***no Reserve*** 2003 Dodge Viper Srt-10 Convertible With Low Low Miles!!! on 2040-cars

Auto blog

Dodge Challenger Shakedown: '71 body, new guts

While Jeep has created a number of vintage-bodied custom vehicles with modern components, this year's SEMA show plays host to Dodge's take on the idea. The Shakedown concept began life as a 1971 Challenger and ditched almost everything in it, including the engine and chassis. What's left is a modern car with a retro look. The chassis was a particularly complicated part of the job, since the Challenger was originally a unibody car. However, Dodge chose to separate the Challenger's iconic body from its structural parts, and moved it onto a custom, one-off chassis from which the body can be removed as needed. The chassis also carries lowered suspension, Challenger Hellcat brakes, and a 6.4-liter 392 Hemi V8 connected to a six-speed manual transmission from the Viper. Dodge also installed the engine using the new Hemi engine swap kit from Mopar. With the shaker cold-air intake and custom exhaust, the Shakedown's powerplant makes 485 horsepower. View 13 Photos The body itself received plenty of tweaking as well. Dodge shaved off the drip rails, door handles, and turn signals for a cleaner look, and also fitted the grille, headlights, and taillights from a 2017 Challenger. The whole thing is finished in matte black paint with a "vibrating" stripe offset on the left side. The Shakedown also gets 20-inch Slingshot rear wheels and a pair of custom 19-inch versions for the front. On each fender is a bright red "392" decal that uses the same font as the labels on classic Mopars 360 cubic-inch V8s. Inside, the Shakedown gets the same radical upgrade as the chassis. Two Viper seats accompany a Viper steering wheel, and the rear seats are gone altogether. The Viper gearbox is shifted with a Challenger Hellcat gear knob, and carbon-fiber accents and leather adorn the wheel, door panels, instrument panel and center console. Related Video: Image Credit: FCA, Joel Stocksdale SEMA Show Dodge Coupe Concept Cars Performance

All hail the Hellephant, Mopar's 1,000-horsepower crate engine

It's shocking to say this, but the all-powerful Dodge Demon looks weak now that Mopar has unleashed the Hellephant. This crate motor makes 1,000 horsepower and 950 pound-feet of torque, and its name is a combination of the nickname for the old 426-cubic-inch Hemi V8 and, obviously, the Hellcat. This monster is a 426-cubic-inch version of the current third-generation Hemi V8 topped by a supercharger similar to what the Hellcat line packs. Everything is cranked up to — or perhaps, past — 11. The engine block is made of aluminum and weighs 100 pounds less than the equivalent iron block. All of the internals are forged. The stroke and bore have been increased. The supercharger produces 15 pounds of boost and displaces 3 liters; more than the 2.7-liter blower on the Demon and the 2.4-liter blower on the Hellcat. And as big and powerful as it is, it will still rev to 7,000 rpm. It's a thoroughly monstrous motor, but shockingly, it won't be that difficult to live with. For one thing, Mopar will offer a complete kit to get the engine up and running, including an engine computer, wiring harness and drive-by-wire throttle. It also runs on 93-octane pump gas. That's especially amazing considering the Demon engine "only" makes 840 horsepower, and that's on race gas with 100+ octane fuel. It also has us wondering what the Hellephant could make on racing fuel. The Mopar folks did say that there's room to add more power. Pricing wasn't announced for the Hellephant engine. The Hellcat crate engine retails at $19,350 directly from Mopar, so it's safe to assume that the Hellephant will go for more. The installation kit with the computer and harness will be an extra charge of likely over $2,000, based on the Hellcat kit. The engine and the kit will be available in the first quarter of 2019. Related Video: Featured Gallery Hellephant Crate Engine SEMA Show Chrysler Dodge Jeep RAM Performance dodge demon hellephant

Everything is absurd in Fate of the Furious, including the car hacking

Truly ridiculous and absurd scenes and situations are a staple of the Fast and Furious series, And earlier trailers made it clear that Fate of the Furious wouldn't be any different as soon as the submarine appeared. However, it turns out the craziness has spread to the topic of car hacking. The hacker is Charlize Theron's character, Cipher, and she can apparently control any car in the world, and many of them at once. She uses this to great effect in creating giant rivers of rampaging automobiles through city streets, and waterfalls of cars flying off of parking structures. And if you look closely at these groups of vehicles, it is evident that she can even control older cars that have no automated steering or throttle capabilities whatsoever. We would ask how that works, but we know that's a silly question in the Fast and Furious universe. After all, this is the series that featured Dominic Toretto flying through the air over a freeway to catch Letty Ortiz and land on another car. And they survived. Your logic has no power here! We also noticed that Cipher seems to have a preference to hack vehicles from Fiat Chrysler. In the trailer, multiple Chrysler 300s, a Jeep Cherokee, a Jeep Grand Cherokee, and a Dodge Challenger all get some prominent screen time when they're being hacked. We're not so sure this is good product placement for the brand, particularly considering this is the same company that recalled over a million vehicles to fix a software issue that could lead to hacking. Maybe this is the trade-off for having the Dodge Challenger Demon as a hero car. There's more to this trailer than Chryslers and hacking though. It turns out that Cipher has been following Toretto for a few movies now. Also, characters fly with jet packs, and Dwayne "The Rock" Johnson's character shoves a torpedo out of the way, on ice, while hanging out of a truck. Check it all out in the video above. Related Video: