2007 Dodge Sprinter 2500 Base Standard Cargo Van 3-door 3.0l on 2040-cars

Auto blog

Stellantis reveals STLA Large platform with EV and ICE support

Hot on the heels of a Jeep Wagoneer S teaser and photos of the prototype next-generation Dodge Charger (or Challenger), comes a reveal and details of what will likely underpin both of them: the STLA Large platform. It's one of multiple Stellantis flexible architectures that will be the basis of its upcoming electric cars, and apparently internal combustion ones, too. Stellantis says the STLA Large platform will be for D- and E-segment cars, crossovers and SUVs. In other words, it will be for midsize and large vehicles. For reference, lengths supported will be from 187.6 to 201.8 inches, and width will range from 74.7 to 79.9 inches. It will be highly flexible, too, with Stellantis claiming significant amounts of adjustability in overhangs, wheelbase, suspension placement and powertrain arrangement. The powertrain flexibility is quite impressive. Front-, rear- and all-wheel-drive layouts will be supported. Single- and dual-motor layouts will be on offer. Internal combustion will be available, too, either on its own or as a hybrid. Apparently engines can be fitted either longitudinally or transversely, too. Battery packs with between 85 and 118 kWh of capacity will be offered, with Stellantis claiming that sedan-style vehicles could have a range of up to 500 miles. The packs will also be available in 400- and 800-volt designs. Stellantis noted also that the platform can "easily accept future energy storage technologies when they reach production readiness." This seems to hint that the company is looking at different battery chemistries and maybe even solid-state batteries that could be added more easily in the future. Furthermore, the platform is designed to handle impressive output. Stellantis says that some models on the platform will have 0-to-62 mph times in the 2-second range. Limited-slip differentials for improved power delivery and wheel-end disconnects for reduced mechanical drag are also on the table for this platform. All of these details fit well with the information previously given for the concept Dodge Charger Daytona Banshee and Jeep Wagoneer S. The former was previewed with both battery voltage architectures and a wide range of electric powertrains with between 456 and 670 horsepower depending on specification and upgrades. And that's just for the 400-volt system; the 800-volt option wasn't detailed. We've also seen photos of the Charger chassis seemingly with provisions for gas engines, likely versions of the Hurricane I6.

Speedkore roaring into SEMA with twin-turbo AWD Charger Hellcat Widebody

Speedkore Performance is nowhere near finished with the Dodge Charger. At last year's SEMA show, the Wisconsin-based tuner showed a 1970 Charger Evolution with carbon and aluminum body panels, and a 996-horsepower Hellcat engine yoked to a six-speed transmission. This year the company teased a profile rendering of a 2020 Charger Hellcat Widebody on Facebook with the line, "All we're going to say is this all-wheel drive, twin-turbo, widebody Charger is going to be unveiled at the Magnaflow booth." Mopar Insiders extracted a tad more information, the first being that we're in for another tuned version of the 6.2-liter Demon Hemi V8 that's swapped its supercharger for twin turbos, and produces more than 1,000 horsepower. Last year, alongside that 1970 Charger, Speedkore unveiled a twin-turbo Hellcat-powered Demon making almost 1,400 horsepower. We don't know yet if this year's Charger will match that output — or exceed it — but we have a benchmark. An all-wheel-drive powertrain divides those horses so the tires have a chance of conquering them. Speedkore's mum on the mechanicals; the firm could have swiped a Grand Cherokee Trackhawk AWD unit and beefed it up, or created its own system.  Some of the steel body panels get carbon fiber replacements, and see those two holes in he front wheel arch? Those are exhaust outlets. MagnaFlow created a custom exhaust with a driver-selectable switch to port gases out the front, say at the track when decibels don't matter, or to send waste through MagnaFlow mufflers and out the rear pipes when silence is required.  The reveal happens at the Magnaflow booth in SEMA's Central Hall on November 5. Those that can't make the show can watch the reveal on MagnaFlowÂ’s Facebook page.

Dodge launches 1 of 1 Viper configurator

Get comfortable because you might be spending a good chunk of time in front of the computer on this. The configurator for the 2015 Dodge Viper GTC 1 of 1 is now online, and it's a ton of fun to play around with. Mechanically, the GTC is just like every current Viper with a 645-horsepower, 8.4-liter V10. But for the special editions Dodge lets buyers tinker with practically everything aesthetic thing. For the exterior alone, the choices include some 8,000 available body colors, two stripe styles in innumerable shades, two hood designs and various brake caliper hues. Plus, there are 16 upholstery colors inside, and options like red seat belts and carbon fiber trim. Dodge reckons there are over 25 million possible combinations, and the models are available to customers on a first-come-first serve basis for each model year. Although, two people wanting identical cars seems pretty unlikely. The configurator is a beauty too. It makes all of these myriad options extremely easy to pick from, and there are even four resolution settings to see your creation in the best possible way. Prices for the GTC start at $94,995 and deliveries are set to start in the second quarter of the year. Although, even if you have no intention of buying one, specifying these custom coupes is still highly entertaining.