2006 Dodge Viper Srt-10 Convertible 2-door 8.3l on 2040-cars

Auto blog

Dodge performance could be electrified, new hybrid transmissions coming

Dodge is arguably the last company around specializing in old-school muscle cars. Outside of a few models like the Chrysler Pacifica Hybrid and the new e-Torque offerings in the Ram 1500 and Jeep Wrangler, FCA as a whole seems behind the ball when it comes to green or electrified powertrains. That might change over the next few years, as Tim Kuniskis, head of passenger cars at FCA, told Automotive News that he sees the future of performance to be electrified.  At the reveal of the Dodge Charger Hellcat Widebody a few weeks back, Kuniskis said "the absolute future is electrification of these cars." What form this takes or how soon this all might happen is unclear, but changes are likely coming. Kuniskis said the electrified models could be anything from pure battery-electric vehicles to plug-in hybrids to e-axles. FCA’s e-torque system already works with the companyÂ’s Hemi V8 in the Ram 1500, so, if thereÂ’s room in the engine bay, we imagine it would be pretty easy to adapt the mild-hybrid system for other V8-powered vehicles.  One thing to note is that FCA just inked a new deal with ZF. The latter will supply a new 8-speed automatic transmission for longitudinal front-engine cars that will work with both rear and all-wheel drive vehicles. FCA already uses a version of the ZF 8HP automatic, but the big thing to note is that the new transmission has a small electric drive unit built in. If this new transmission is as ubiquitous as the current one, you might find electrified versions of Alfa Romeo and Maserati products as well as those from Dodge, Jeep and Ram. This seems in line with what was announced in last yearÂ’s five-year plan.

Help find Kenny Wayne Shepherd's stolen 1972 Dodge Charger

Judging by his collection of cars, blues musician Kenny Wayne Shepherd (shown above, at left, with fellow musician George Thorogood) is an enthusiast of classic Dodge muscle cars, so it's no surprise that he is an active member of Mopar-related online communities. When his 1972 Dodge Charger turned up missing from an LA-area warehouse last Wednesday, Shepherd took to the forums of Moparts.org in an attempt to get the word out in hopes of recovering his custom classic.
The Charger was stolen along with four other vehicles, and Hot Rod reports that two women have been taken into custody since - but still no word on the car. With its blacked-out appearance (including custom Foose wheels), this car is definitely hard to miss, but Shepherd also said that the car might be even more distinguishable now due to some body damage that may have occurred as it was being driven from the warehouse lot. Shepherd's website has a full gallery of images for this '72 Charger, which also has a modern 392-cubic-inch V8 under the hood and a six-speed gearbox pulled from a Viper.
If you're in the LA area and happen to see this car, Shepherd asks that you call the LAPD West Valley Division at 818-374-7611. Here's to hoping this one-of-a-kind Charger turns up unscathed.

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat