2013 Dodge Avenger Se on 2040-cars

Auto blog

Brand new cars are being sold with defective Takata airbags

If you just bought a 2016 Audi TT, 2017 Audi R8, 2016–17 Mitsubishi i-MiEV, or 2016 Volkswagen CC, we have some unsettling news for you. A report provided to a US Senate committee that oversees the US National Highway Traffic Safety Administration (NHTSA) and reported on by Automotive News claims these vehicles were sold with defective Takata airbags. And it gets worse. Toyota and FCA are called out in the report for continuing to build vehicles that will need to be recalled down the line for the same issue. That's not all. The report also states that of the airbags that have been replaced already in the Takata recall campaign, 2.1 million will need to eventually be replaced again. They don't have the drying agent that prevents the degradation of the ammonium nitrate, which can lead to explosions that can destroy the airbag housing and propel metal fragments at occupants. So these airbags are out there already. We're not done yet. There's also a stockpile of about 580,000 airbags waiting to be installed in cars coming in to have their defective airbags replaced. These 580k airbags also don't have the drying agent. They'll need to be replaced down the road, too. A new vehicle with a defective Takata airbag should be safe to drive, but that margin of safety decreases with time. If all this has you spinning around in a frustrated, agitated mess, there's a silver lining that is better than it sounds. So take a breath, run your fingers through your hair, and read on. Our best evidence right now demonstrates that defective Takata airbags – those without the drying agent that prevents humidity from degrading the ammonium nitrate propellant – aren't dangerous yet. It takes a long period of time combined with high humidity for them to reach the point where they can rupture their housing and cause serious injury. It's a matter of years, not days. So a new vehicle with a defective Takata airbag should be safe to drive, but that margin of safety decreases with time – and six years seems to be about as early as the degradation happens in the worst possible scenario. All this is small comfort for the millions of people who just realized their brand-new car has a time bomb installed in the wheel or dashboard, or the owners who waited patiently to have their airbags replaced only to discover that the new airbag is probably defective in the same way (although newer and safer!) as the old one.

Hellcrate 6.2-liter V8 delivers plug-and-play Hellcat hype to SEMA

SEMA just provided another entry for the folder marked "What A Time To Be Alive," with Mopar's announcement of the "Hellcrate" 6.2-liter supercharged Crate HEMI engine. Enthusiasts have been desperate to upgrade their vintage rides with the woozy thrills provided by Dodge's Hellcat motor, so Mopar answered. The Hellcrate engine assembly ships in plug-and-play configuration, in specially designed packaging with "Hellcrate" logos. The assembly sells separately from the Hellcrate engine kit, the kit adding a powertrain control module, power distribution center, engine wiring harness, chassis harness, accelerator pedal, ground jumper, oxygen sensors, charge air temperature sensors, and fuel pump control module. The PCM comes programmed with the production-car engine's 707 horsepower and 650 pound-feet of torque. An optional front-end accessory drive kit contributes peripherals like alternator, power steering pump, belts, and pulleys. Don't bother trying to lash up a sleeper 1997 Chrysler Sebring, though; Mopar tuned the Hellcrate for pre-1976 vehicles and manual transmissions. The engine assembly retails for an MSRP of $19,530, and the kit wants a further $2,195. Mopar didn't announce pricing for the accessory drive kit. The engine and kit come with a three-year, unlimited-mileage warranty when bought together. The Mopar Hemi Crate website will be happy to take your orders as of now. For help envisioning the possibilities, stop by Fiat Chrysler's 15,345-square-foot SEMA booth to check out the Limelight Green, Hellcrate-powered 1970 Plymouth Superbird clone worked up by Mark Worman of Velocity's " Graveyard Carz." While you're there you might as well peep Worman's encore, a 1968 Plymouth GTX stuffed with Mopar's 392 Crate HEMI in place of the original 440 big block, and the 1937 Dodge pickup that swallowed a Mopar 345 Crate HEMI. Mopar's come a long way from its original product: antifreeze products. Tomorrow it'll be Jeep's turn to ring the SEMA bells, once the noise dies down from the Mopar-jacked Wrangler Switchback, CJ66 and Jeep Shortcut. You can watch the brand's presentation online at 7:26 p.m. ET/4:26 p.m. PT. Until then, we're going to work the angles on a Hellcrate-powered Plymouth Volare. The sedan, naturally. Because we're practical. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Stellantis previews 4 electric platforms: Here's how they'll be used

Stellantis EV Day is hitting hard and fast this morning, with big news coming from Dodge and Ram and Jeep and the rest. But to support those brand transformations, a core initiative within Stellantis will help it become a leader in electrification. To do that, the group is developing platforms and technologies with cross-shared components and systems. This starts with four flexible BEV platforms: STLA Small, STLA Medium, STLA Large and STLA Frame. As for targeted numbers, they’re lofty: By 2024, Stellantis aims for over 500 miles of range, 0-62 mph in 2 seconds and charging 200 miles of range in 10 minutes. The four platforms will offer battery capacities from 37 kWh to more than 200 kWh. More specifically, STLA Small will offer 37-82 kWh and up to 300 miles of range. STLA Medium will have 87-104 kWh and up to 440 miles. STLA Large will provide 101-118 kWh and up to 500 miles of range. The truck-focused STLA Frame will provide 159-200+ kWh and up to 500 miles of range (and will support an electric Ram 1500 pickup). Chrysler EV Front 34 View 8 Photos Stellantis has big plans for the STLA Large platform, and is currently developing eight vehicles for it in the next three to five years. Examples of possible vehicles shown include a midsize Ram truck and a Jeep off-roader that could fight against the likes of the Toyota 4Runner. Stellantis design boss Ralph Gilles could be seen in a presentation looking over a Chrysler electric crossover based on this platform. We also saw a Wagoneer badge teased momentarily. There was a rendered silhouette of a crossover that looked like it could compete with the Ford Mustang Mach-E. Gilles said the platform would allow Stellantis to “create a long-range luxury sedan, an all-conquering muscle car, a heart-of-the-market DUV, a heart-of-the-market SUV, a very capable Jeep off-roading white-space opportunity vehicle as well as a new mid-sized truck.” See for yourself in this video starting at the 90-minute mark. As for powertrains, Stellantis is developing three electric drive modules with a shared, scalable inverter, and other common components, as well as in-house software to control them. Those drive units will offer from 70 to 330 kW (94-402 horsepower). More specifically, one EDM will provide 70 kW, a second will provide 125-180 kW, while the most potent can produce 150-330 kW.