1994 Dodge Viper Base Convertible 2-door on 2040-cars

Auto blog

Chrysler says its 8-speed transmissions will save 700 million gallons

Chrysler Group's TorqueFlite eight-speed transmission could be earning some serious green bragging rights if the company's projections are correct. The recently widely proliferated automatic gearbox, which is now in more than a million vehicles around the world, is poised to save drivers an estimated 700+ million gallons of fuel over the vehicles' lifetimes (an expected cost savings of $2.5 billion). In addition, Chrysler expects a reduction in CO2 emissions by more than six million metric tons. According to Chrysler, and depending on the vehicle, the TorqueFlite can improve fuel economy. The TorqueFlite autobox features particularly close ratios from fifth to eighth gear (see the press release below for the specific numbers), and uses low-viscosity fluid that doesn't need to be replaced. Transmission software adapts to the driving situation to optimize efficiency based on driver behavior, temperature, grade, stability control, and longitudinal and lateral acceleration. The TorqueFlite is capable of handling a variety of duties. As evidenced by the wide range of vehicles Chrysler Group has seen fit to equip with the eight-speed transmission, the TorqueFlite is capable of handling a variety of duties. Since its 2012 introduction, the TorqueFlite has gone from performing cog-swapping duties in Dodge Charger and Chrysler 300 models equipped with the 3.6-liter Pentastar V6 to changing gears in vehicles such as the Pentastar- and Hemi-powered Dodge Durango, Jeep Grand Cherokee and even the Ram 1500 EcoDiesel. For the 2015 model year, the eight-speed is finding its way into even more vehicles with the addition of a third version. In addition to the American-made TorqueFlite 845RE and 8HP70, the new 8HP90 will be manufactured in Saarbrucken, Germany. The 8HP90 is designed for higher torque loads, making it ideal for high-performance vehicles like the 2015 Dodge Challenger SRT Hellcat. The already-in-use 8HP70 will expand its duties to be used in 2015 Hemi models such as the Dodge Charger, Challenger, and Challenger SRT8. You can see the list of those benchmarks in Chrysler's press release below.

Will the Chrysler 300 go front-wheel drive?

FCA chief executive Sergio Marchionne hinted last week that the strapping rear-wheel-drive Chrysler 300 sedan could go front-wheel drive for its next generation using the underpinnings from the Chrysler Pacifica minivan. Speaking at the Pacifica's production launch in Windsor, ON, Marchionne said, "this plant and this architecture is capable of making the 300 successor, the front-wheel, all-wheel-drive successor," Reuters reported. Perhaps realizing he appeared to be announcing a dramatic shift in product strategy, Marchionne backpedaled in response to a follow-up question, noting only that the Ontario factory is "capable" of making the sedan. "It's capable. It's not a commitment," he said, according to Reuters. The 300 is currently built in Brampton, ON, alongside the mechanically similar Dodge Charger and Challenger. The platform, known as LX in enthusiast circles, is an evolution of Mercedes-based chassis pieces that date to the DaimlerChrysler era. Marchionne's comments didn't cover the Dodges and left a lot open to interpretation. The 300 could switch to front- and all-wheel-drive and focus on a more civilized, elegant ride character, leaving the Charger and two-door Challenger as traditional rear-wheel-drive muscle cars. That strategy would further differentiate the Chrysler and Dodge car lines. Additionally, the Charger's RWD platform makes it a popular police vehicle, and both Dodges are offered in top trim as 707-horsepower Hellcats. Switching to front-wheel drive would seemingly complicate both of those endeavors. Rumors have also swirled that Alfa Romeo could contribute RWD underpinnings for Dodge. Related Video: Featured Gallery 2015 Chrysler 300 View 92 Photos Design/Style Chrysler Dodge Off-Road Vehicles Performance Sedan chrysler pacifica

Dodge restores Brass Monkey wheels to Challenger and Charger SRT Hellcat

For the first part of 2020, Dodge removed the option of its Devils Rim aluminum wheel design in Brass Monkey finish for the Hellcat-powered Challenger and Charger models. Mopar Insiders reports the wheels will return to the menu once Dodge starts production of its two muscle cars again, tidings to please forum members asking why they couldn't order the rims. The standard fit on the regular cars is a 20-inch Low Gloss Black Performance wheel, the options either a 20-inch Machined w/Granite Pocket wheel or a 20-inch Matte Vapor SRT aluminum wheel. On the widebody cars, standard fit is a 20-inch Carbon Black Aluminum wheel, one option being a 20-inch Warp Speed Granite wheel that's the same design as the Matte Vapor but with a different finish. The 20-inch Brass Monkeys are the second option on widebody versions of the Charger Hellcat and Hellcat Redeye, replacing the 20-inch Matte Vapor SRT Aluminum rim available on the non-widebody.   Those choices are on the Dodge configurator. At the time of writing, what's missing from the online tool are the Brass Monkey options for the standard Challengers and the Charger Hellcat Widedody models that MI says are coming. The wider versions of the Challenger Hellcat bolt on a set of 20-inchers that are 11 inches wide; we're told the standard cars will offer Brass Monkey rims in 20 x 9.5 inches. The Charger Hellcat only comes in two widebody versions, so it should get the 20x11-inch Brass Monkey wheels, but the options haven't showed up on the configurator. The sole choices at the moment are the Carbon Black Aluminum and Warp Speed Granite wheels. The other difference to note is that wheres the optional wheels on the Challenger all cost $1,095, the Charger's upgrades cost $1,295. Whenever production begins in Brampton, Ontario, again, the coveted wheels will bring another extra with them: Exterior badges done in a Black and Dark Bronze finish. Related Video: