2007 Dodge Sprinter 2500 Base Standard Cargo Van 3-door 3.0l on 2040-cars

Auto blog

Dodge recalls 173 Chargers and Challengers for front wheels that don't fit correctly

Dodge is recalling 173 Challengers and Chargers because they’re equipped with an incompatible front wheel and brake package. All the vehicles are 2019 model year cars built between May 28 and September 25 this year, according to the official NHTSA documents. The wheels donÂ’t provide enough clearance from suspension and brake components, Dodge says. ThereÂ’s a chance that the tireÂ’s inner sidewall will make contact with the steering knuckle. When the tire hits the steering knuckle, it could end up damaging the tire, causing a “sudden loss of tire air pressure.” This, of course, is not what you want out of a tire. Predictably, FCA says this could result in a crash without prior warning. To fix the problem, your local Dodge dealer will be installing the wheels that shouldÂ’ve been equipped on the car in the first place. FCA continues: “Also, for customer satisfaction, replace the rear wheels to match the front wheels.” We were wondering if the rear wheels would come into play here, and it looks like Dodge wonÂ’t be leaving anyone out to dry with mismatched front and rear wheels. The wheels in question are described as “Mid Gloss Black Wheel.” Check your window sticker (or wait for the official mailing) to see if you have those wheels on your Charger or Challenger. Unfortunately, FCA doesnÂ’t detail which trims of Charger and Challenger are affected in its recall notice. The company also makes it clear that this recall is due to “an engineering release error” and not a wheel defect. This particular wheel and brake package shouldÂ’ve never been offered as an option from the factory. Look out for a notice in early December, as FCA says it will begin notifying owners around December 13 this year. As of now, there are no reported injuries or accidents due to the issue.

2020 Dodge Charger pricing starts at $31,390

We've been talking about the 2020 Dodge Charger for three months, and it's finally time to start doing the math on trade-in values and loan payments. The 2020 Charger lineup starts with the SXT in rear-wheel-drive trim priced at $29,895, plus a $1,495 destination charge for a total of $31,390. That's a $425 bump over the 2019 model. The rest of the range doesn't get a price bump higher than $250 save for the Hellcat Widebody. The 2019 Charger didn't offer Widebody variants, so those are new for 2020. The lineup with MSRP changes from 2019: Charger GT RWD $33,390 ($150 more than 2019) Charger SXT AWD $35,090 ($25 more) Charger R/T $37,890 ($150 more) Charger Scat Pack $41,490 ($250 less) Charger Scat Pack Widebody $47,490 (brand new model) Charger SRT Hellcat Widebody $71,140 ($2,150 more than 2019 non-widebody) Daytona 50th Anniversary Edition $75,635 (brand new model) There's a price differential of $44,245 from bottom to top. Even more relevant to the Charger faithful, there's a displacement and power differential from the 3.6-liter Pentastar V6 in the SXT with 292 horsepower and 260 pound-feet of torque to the 6.2-liter supercharged Hemi V8 in the Charger Hellcat Widebody Daytona 50th Anniversary Edition with 717 hp and 650 lb-ft of torque. Dodge plumps the Scat Pack in the middle as having the "most horsepower per dollar," with its 392-cubic-inch Hemi V8 pumping 485 hp and 475 lb-ft. In the amusement park business, this is what's called "Fun for everyone." The Scat Pack Widebody makes a break from its standard sibling with stiffer springs, larger sway bars, and shocks, and retuned dampers. Changes throughout the rest of the lineup save for the SXT center on new wheel and tire options, and an updated Performance Handling Group on the GT and R/T trims. The 2020 Charger order book opens in the fall, but America's family-friendly muscle car won't start hitting dealer lots until early 2020.

Special Dodge Challengers get Hellcat bits to celebrate Mopar's 80th birthday

This year, Mopar is celebrating its 80th anniversary, and it's doing so in two-tone style with this very limited edition Dodge Challenger. Only 160 of these Challengers will be built, with 80 in each paint scheme. Buyers can choose between either Billet Silver or the slightly painful sounding Contusion Blue, each of which gets a hand-painted Pitch Black top half. These Challengers are based on the existing 392 Shaker package, but come with an array of upgrades and tweaks. In addition to the custom two-tone paint, the shaker scoop and rear spoiler are painted in the same color, rather than the usual matte black. The cars come with 20-inch wheels and hand-painted 392 logos on the fenders. The 392 cu. in., or 6.4-liter if you prefer, engine produces the same 485 horsepower and 475 lb-ft of torque as its normal counterpart. This Mopar Challenger will have more access to cold air, though, since it has both the shaker scoop and the headlamp intake from the Challenger Hellcat. At the back, there's also exhaust tips borrowed from the most hellish of Challengers. Or at least the most hellish, so far. View 14 Photos Inside, the changes are more minor. Performance seats are added with embroidered Mopar logos in the backrests. The seats and other trim also feature a silver-colored Tungsten stitching. Naturally, a serial number badge makes an appearance inside, too. Owners will also receive a little box of goodies including a booklet, signed rendering, keychain, additional badge, and a certificate showing the date of manufacture. The overall package is rather attractive, but it isn't cheap. To own one of the few Mopar Challengers, you'll have to fork over $56,885. That's a significant premium over the 392 Scat Pack Shaker, which starts at just $44,890 and makes just as much power. You'll also be able to get a 392 Scat Pack Shaker right away, while the Mopar special edition won't be out until spring. Plus, you may not get it until summer because the hand-painting process takes some time. Of course, for some people, the cost and the wait are worth the exclusivity. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.