed V8 engines in the Dart and Valiant (and the Valiant's sporty sibling, the Barracuda), and the 273-cubic-inch pushrod V8 was a sturdy powerplant indeed. The slant-6 engine, though less powerful, went into most of these cars, and for good reason: It was harder to kill than all the world's cockroaches and rats put together. This car would have come with a 170- or 225-cubic-inch version of the slant-6, optimistically rated at either 101 or 145 gross horsepower (probably about 55 horses at the wheels), but I didn't feel like scraping sludge off casting numbers to see if it's on its first or 11th engine. In any case, slant-6 Darts were on the pokey side but would get you to your destination every time. This one has a lot of rust for a California car (in New Hampshire or Wisconsin, it would be considered pretty solid) and the interior is more or less obliterated, so even dedicated station-wagon lovers wouldn't have been motivated to take it on as a restoration project. So another early Dart is poised to be stuffed into The Crusher, for reasons that make good economic sense. This still makes us sad, though. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Here's the compact you've been waiting for!

2020 Dodge Charger Hellcat Widebody, Scat Pack Widebody get grip, go faster

You all knew this was coming. Dodge basically showed it to the public a few months ago. But it's finally official, the 2020 Dodge Charger Hellcat Widebody and naturally aspirated Scat Pack Widebody are going into production. Like the Challenger Widebody, the Charger version is defined by its, well, wide body, which is now standard on all Hellcats and an option on Scat Packs. The fender flares add a total of 3.5 inches of width. Dodge also tweaked the front and rear bumpers and added wider side skirts to help the flares blend into the body. The Hellcat gets a unique rear spoiler, whereas the Scat Pack sticks with the same one its scrawnier twin uses. 2020 Dodge Charger Scat Pack Widebody View 20 Photos But the big advantage to this wide body is the fact Dodge can stick way more tire under the Charger. All Charger Widebody models get 11-inch-wide wheels with 305-mm tires at all four corners. Each version gets revised suspension, too. The Hellcat gets stiffer front springs, thicker front and rear anti-roll bars and retuned shocks. The Scat Pack gets a similar update, but without the thicker front anti-roll bars. Both cars also get six-piston front brake calipers from Brembo with two-piece rotors. All these handling upgrades mean the Charger is an even more impressive track machine. Dodge says the Hellcat now pulls 0.96g on a skid pad, and the Scat Pack Widebody does a little better at 0.98g. The Hellcat has also improved its lap time of Chrysler's 2.1-mile test course by 2.1 seconds, and the Scat Pack improved by 1.3 seconds. Both cars are also still fast in a straight line, with Dodge saying the Hellcat will hit 60 mph in 3.6 seconds on the way to a 10.96 quarter-mile time. Which, Dodge proclaims, makes it the world's most powerful and fastest mass-produced sedan. The Scat Pack Widebody will hit 60 in 4.3 seconds on the way to a 12.4-second quarter-mile.

FCA recalls 15k Grand Cherokees, Durangos over brake issues

The Basics: Fiat Chrysler Automobiles is recalling 14,768 examples of the Jeep Grand Cherokee and Dodge Durango, both from the 2015 and 2016 model years, and built between December 9, 2015, and January 14, 2016. The Problem: The left front brake caliper on some vehicles may have been made from the wrong type of iron, and could be prone to crack. A cracked brake caliper may not function properly. Injuries/Deaths: None reported. The problem was discovered by the automaker during testing. The fix: Dealers will need to check the casting date of the component in question, and if necessary, replace the brake caliper. The schedule for carrying out the recall service has yet to be outlined. If you own one: Expect to hear from the manufacturer to arrange an appointment with your local dealer. Related Video: RECALL Subject : Front Left Brake Caliper May Break Report Receipt Date: MAR 23, 2016 NHTSA Campaign Number: 16V168000 Component(s): SERVICE BRAKES, HYDRAULIC Potential Number of Units Affected: 14,768 Manufacturer: Chrysler (FCA US LLC) SUMMARY: Chrysler (FCA US LLC) is recalling certain model year 2015-2016 Jeep Grand Cherokee and Dodge Durango vehicles manufactured December 9, 2015, to January 14, 2016. In the affected vehicles, the left front brake caliper may crack due to being made from an incorrect material. CONSEQUENCE: A cracked brake caliper may lengthen the distance needed to stop the vehicle and increase the risk of a crash. REMEDY: Chrysler will notify owners, and dealers will inspect the front left brake caliper and depending on its casting date, replace it, free of charge. The manufacturer has not yet provided a notification schedule. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S16. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.