1971 Dodge Challenger 340 Convertible Mod Squad, Complete Matching #'s on 2040-cars

Auto blog

Stellantis axed the SRT engineer team, but performance isn't going away

Stellantis has broken up the Street & Racing Technology (SRT) engineering team that created over a dozen high-performance vehicles, including the Dodge Charger Hellcat, but the situation isn't as dire as it sounds. The newly-formed company assigned SRT's former engineers to different positions, where they'll continue to make hot rods. "All of the core elements of the SRT performance engineering team have been integrated into our company's global engineering organization," a spokeswoman told enthusiast website Mopar Insiders. She added that integrating SRT's personnel into other brands in the Stellantis portfolio will ensure that the lessons learned from decades of peddling speed will permeate other products. Previously, SRT operated with a high degree of independence. Don't get too excited. Her statement does not necessarily mean that Citroen will begin building cars powered by the Hellcat engine, though a C3 Chat D'enfer sounds absolutely epic. Technology transfer will likely be limited to fields like aerodynamics and thermal management, and the design department might learn a couple of neat new tricks. Dodge will still move forward with the development of its next SRT-branded cars; the decision to dissolve the SRT team will not affect future models, according to the spokeswoman. Whether they'll be powered by a V8 is up in the air, because company boss Tim Kuniskis warned that regulations are killing the eight-cylinder engine. Similarly, Jeep will continue designing high-performance models, like the Grand Cherokee Trackhawk. What changes is that the model will be developed and designed by a group of engineers and designers from Jeep, not from SRT. SRT is dead, but performance isn't going away. SRT's demise nonetheless marks the end of an era for Chrysler. The division traces its roots to 1989, when some of the company's brightest minds were brought together to develop the first-generation Dodge Viper. It merged with Team Prowler to form the Specialty Vehicle Engineering (SVE) group, which was renamed Performance Vehicle Operations (PVO) in 2002 and finally dubbed SRT in 2004. SRT has operated as the carmaker's in-house tuner since, its resume includes a diverse selection of cars ranging from the Neon SRT-4 to the 1500 TRX, and it was promoted to a standalone brand led by designer Ralph Gilles in 2011. Fiat-Chrysler Automobiles (FCA) axed the SRT brand in 2014 but kept the name and the development team. Related video:

The Hemi deserves to die | Opinion

Hi. I'm Byron and I love V8s. I want them to stick around for a long, long time. But not all V8s are created equal, and I will not mourn the passing of the modern Hemi. You shouldn't either. While we may agree that its death is untimely, if you ask me, that's only because it came far too late.  Stellantis’ announcement of its new, turbocharged inline-six that is all but guaranteed to kill off the Hemi V8 has led to quite a few half-baked internet takes. The notion being suggested by some, that automotive media were brainwashed into believing the Hemi was in need of replacement, is so far divorced from reality that I openly guffawed at the notion. Journalists have been challenging Chrysler, FCA and now Stellantis for years to deliver better high-performance engines. The response has always been the same: “Why?” Why replace a heavy V8 with a lighter, all-aluminum one? Why repackage powertrains for smaller footprints and better handling vehicles? Why be better when “good enough” sells really, really well? I too mourn the departure of good gasoline-burning engines, but since when was the Hemi one? HereÂ’s a quiz: Name every SRT model with an all-aluminum engine. TimeÂ’s up. If you named any, you failed. They donÂ’t exist. This isnÂ’t GMÂ’s compact, lightweight small-block, nor is it a DOHC Ford Coyote that at least revs high enough to justify its larger footprint. The Hemi is an overweight marketing exercise that happened to be in the right place at the right time. That time was 2003, when Chrysler was still Chrysler — except it was Daimler-Chrysler and the "merger of equals" was doing a bang-up job of bleeding the company's cash reserves dry while doing virtually nothing to address its mounting legacy costs. "That thang got a Hemi?" was emblematic of the whimsical, nostalgia-driven marketing of the colonial half of the "marriage made in heaven." That was 20 years ago. 20 years prior to that, emissions-choked American V8s were circling the drain faster than a soapy five-carat engagement ring in a truck stop sink.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat