2002 Dodge Viper Gts. Red/white Stripes. Aero Body Kit. 6k Miles. Final Edition. on 2040-cars

Auto blog

Speedkore roaring into SEMA with twin-turbo AWD Charger Hellcat Widebody

Speedkore Performance is nowhere near finished with the Dodge Charger. At last year's SEMA show, the Wisconsin-based tuner showed a 1970 Charger Evolution with carbon and aluminum body panels, and a 996-horsepower Hellcat engine yoked to a six-speed transmission. This year the company teased a profile rendering of a 2020 Charger Hellcat Widebody on Facebook with the line, "All we're going to say is this all-wheel drive, twin-turbo, widebody Charger is going to be unveiled at the Magnaflow booth." Mopar Insiders extracted a tad more information, the first being that we're in for another tuned version of the 6.2-liter Demon Hemi V8 that's swapped its supercharger for twin turbos, and produces more than 1,000 horsepower. Last year, alongside that 1970 Charger, Speedkore unveiled a twin-turbo Hellcat-powered Demon making almost 1,400 horsepower. We don't know yet if this year's Charger will match that output — or exceed it — but we have a benchmark. An all-wheel-drive powertrain divides those horses so the tires have a chance of conquering them. Speedkore's mum on the mechanicals; the firm could have swiped a Grand Cherokee Trackhawk AWD unit and beefed it up, or created its own system.  Some of the steel body panels get carbon fiber replacements, and see those two holes in he front wheel arch? Those are exhaust outlets. MagnaFlow created a custom exhaust with a driver-selectable switch to port gases out the front, say at the track when decibels don't matter, or to send waste through MagnaFlow mufflers and out the rear pipes when silence is required.  The reveal happens at the Magnaflow booth in SEMA's Central Hall on November 5. Those that can't make the show can watch the reveal on MagnaFlowÂ’s Facebook page.

Stellantis aims to eliminate separate inverter, charger to improve EV efficiency

Stellantis has announced that, in collaboration with French battery company Saft and French National Center for Scientific Research, has made significant progress in eliminating two major components of an electric vehicle powertrain: the on-board charger and the power inverter for the motor. The company claims that doing this will allow for better space use in vehicles, as well as improvements in efficiency, cost and reliability of components. As a quick primer, also explained in the below video, the on-board charger and power inverter are sort of translators to get the right current to different parts of the electric powertrain. The on-board charger takes AC power from the grid and converts it to DC to charge the batteries. Then when power goes from the batteries to the electric motor, the power inverter converts that DC power back to AC. These components aren't exactly small. Frequently you'll find them packaged somewhere under the hood. What Stellantis and its cohorts have developed, and have been using on a test vehicle since last summer, are small power inverter boards that can be mounted very closely to the battery packs. They can handle both conversion needs, for charging and discharging, instead of needing two separate devices. The most obvious perk to this is that you can do away with those traditional components and free up more space, either for making smaller vehicles without losing interior volume, or adding space to a vehicle that wouldn't have had it otherwise. There's the additional benefit of reduced weight, something that EVs struggle with. Stellantis also claims improvements in efficiency, reliability, and cost, however, it didn't go into detail as to how this setup would do that exactly. We'll try to get in touch with representatives from Stellantis in order to get more information. We're still a ways out from seeing this technology in production Stellantis vehicles. The company said it aims to apply it to vehicles by the end of the decade. Saft is also looking at using it on stationary battery systems as well. So maybe we'll see it on a 2029 Ram 1500 REV, but for now, we'll be living with traditional chargers and inverters. Related Video: Green Alfa Romeo Chrysler Dodge Fiat RAM Technology Electric

2019 Dodge Challenger R/T Scat Pack 1320 gets race-focused upgrades

The Dodge Challenger SRT Demon is one hell of a machine. It's a single-minded 840-horsepower jackhammer, meant solely to burn rubber and win drag races. It's packed with all sorts of goodies like a transbrake, line lock, and a torque reserve mode. Still, it was an extremely limited-production model. It's also sold out. What do you do if you want some fun on the drag strip and you can't find our don't need the power of a Demon? Buy the new 2019 Dodge Challenger R/T Scat Pack 1320. You can really think of the Scat Pack 1320 as a Demon without the wide bodywork and the supercharged 6.2-liter V8. Instead, you'll find Dodge's tried-and-true 6.4-liter naturally-aspirated V8 under the hood making 485 horsepower and 475 pound-feet of torque. The TorqueFlite 8HP70 eight-speed automatic is the only available transmission. It's required equipment to use the TransBrake and Torque Reserve system. All-four wheels are wrapped in Nexen SUR4G Drag Spec 275/40R20 street-legal drag radial tires. The 1320 names comes from the length of a quarter-mile drag strip — 1,320 feet. The Scat Pack 1320 can run the quarter-mile in 11.7 seconds at 115 mph and hits 60 mph in just 3.8 seconds. Of course, that's in its lightest configuration. Like the Demon, the Scat Pack 1320 only comes with a driver's seat. The passenger and rear seats are each $1 options. The goal was to give grassroots racers a bare-bones performance car at a relatively reasonable price. You don't need passengers if you're only racing. You also shave 114 pounds from the car's curb weight. Other upgrades include an SRT-tuned suspension, a 3.09 rear axle ratio, 41-spline rear half-shafts, 20 x 9.5-inch aluminum-forged wheels with knurled bead seats (to keep the tires from slipping on the rim) and upgraded Brembo brakes with four-piston calipers. The Challenger R/T Scat Pack 1320 joins a number of other upgraded 2019 Dodge models. That includes the Challenger SRT Hellcat Redeye and the upgraded 2019 Charger SRT Hellcat. The Scat Pack 1320 adds $3,995 to the Challenger R/T Scat Pack's base MSRP. That's not the whole story. Since the automatic is mandatory, you need to tack on another $1,595. Add in destination, and the Scat Pack 1320 will set you back at least $45,980. Cars will hit dealer lots early next year. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.