1998 Dodge Viper R/t-10 Convertible 2-door 8.0l on 2040-cars

Auto blog

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

The Dodge Challenger 1320 is rarer than the vaunted Demon

Dodge stopped making the 840-horsepower Challenger Demon after the 2018 model year, and it filled the gap the coupe left in its range with a slightly tamer variant called 1320. While it wasn't a limited-edition model, production figures released recently cement its status as a future classic. 1320 references the length of a drag strip, which normally checks in at 1,320 feet, and the name speaks volumes: It was built to go flat-out for a quarter mile. It offered all of the go-fast goodies found in the Demon, including a transbrake, a line lock, an SRT-tuned suspension, plus bigger brakes provided by Brembo, and it swapped the supercharged V8 for a naturally-aspirated, 6.4-liter eight shared with the Challenger 392 and tuned to 485 horsepower. It wasn't quite as quick as the Demon, but it remained a race car barely street-legal enough to put plates on, so it occupied a shallow niche. Dodge made 1,054 examples of the 1320 during the 2019 model year, according to Mopar Insiders. Of those, 1,026 units were sold in the United States, and the remaining 28 stayed in their home country of Canada. As for colors, 232 enthusiasts chose Pitch Black, making it the most popular. At the other end of the spectrum, 13 buyers ordered Maximum Steel, which is the rarest color offered to the public. One 1320 was painted in Yellow Jacket, and another in Billet, but they were pre-production cars. To add context, the firm capped Demon production at 3,300 units, including 300 for the Canadian market. The 1320 is returning for the 2020 model year, so it might ultimately become more common than the Demon, but it remains a rare edition that will turn heads at high-profile classic car auctions in a few decades' time. If you've got one, race it, but pamper it off the track, and hang on to it. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.    

FCA CEO Mike Manley will take undefined new role after PSA merger

MILAN — Fiat Chrysler Chief Executive Mike Manley will remain with the new group set to result from a planned merger with French rival PSA-Peugeot, Chairman John Elkann said on Wednesday. In a letter to Fiat Chrysler (FCA) employees on the day the two companies announced a binding agreement for a $50 billion tie-up to create the world's fourth-largest carmaker, Elkann said he was "delighted" that the combined group would be led by current PSA CEO Carlos Tavares. "And Mike Manley, who has led FCA with huge energy, commitment and success over the past year, will be there alongside him," he said. He did not say what position Manley would hold. Elkann — who will chair the new group — said there was still much to be done to complete the merger. "Over the coming months we must work tirelessly and determinedly to fulfill all the approval requirements needed to finalize the commitment we have signed," he said. Related Video:     Hirings/Firings/Layoffs Chrysler Dodge Fiat Jeep RAM Citroen Peugeot FCA PSA merger Mike Manley carlos tavares