2006 Dodge Stratus Sxt Sedan 4-door 2.4l on 2040-cars

Auto blog

Dodge restores Brass Monkey wheels to Challenger and Charger SRT Hellcat

For the first part of 2020, Dodge removed the option of its Devils Rim aluminum wheel design in Brass Monkey finish for the Hellcat-powered Challenger and Charger models. Mopar Insiders reports the wheels will return to the menu once Dodge starts production of its two muscle cars again, tidings to please forum members asking why they couldn't order the rims. The standard fit on the regular cars is a 20-inch Low Gloss Black Performance wheel, the options either a 20-inch Machined w/Granite Pocket wheel or a 20-inch Matte Vapor SRT aluminum wheel. On the widebody cars, standard fit is a 20-inch Carbon Black Aluminum wheel, one option being a 20-inch Warp Speed Granite wheel that's the same design as the Matte Vapor but with a different finish. The 20-inch Brass Monkeys are the second option on widebody versions of the Charger Hellcat and Hellcat Redeye, replacing the 20-inch Matte Vapor SRT Aluminum rim available on the non-widebody.   Those choices are on the Dodge configurator. At the time of writing, what's missing from the online tool are the Brass Monkey options for the standard Challengers and the Charger Hellcat Widedody models that MI says are coming. The wider versions of the Challenger Hellcat bolt on a set of 20-inchers that are 11 inches wide; we're told the standard cars will offer Brass Monkey rims in 20 x 9.5 inches. The Charger Hellcat only comes in two widebody versions, so it should get the 20x11-inch Brass Monkey wheels, but the options haven't showed up on the configurator. The sole choices at the moment are the Carbon Black Aluminum and Warp Speed Granite wheels. The other difference to note is that wheres the optional wheels on the Challenger all cost $1,095, the Charger's upgrades cost $1,295. Whenever production begins in Brampton, Ontario, again, the coveted wheels will bring another extra with them: Exterior badges done in a Black and Dark Bronze finish. Related Video:    

Watch these Dodge Demons explode on a Texas drag strip

The Dodge Challenger SRT Demon is extremely quick. It can hit 60 mph from a dead stop in less time than it takes to read this sentence thanks to its supercharged 6.2-liter V8. That engine makes up to 840 horsepower and 770 pound-feet of torque, depending on what octane is running through the fuel lines. That's a ton of power going solely to the rear wheels. So much so that Dodge developed a number of features and a new set of tires specifically for the car. In our time with the Demon, the car took abuse run after run on a drag strip without skipping a beat, but it seems some actual owners aren't quite so lucky. Just take a look at what happened to a few of these cars. You can see the whole car shake and jitter right as the whole rear explodes in front of the tree. It seems the initial shock from the launch — the most taxing bit of any drag run — is what kills the differentials. Catastrophic failure is rarely pretty, but it is neat to see the whole thing occur in slow motion. Three more cars — four stock and one modified in total — suffered similar fates. Not a great look for Dodge or SRT. According to The Drive, a private drag event in Texas drew a number of Demon owners all trying to beat NHRA NHRA Top Fuel racer Leah Pritchett's time in her personal Dodge Demon — 42 stock Demons attended along with five modified cars. While no one managed to match her 9.65-second quarter-mile run, a few owners did dip below 10 seconds. Now, there are a few of caveats we must address. First, with any modified car, you run the risk of breaking something, even with a car that's set up from stock specifically for drag strips. Even a set of tires like the Mickey Thompsons shown in the video above can have an effect on driveline components. Horsepower may be king, but it's torque that's the rear killer. All that torque sends a shock through the car. Adding even more with aftermarket parts increases the risk of something failing. The modified car was apparently pushing out about 1,000 horsepower. That said, four of the five vehicles were stock, so any extra power or torque should theoretically be a non-factor. The drag strip's surface was maintained by a company called Mass Traction. FCA used Mass Traction during the Demon's development, so that too should be a non-factor in the part's failure. It's unclear what exactly caused the failures, though The Drive reports that FCA officials are investigating the matter. Related Video: This content is hosted by a third party.

Dodge celebrates centennial with Charger and Challenger 100th Anniversary Editions

In 1914, the Dodge brothers went from being a parts supplier to a full-scale automaker, and to celebrate the centennial of this milestone, Dodge will offer special editions of the 2014 Charger and Challenger early next year. Both cars will be sold in limited numbers (although no specific number was given), and these cars will stand out thanks to unique touches like 20-inch wheels, 100th anniversary edition logos and the exclusive High Octane Red Pearl Coat paint job (shown above).
The 100th Anniversary Edition package, which runs $2,200 on the 2014 Charger and $2,500 on the 2014 Challenger, comes with red or black leather seats with a cloud print (for a denim-like look) and metal badges on the seatbacks that read "Dodge Est. 1914," while similar logos are also found on the wheel center caps and front fenders. The instrument gauges are unique to each car, with the Charger getting black gauges and the Challenger getting white gauges, and to enunciate the 100-year anniversary, both cars have red numerals on the speedometer for the 100-mile-per-hour mark.
Finishing off the 100th Anniversary Edition cars, which will be offered on V6 and R/T models, Dodge adds a flat-bottom steering wheel and embroidered floor mats as a part of the package. Scroll down for the full press release for these commemorative models.