2012 Se Used Cpo Certified 2.4l I4 16v Fwd Sedan Premium on 2040-cars

Auto blog

Stellantis expects strike to cost it $795 million in third-quarter profits

MILAN — Automaker Stellantis said Tuesday that the autoworkers strike in North America is expected to cost the company around 750 million euros ($795 million) in profits — less than its North American competitors. The Europe-based maker of Jeep, Fiat and Peugeot reported a 7% boost in net revenues to 45.1 billion euros, with production halts caused by the strikes costing the company 3 billion euros in sales through October. The net revenue boost was due to higher volumes in all markets except Asia. Chief Financial Officer Natalie Knight told journalists that StellantisÂ’ strike impact was lower than the other Big Three automakers due to its global profile as well as some high-profile cost-cutting measures, calculating the hit at around 750 million euros ($795 million.) GM, the last carmaker to reach a deal to end the strike, reported an $800 million strike hit. Ford has put its impact at $1.3 billion. “We continue to be in a very strong position globally and in the U.S. This is an important market for us, and weÂ’re highly profitable and we are very committed to our future," Knight said. “But mitigation is core to how we act, and how we proceed.” Stellantis has canceled appearances at the CES technology show in Las Vegas next year as well as the LA Auto Show, due to the strike impact. Stellantis on Saturday reached a tentative agreement with the United Auto Workers Union to end a six-week strike by more than 14,000 workers at its assembly plants in Michigan and Ohio, and at parts warehouses across the nation. Stellantis does not report full earnings for the third quarter, instead providing shipments and revenues. It said that global sales of electric vehicles rose by 37% over a year earlier, powered by the Jeep Avenger and commercial vehicle sales. North America continued to be the revenue leader, contributing 21.5 billion euros, an increase of 2% over last year, and representing nearly half of global revenues. Europe, the next biggest performing region, saw revenues grow 5% to 14 billion euros, as sales rose 11%. Related video: Earnings/Financials UAW/Unions Alfa Romeo Chrysler Dodge Fiat Jeep Maserati RAM

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

This government surveillance van is both cool and creepy, and it could be yours

Whether you're planning a heist and need to gather information, or you're a government agency tracking down the leader of a crime ring, Hollywood has taught us that the unmarked van is the ideal machine for gathering intel. And apparently that's not just a Hollywood trope, because you can buy this actual, honest-to-goodness ex-government surveillance van: a 1998 Plymouth Grand Voyager. It's being sold by the Chicago suburb of Streamwood, Ill., on the government surplus auction site GovDeals. According to the description, the van was acquired by the town as part of a drug seizure and converted to surveillance duty. It looks like a plain white Grand Voyager for the most part, except for the amber flashing light on the roof. Or at least it looks like a light. It's actually the disguise for the camera periscope. Open up the sliding door of the van and you'll discover a swivel mount for the camera, a TV mounted to the back of the driver's seat, and a toolbox that holds all the electronic equipment, including battery chargers for the van and the camera. There are also solid panels behind the windows so that people walking by can't peer in and see all the equipment. It's a bit less wild than some of the vans we've seen on film, but those Hollywood vans are usually larger commercial vans that can store more people and stuff. Less interesting details include the fact that this Grand Voyager has a 3.3-liter V6 with an automatic transmission. It has just over 100,000 miles and was good for a little more than 150 horsepower and 200 pound-feet of torque when it was new. The interior looks impressively clean, as does most of the exterior, but the description and photos highlight the fact that the front strut towers are rusty and in need of repair. Included are new strut towers, but obviously the welding in and painting is the expensive part. Also, while we think this van is pretty neat, since it's an actual surveillance van like we've seen on film for years, we would feel creepy actually owning it. After all, it's a vehicle for watching people, and while a government might have a legitimate reason for doing that, your average person doesn't. Unless you need a prop for a film, are going to show it off at car shows, or are another city government needing a cheap surveillance car, we think having this would be a little too weird. But if you have one of those reasons, or are less worried about what people think, you have a few more days to bid.