1999 Dodge Viper R/t-10 Convertible 2-door 8.0l on 2040-cars

Auto blog

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.

Dodge Charger SRT Widebody spied filming a commercial

The voice you hear in the video just below appears to be from Instagram user eviil_srt, and as you can tell, he's quite the Mopar superfan. Thing is, the car you see in that video appears worthy of such a fan's adoration. It's clearly a Dodge Charger Widebody, a vehicle that we've been anxiously awaiting ever since it was revealed in prototype form by Mark Trostle, head of design for Dodge and SRT, at Spring Fest 14. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Actually, we've been seeing hints of the wide Charger far longer than that – it was spotted testing on public roads before its officialish debut, and even prior to that, the car's rumored existence had the Internet rumbling with the force of a 700-plus-horsepower supercharged Hemi V8 for months. All that preamble brings us back to the present and the aforementioned Instagram post, in which this upcoming production Widebody was spotted presumably filming for an official television commercial debut. Note the body-color license plate on the Charger Widebody in the video, which indicates it's probably being used for an official purpose by Dodge. It's a short clip, but just long enough that we can clearly make out a big rear wing, vented bumper cover, and deep diffuser punctuated by large dual exhaust tips. We also see some extremely wide tires front and rear, which makes sense considering that there's very likely a whole corral's worth of ponies underhood. The current Dodge Challenger Widebody style is offered on the 485-horsepower R/T Scat Pack trim level, the SRT Hellcat trim level that bumps horsepower all the way to 717, and, for buyers who really hate their rear tires, the 797-hp Hellcat Redeye trim level. Dodge hasn't yet extended the excessively powerful Redeye engine to the Charger line, but the other two levels seem likely. And who knows – the Widebody's introduction might be the perfect opportunity to build a Charger Redeye. In any case, the fact that Dodge is filming commercials indicates that we won't have to wait much longer to find out for sure.

FCA to invest $4.5B for new Detroit plant, expanded production at current facilities

We expected some shifts in manufacturing plans as Fiat Chrysler plans to begin electrifying its Jeep brand, but this news bodes well for Michigan. FCA announced today that it would spend $4.5 billion to expand production in the state, including building a new assembly plant in Detroit and increasing capacity at five other facilities in the state. The plan, which FCA says will create nearly 6,500 new jobs, will help to meet increasing demand for Ram and Jeep products, and to electrify Jeep models. $1.6 billion will be set aside to transform the Mack Avenue Engine Complex into a site to build the next generation of Jeep Grand Cherokee, as well as an unspecified, new three-row Jeep model. FCA says this part of the plan will create 3,850 new jobs. FCA is increasing its investment in the Warren Truck plant to $1.5 billion in order to continue building the Ram 1500 Classic, as well as the new Jeep Wagoneer and Grand Wagoneer, creating 1,400 new jobs. FCA says that the new Ram 1500 Heavy Duty will still be built in Saltillo, Mexico. At FCA's Jefferson North facility, the automaker will invest $900 million to upgrade the plant. This site will continue to build the Dodge Durango, as well help build the next Jeep Grand Cherokee. FCA expects this to create 1,100 new jobs. As Jeep plans to electrify models in its SUV lineup, each of the above plants will produce plug-in hybrid versions of the Jeep models produced there, "with flexibility to build fully battery-electric models in the future," the company said in its announcement. "Three years ago, FCA set a course to grow our profitability based on the strength of the Jeep and Ram brands by realigning our U.S. manufacturing operations," said FCA CEO Mike Manley, referring in part to earlier investments in Illinois, Ohio and Michigan. "Today's announcement represents the next step in that strategy," Manley continued. "It allows Jeep to enter two white space segments that offer significant margin opportunities and will enable new electrified Jeep products, including at least four plug-in hybrid vehicles and the flexibility to produce fully battery-electric vehicles." Other investments include $119 million to move production of the 3.0-, 3.2- and 3.6-liter Pentastar engines from Mack I to the Dundee Engine Plant, and $400 million for increased capacity and 80 new jobs at the Sterling and Warren stamping plants. This comes at a time when FCA's U.S.