1970 Dodge Challenger R/t on 2040-cars

Auto blog

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.

Dodge Charger Hellcat makes 1,032 hp with Hennessey help

Sometimes you just want four doors. Earlier this week we brought you Hennessey's riff on the Dodge Challenger Hellcat. Now comes the Charger. Much like its two-door sibling, the Charger gets boosted to as much as 1,032 hp and 987 lb-ft of torque (at the crank) thanks to the addition of a twin-turbocharging setup that works with the factory supercharger. The turbo headers and downpipes are stainless steel, and there is a high-flow air-to-water intercooler and dual-turbo waste gates. Hennessey also beefs up the fuel injectors, fuel pump, and the rest of the fuel system. The engine management system and chassis are recalibrated to accommodate all of this. You also get numbered plaques signed by John Hennessey, the boss of the Texas tuning outfit, and the technician who does your build. Hennessey's additions result in zero-to-60 mph sprints in 2.7 seconds, and the big sedan can run the quarter mile in 9.9 seconds at 142 mph. Like the Challenger, the Charger has the same disclaimer: the lofty horsepower figure comes from an engine dyno, and it will be a 15-to 20-percent lower at the rear wheels. Related Video: Image Credit: Hennessey Performance Dodge Performance Sedan Hennessey dodge charger hellcat

Junkyard Gem: 1992 Dodge Shadow America

A quarter-century ago, most Americans looking for a cheap transportation appliance went for cars like the miserably-stripped-down-but-bulletproof Toyota Tercel or the feature-laden-but-reliability-challenged Hyundai Excel. Chrysler, having just discontinued the elderly "Omnirizon" platform, took the Dodge Shadow and its Plymouth sibling, the Sundance and offered a car that was bigger, more powerful, and better-equipped than just about anything else for the price: the America! These cars depreciated hard and nearly all were crushed a decade ago, so sightings are extremely rare today. Here's one that I found in a Northern California self-service yard. This one still had windshield paperwork indicating that it was an insurance-company auction car (probably totaled in a fender-bender that caused $200 worth of damage) and that it was a runner at the time it got junked. Such is the fate of 24-year-old economy cars in rough shape. The Shadow was a member of the many-branched K-Car family tree, and the Shadow America came with the same 2.2-liter straight-4 engine that powered millions of Caravans, Daytonas, New Yorkers, and Lasers. You got more torque than the competition, plus a driver's-side airbag instead of the maddening automatic seat belts found in other low-priced cars of 1992. Of course, the paint tended to peel off within a few years and the build quality of the Shadow was hit-or-miss, but these cars were way nicer to drive than, say, a Tercel EZ or Subaru Justy. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. The perfect cars for an imperfect world! Related Video: Featured Gallery Junked 1992 Dodge Shadow America View 17 Photos Auto News Dodge Automotive History