2008 Dodge Caliber Srt4 Sunburst Orange Pearl Call Dave Donnelly (336) 669-2143 on 2040-cars

Auto blog

FCA to recall 318,000 vehicles for faulty backup camera software

An array of 2019 and 2020 FCA vehicles are being recalled over faulty backup camera software that doesn’t meet federal regulations. According to recall documents, the backup camera may not turn off “until a drive cycle ends.” ThatÂ’s far longer than the 10-second linger time allowed by the rules, so FCA has to recall all of the vehicles to implement a fix. WeÂ’ve listed all of the vehicles involved below. 2020 Jeep Gladiator 2020 Jeep Cherokee 2019-2020 Ram 1500 2019-2020 Ram 2500  2019-2020 Ram 3500 2019-2020 Chrysler Pacifica 2019-2020 Dodge Durango 2019-2020 Jeep Grand Cherokee 2019-2020 Jeep Wrangler 2019-2020 Jeep Renegade 2019 Dodge Challenger ItÂ’s an extensive list encompassing a huge chunk of FCAÂ’s lineup in the United States. In total, FCA is recalling 318,537 vehicles. They must be equipped with the 8.4-inch or 12-inch infotainment system for the problem to present itself. FCA expects the recall to start on May 22 this year and will begin to notify owners soon. To fix the vehicles that may be affected, FCA plans to update the infotainment system at the dealer or over-the-air. If youÂ’ve noticed a screen thatÂ’s sluggish to relinquish its hold on the backup camera feed (or maybe never does), then you have this recall to look forward to. Update: FCA has provided additional information about the repair methodology. Customers will be able to receive an update over the air or have their cars updated at the dealership. Customers will begin receiving notifications this month. Related video: Recalls Chrysler Dodge Jeep Crossover Minivan/Van SUV

Highway To Hellcat: Dallas to Vegas with 2,000 HP

Fort Davis, TX. Early November. Late Sunday afternoon. The 1,200 residents of this small town are using their day of rest to quietly enjoy the breeze rolling off the hills. There's an older couple walking down the street, holding hands. A young lady working at a general store, where milkshakes and antacids are purchased at the same counter. It's a peaceful, quaint scene, right down to the tumbleweed rolling across the street and the rickety wooden porches outside the old storefronts. I hit the throttle of the 2015 Dodge Charger SRT Hellcat while turning left onto the road leading toward the town square, sending the sedan's rear end swinging to the right with a few puffs of rubbery smoke. I coast down to the 25-mile-per-hour speed limit and spot the line of Challengers, Chargers, and Vipers in my rear-view mirror, the drivers all mimicking my quick jolt of enthusiasm before pulling up the reigns on their V8s and V10s and idling into Fort Davis. Our posse would roll some 5,000 horsepower of pure American muscle into that small Texas town that day. It was only the first stop on an epic journey that would take us from Dallas to Las Vegas, on a winding route down toward El Paso, up through New Mexico, Arizona, and finally north into Nevada, ending at the ritzy Palazzo casino and hotel on the Vegas strip. It was an opportunity to see parts of America I never knew existed, and a chance to bond with some American cars that until recently, I sort of failed to understand. And most importantly it was an opportunity to drive really, really hard. Charging Through Texas Unless you've driven across it, it's hard to understand the massive space that is Texas. In places, scanning 360 degrees of horizon reveals absolutely nothing. Nothing. On its own, driving from Dallas to El Paso covers some 630 miles. Veer south to Fort Davis and you'll add another 70 onto that, not including the 75-mile Davis Mountain Scenic Loop where I found bliss behind the wheel of this insanely powerful sedan. I always expected to like the Charger Hellcat – comfortable seating for four (five in a pinch), equipped with the latest tech, wrapped in a stylish yet muscular body, like a quarterback in a tux. And it moves. The supercharged 6.2-liter Hellcat V8 pumps out 707 horsepower and 650 pound-feet of torque, which makes for one quick sedan, especially considering its heft.

500+ hp Stellantis 'Hurricane' I6 previews a world without Hemis

After years of rumored development, Stellantis has revealed its new six-cylinder engine family. The 3.0-liter, twin-turbocharged "Hurricane" I6 will offer V8 power, forced induction torque and six-cylinder efficiency in a package designed to fit into any of the company's North American rear-wheel-drive platforms.  What is "V8 power," exactly? Well, in standard output guise, the new I6 cranks out more than 400 horsepower (the specific figure will vary by application) and 450 pound-feet of torque, while the high-output variant is good for more than 500 horses and 475 lb-ft. The final figures will be dependent on the application. We'll save you a little legwork: In current Ram, Jeep and Dodge products, the 5.7-liter Hemi tops out at about 395 hp and 410 lb-ft, give or take, and the 6.4-liter around 485 hp and 475 lb-ft.    This is a clean-sheet design that is only related to the company's turbocharged four-cylinder by some common measurements. The I6 is exclusively direct-injection (no hybrid/port-injection here) and the two I6 variants share 96 common parts, including the block and oil pan design. The differences are found in their internals, intake plumbing, valvetrain components and the turbochargers themselves. Stellantis is not yet ready to share specs or supplier info for the turbos but says announcements will come from its partners soon.  The standard-output I6 has a compression ratio of 10.4:1 and revs to 5,800 rpm. It will run on regular fuel, albeit with reduced performance; 91 octane is recommended for maximum output. The high-output variant has a compression ratio of 9.4:1 and will rev to 6,100 rpm. That one will require premium. The new I6's advantages go beyond basic power output. Every Hemi family engine currently in production is based on an iron block design, so they're heavy. The aluminum-block I6 shaves weight off the total engine package, even if some of that gets added back thanks to the turbos and their associated plumbing. The standard-output I6 weighs 430 pounds, Stellantis engineers told us; the high-output adds just another 11. Fully dressed 5.7-liter V8s are in the 550-560-pound ballpark, and 6.4-liters close in on 600 pounds.  You may be wondering, "Why a clean-sheet gasoline engine now, when the industry is moving toward battery-electrics?" A valid inquiry, and one Stellantis was prepared to address. While the company will be pivoting to electrification over the next decade, it won't be instantaneous.