1970 Dodge Challenger #'s Matching 340 A66 Package Rare Low Production Real Tx9 on 2040-cars

Auto blog

Dodge celebrates big B-day with 100th Anniversary Editions muscle cars

Being in business for 100 years is a HUGE milestone, so we hope Dodge has more in mind to celebrate its centennial than just a special edition package for the 2014 Charger and Challenger. Called the 100th Anniversary Edition package, this collection of cosmetic enhancements will be available in limited quantities for both cars at a cost of $2,500.
Ordering a Charger or Challenger with the 100th Anniversary Edition package means starting with either a V6-powered SXT Plus or V8-powered R/T Plus model. They can each be ordered in many colors, but only the High-Octane Red Pearl Coat above is an anniversary exclusive. Each car also comes with an anniversary-exclusive set of 20-inch, five-spoke wheels with what Dodge calls "Granite Crystal pockets," a texture that's also mirrored on each car's grille.
Of course, there are commemorative badges galore affixed to the exterior of each car, including "Dodge Est. 1914" fender badges and "100" logos on the center caps of each wheel. The styling theme of each car's interior is a bit more interesting, with Dodge designers trying to evoke "the patina and machinist legacy of John and Horace Dodge," the company's founders. To that end, the leather interior can be had in Molten Red or Foundry Black Nappa, and each features a custom cloud overprint that makes the hide look like a working man's dirty dungarees. Designers also used brass-colored accent stitching on the interior's leather trim pieces, and affixed more "Dodge Est. 1914" badges to the front seat backs and floor mats. We do like the flat-bottomed steering wheel, and the Challenger 100th Anniversary Edition gets exclusive white gauges faces and the Charger black. The "100" on each car's speedometer is also highlighted in red.

Chrysler recalling 2009-2010 Ram 1500, Dodge Dakota pickups over axle pinion nut

Chrysler is issuing a recall for the 2009 and 2010 Ram 1500 and Dodge Dakota pickup trucks due to improper installation of the rear axle pinion nut. According to the National Highway Traffic Safety Administration, a total of 44,300 trucks are affected by the recall, and there have been 12 confirmed incidents including one crash.
The issue on both trucks is that the pinion nut is loosening on some trucks due to a lack of thread adhesive, and it is causing the rear axle to lock up resulting in loss of vehicle control. NHTSA's recall notice says that eight incidents occurred at speeds over 35 miles per hour and most also exhibited driveshaft failures as well since the loss of the pinion nut would cause the gear to separate from the driveshaft. In one complaint, the driveshaft separated from the rear axle and punctured the gas tank.
Chrysler will begin sending out recall notices to affected owners in November, but scroll down to see the official NHTSA notice.

Jeep Grand Cherokee, Dodge Durango still catching fire after recall

Automakers issue recalls all the time. It's part of the cost of doing business. We just assume that once the recall has been carried out, the problem in question has been fixed. But that's not always the case, as this latest investigation being undertaken by the National Highway Traffic Safety Administration goes to show. The problem stems back to a recall issued by Chrysler last summer. It revolved rather the sun visor in the SUVs it makes at its Jefferson North Assembly Plant – specifically, the screw affixing the sun visor could end up rubbing against the wiring for the lamp in the vanity mirror, potentially causing an electrical short and even a fire. 62 such short circuits, 38 fires and three injuries reported, prompting Chrysler to recall nearly 900,000 units of the 2011-2014 Jeep Grand Cherokee and Dodge Durango (over 650,000 of them in the United States). The plastic spacers they installed to rectify the problem, however, may not have done the trick. Eight reports (but none involving injuries) have been filed with the NHTSA regarding the same issue recurring, spurring the government agency to open a new investigation into the matter. If deemed necessary, the NHTSA could ask FCA to issue another recall to fix the issue again, which we may necessitate the installation of a fuze to prevent any such the electric short. Related Video: INVESTIGATION Subject : Headliner Fires Date Investigation Opened: MAY 01, 2015 Date Investigation Closed: Open NHTSA Action Number: RQ15003 Component(s): ELECTRICAL SYSTEM , INTERIOR LIGHTING Manufacturer: Chrysler (FCA US LLC) SUMMARY: On July 1st, 2014 Chrysler (FCA US LLC) issued safety recall 14V-391 to remedy a wiring-related fire hazard on the headliner of approximately 661,888 model year (MY) 2011-2014 Jeep Grand Cherokee and Dodge Durango vehicles manufactured between January 5, 2010 and December 11, 2013. The recall was in response to the Office of Defects Investigation (ODI) investigation EA14-001 during which data provided by Chrysler indicates that the fire is caused by an electrical short in the vanity lamp wiring for either one of the sun visors mounted on the vehicle. The sun visors are mounted to the roof of the vehicle through the headliner with three metal screws.