2008 Dodge Viper Srt10 Convertible on 2040-cars

Auto blog

The Dodge Demon's massive torque wrinkles its massive tires

Horsepower doesn't mean a damn thing if a car can't properly put the power down. That's why Dodge has fitted the upcoming Demon with some of the stickiest road-legal rubber available. Those Demon-branded Nitto NT05R drag radials skirt by regulations with just the smallest of margins, and in order to maximize the potential of the 315/40R 18 size tires Dodge increased the car's torque multiplication with a higher stall speed for the torque converter and a 3.09 rear axle. The 12.6-inch-wide tires are fitted to 18x11-inch wheels at all four corners, and they're fatter than those 305-section front tires on the Camaro Z/28 that we raved about years ago. Dodge says the combination of soft, gooey rubber and the new gear ratio gives the Demon about a 15 percent larger tire contact patch, more than twice as much grip, and roughly an 18 percent increase in both converter torque and rear-axle torque multiplication. Simply put, the Dodge Demon moves. You can see the results in the teaser video above, which is titles "Multiplication" and shows the crazy wrinkling of the sidewall that results from putting that torque to the road. We wouldn't be surprised if the inner rim of the wheel needs some grip to keep the tire seated, something Chevy had to do on the last Z/28. There is something wonderful about Dodge's approach to performance cars. While the Ford Mustang and Chevrolet Camaro have moved on from their muscle car upbringings with proper track-focused models, Dodge has stayed true to its roots by developing a machine that's sole intent is traveling a quarter-mile quicker than anything else on the road. Twisty roads may be fun, but there is something wholly and deeply satisfying about going deep into the accelerator with a comical amount of power at your disposal. We can't wait. Related Video: New York Auto Show Dodge Coupe Performance dodge demon dodge hellcat dodge challenger srt demon drag strip

Dodge could enter Peugeot's Le Mans-bound 9x8 hypercar in IMSA races

Fiat-Chrysler Automobiles (FCA) and PSA Group merged under the Stellantis umbrella in early 2021 to achieve economies of scale, and this benefit could surprisingly extend to racing. Executives are debating whether to give Dodge its own version of Peugeot's recently-unveiled 9x8 hypercar to race in America, according to a recent report. "While we only heard [the new rules] confirmed a week ago, it has certainly led to some very open discussion, not only about whether Peugeot might add races in the United States, but also about whether the spine of this car might have opportunities with other brands in the Stellantis Group. There are no conclusions yet, but there are now open discussions," affirmed Jean-Marc Finot, the Senior Vice President of Stellantis, in an interview with Racer. His comments refer to an agreement signed in July 2021 by the Automobile Club de l'Ouest (ACO), the Federation Internationale de l'Automobile (FIA), and the International Motor Sports Association (IMSA). They chose to align their technical regulations to let manufacturers compete in different events on both sides of the pond without going through the resource-consuming process of developing a specific car for each series. As of writing, the Le Mans Hypercar (LMH) and Le Mans Daytona h (LMDh) categories fall under the newly-announced common set of rules. On the surface, this means Peugeot could enter its 9X8 (pictured) in the WeatherTech SportsCar Championship as soon as the 2023 season. While this is seemingly under consideration, Peugeot has little to gain from winning a major race in the United States. It hasn't sold cars here since 1991, and its long-mooted comeback was canned after PSA merged with FCA. Giving a variant of the 9X8 to Dodge is a more credible possibility, according to Racer. If not Dodge, then who else? Chrysler hasn't been linked to racing or performance for decades. Jeep is no stranger to performance vehicles, but IMSA would be pushing it. Ram is Ram, while Fiat, Alfa Romeo, and Maserati are rooted in Europe. The rest of the Stellantis brands (like Opel, Lancia, and Citroen) are not distributed in America. Nothing is official, and the publication stressed it's unclear whether Dodge will commit part- or full-time to the series (assuming the program receives the green light). Finot underlined the parallel car would use the 9X8's "spine," so don't expect to see a Peugeot hypercar with a Dodge emblem driving flat-out on the Sebring International Raceway.

1972 Dodge Challenger on an M1009 CUCV military frame is YES

The subject of this post is cause for celebration, not reason to ask "But why?" We don't know why this random Craigslist seller chose to marry the body of a 1972 Dodge Challenger with the frame and axles from a 1987 Chevrolet M1009 military vehicle. We're here to appreciate it, thanks to The Drive, and maybe spend some time after dinner considering whether to buy it. Now that we're on the same page, an owner in Tucson wants to rid his garage — or his Bullet Farm — of what appears to be an exceptionally well built conversion. Starting from the bottom, the M1009 CUCV, for Commercial Utility Cargo Vehicle or "Cuckvee," emerged from a program turning K5 Blazers into supply rigs that were meant to support hardcore hardware like the AM General Humvee. The M1009 got GM's 6.2-liter Detroit Diesel V8, a TH400 transmission, an NP-208 chain-driven transfer case, a 10-bolt rear axle and 3.08 gears. Produced from 1983 to 1987, they returned "less than desirable" results in the field and the military unloaded them. Not much of that remains for this build. The diesel got dropped, replaced by a 5.7-liter GM gasser with a four-barrel carb and long-tube headers, shifting though a 4L80E automatic transmission attached to a U.S. Shift Quick 1 transmission controller in the cabin. The seller doesn't mention output, but if it's a more recent Chevy 350 then it'll certainly provide a healthy bump over the maximum 160 horsepower from the diesel, especially running through a custom Flowmaster dual exhaust. An NP-205 two-speed transfer case switches between 2H, 4L, and 4H. The Dana 44 front and Dana 60 rear axles feature lockers and 3.52 gearing in back. Skyjacker Black Max provides the suspension to keep the 37-inch BFG KM2 on the pavement or the dirt. About 11,000 miles ago the owner rebuilt and upgraded the drivetrain, installing new accessories like a high-rise intake, four-core radiator, new alternator and Holley fuel pump. Losing the K5 body for an E-body Challenger cap means losing M1009 features like the rifle rack and gas can mounts. But you gain style, something real hard to find on a vehicle stout enough to back you up when you tell the crew, "I've been to hell and I'm going back." As part of that rebuild a few miles back, the minimalist interior got all new panels, dash and custom gauges, headliner, seats, and a Sony audio system with Alpine amps, a sub, and Kenwood speakers.