1970 Dodge Challenger Rt on 2040-cars

Auto blog

Dodge Dart Mopar '13 special edition recalled over airbag woes

Dodge is only building 500 examples of the black-and-blue Mopar '13 Dart, but the majority of them are now being recalled. Part of the Mopar upgrade included replacing the stock seat skins in the Dart with black and blue Katzkin leather, but the seat-mounted side airbags were reinstalled improperly during the upfitting process, which could affect the performance of the front seat side airbags.
According to the official National Highway Traffic Safety Administration bulletin, a total of 374 Mopar '13 cars are being recalled due to side airbags that might not deploy in a side-impact collision. There have been no reports of the airbags not going off, but Chrysler will still need to reinstall the bags to ensure proper deployment. The recall notice is posted below, which gives information for Mopar '13 owners to contact Chrysler and NHTSA.

The Dodge Demon's massive drag tires are just barely street legal

Despite the gaffe that was the Vin Dieselgate leak (no, not that one), Dodge and SRT are soldiering on with the twelve-part Dodge Demon rollout in the lead up to the car's reveal at the New York Auto Show. The Vin Diesel video showed what is almost assuredly the car's front, but now we get an official view of the Demon's rear in this week's video, "Wide Body." Along with the new view, Dodge shows off a cryptic license plate (Michigan #2576@35) and details on the Demon's tantalizing wheel and tire combo. That wheel and tire combo, meant to fill out the Demon's new wide wheel arches, is frankly impressive. Lightweight 18- by 11-inch wheels are wrapped in special Demon branded Nitto NT05R tires measuring an astounding 315/40R18 at all four corners. Not only does that trump the old Camaro Z/28's 305 section tires, it makes the Demon the first production car to come equipped from the factory with drag radials, claims Dodge. Presumably, the goal with the Demon is to provide enough power and grip to rotate the Earth underneath the car rather than propelling the car itself down a dragstrip. Beyond that, few other details were revealed. Dodge provided some vague information about how the "wide-body is laser clearanced, and the entire chassis is e-coated for durability before final assembly," but doesn't actually explain what that really means. We do know now that the flared fenders add 3.5 inches to the Demon's overall width. Overall, the car looks mean and purposeful, especially wrapped in just barely street-legal rubber. Follow along at www.ifyouknowyouknow.com and see if you can find and decipher all the hints. Related Video: Design/Style New York Auto Show Dodge Coupe Performance tires dodge demon dodge hellcat

Jay Leno drives a 1970 Dodge Charger with 1,650 horsepower

When Jay Leno says a vehicle might have too much horsepower, he's got our attention piqued. That's exactly what he thinks about the 1970 Dodge Charger Tantrum from Wisconsin-based SpeedKore Performance. While it still looks like a classic muscle car, the front end now features a carbon fiber hood and fenders. Underneath the lightweight parts, there's a twin-turbo, 9.0-liter Mercury Marine offshore boat racing engine with an astonishing 1,650 horsepower, or an only slightly less asinine 1,350 hp on pump gas. Jay is very mechanically intrigued by the Charger at the beginning of this video, and puts it on the lift to take a look at the underside. The engine plumbing is a thing of beauty, and the mill packs a massive radiator and intercooler to keep things running cool. Leno's drive in the Tantrum is especially interesting. The beastly engine is difficult to control, and anything above half throttle in most gears can spin the rear tires. The significant turbo lag also makes the power unpredictable. When Jay finally finds a straight piece of road, he puts the hammer down and rockets into the distance. And, of course, you know Jay's not going to end the video without some suitably smoking tires. Related Video: