2013 Viper Srt Gts Coupe Leather Loaded With Nav on 2040-cars

Auto blog

Junkyard Gem: 1987 Dodge Ram 50 with V8 swap

Chrysler did very well selling Mitsubishi Forte pickups with Plymouth and Dodge badging in the United States, even after Mitsubishi began moving the same trucks out of their own American dealerships in 1982. The 1987 Ram 50 2WD short bed weighed in at just over 2,500 pounds, so it was reasonably perky with its 2.0-liter G63B four-banger making 90 horsepower… but there's no replacement for displacement! At some point along the line, a Chrysler small-block V8 engine found its way into the engine compartment of this truck, now residing in a car graveyard in Sparks, Nevada. This was the cheapest new Dodge-branded pickup Americans could buy as a 1987 model, though it had to compete with its near-identical Mitsubishi Mighty Max twin for sales. The 1980s were great times for little pickups in the United States, but a desire for bigger cabs and more creature comforts doomed them by the dawn of the following decade. The most interesting thing about this engine swap is that it didn't involve a Chevrolet or Ford small-block V8. Both the Chevy small-block and Ford Windsor V8s are a few inches narrower than the Chrysler LA-series V8, which makes them easier to stuff into a small vehicle. It appears that engine length was the critical dimension in this case, since the Mopar seems to have had enough side-to-side clearance to avoid any slicing of Mitsubishi steel to make it fit. My guess is that whoever did the swap happened to have the engine handy and that's why it's here. Keeping it all Dodge might have been a factor in the decision as well, though the truck's Mitsubishi ancestry makes that unlikely. It was over 100°F out when I found this truck, so I wasn't motivated to check block casting numbers to determine exactly which LA engine we're dealing with here. The easiest LAs to get cheap for the last four or so decades have been the 318 (5.1-liter) and the 360 (5.8-liter), so one of those two is the most likely candidate here. Power levels for these engines got pretty dismal during the Malaise Era, but anyone with the wrenching skills to do this swap would have applied some basic power-enhancing wizardry before the engine went in. We can see there's an Edelbrock Performer intake manifold, and you might as well stab in a better camshaft if you're upgrading the intake. How much power? With a four-barrel carburetor on a dual-plane intake plus a meaner cam, 300 to 350 horsepower is easily achieved with one of these engines, even with stock exhaust manifolds.

Junkyard Gem: 1990 Dodge Daytona Shelby

Once Lee Iacocca took the helm at Chrysler and shifted nearly all car models to front-wheel-drive platforms — either members of the convoluted K family or descendants of the Simca-derived Omnirizon platform — he called up his pal Carroll Shelby and made a deal to help with the design of some Shelby-ized, turbocharged Dodges. This relationship resulted in the Shelby Charger starting in 1983 and the Omni GLH in 1984. For 1987, the K-based Dodge Shadow and Daytona got the Shelby treatment, and suddenly the roads of North America were awash in Shelby-badged turbocharged machinery. Most are long gone by now, but I managed to unearth this tattered and rusty '90 Shelby Daytona at a Denver yard. The Shelby Daytona stayed in production through the 1991 model year (when the car got both Shelby and IROC badging, and does anybody remember the IROC Daytona today?), but most of the examples I've found during my wrecking-yard explorations have been earlier models. You won't find many '90 or '91 Daytona Shelbys. Some junkyard shopper pulled the cylinder head and all the turbo-related goodness before I reached this car. That makes sense, because the 1990 Daytona Shelby's turbocharged 2.2-liter engine made 174 horsepower— way more than most previous turbo Chryslers. Maybe someone hot-rodded their Plymouth Caravelle with those parts. This car has the five-speed manual transmission, as it should. Note the New Car Scent Little Tree, which is the second-most common junkyard-found air freshener (after Black Ice). It's not hard to identify the main reason this car got discarded: catastrophic (by Colorado standards) body rot. 171,349 miles is pretty decent for a nervous turbocharged car from 30 years ago. I don't see many Colorado junkyard cars with brewery and/or skiing-related stickers that don't also have stickers from cannabis dispensaries, but here's one. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Pretty much just as good as the Porsche 911 Turbo, and $70,000 cheaper! Featured Gallery Junked 1990 Dodge Daytona Shelby View 21 Photos Auto News Dodge Automotive History Coupe Carroll Shelby shelby Junkyard Gems

Dodge designer on yellow plastic splitter guards: 'I wish they would take them off'

About a year ago, Dodge began placing yellow strips of plastic on the leading edge of Charger and Challenger front splitters to prevent damage during transport from plant to dealer. Dodge embossed "To Be Removed By Dealer" into the plastic, but those instructions weren't always followed. By summer of 2018, so many owners had left the tabs on, or reinstalled a discarded set, or bought a set on eBay for $100 or more, that factions broke out. Some thought the protectors looked cool, some thought they looked foolish, some thought it didn't matter either way. Now Dodge and SRT lead designer Mark Trostle has stepped in with his thoughts, those being, "I wish they would take them off."  Trostle made the remarks at the end of a video by Canadian auto scribe Brian Makse that otherwise dove into the design and technology on the 2010 Charger Widebody. Part of the designer's remarks related to aesthetic aspects — designers are paid to be precious about every line they draw, after all. "When we did the sketch for the Charger and Challenger," he said, "it never had yellow strips on it," and, "To me, as a designer, it ruins the lines of the car." He had a functional reason as well, though: "You're just ruining the paint!" The paint issue convinced Tyler Grant, the Internet sales manager at a Dodge dealer, to make a Facebook post in April this year requesting owners remove the splitter guards. Grant wrote that because the guards aren't specifically molded to fit perfectly, dirt and moisture get between the plastic and the splitter and mar the clear coat or paint, illustrated by a scuffed example that had been driven just 18 miles with the protectors on. He ended with, "Please, on behalf of your splitter AND its paint, take off the splitter guards." Despite forum chatter, splitter-shaming Facebook photos, and Facebook groups like "Hey Pal, You Forgot to Take Your Splitter Guards Off," it appears too late for the protector color to curb (get it?) the trend. Owners have already dealt with the dirt issue by putting protective tape on the air dam, others have painted the spilitter guards to match the car, and the owner of a vintage Dodge pickup ran yellow tape across the width of his front bumper in an attempt to join the party.  In the Makse video, Trostle said that the automaker would soon be rolling out a "new fashionable purple color" for the protectors. "We'll see if that one takes off," he said. "I hope it doesn't."