2007 Dodge/mercedes/freightliner Sprinter 3500 Dual Wheel Dual Doors on 2040-cars

Auto blog

Junkyard Gem: This 1987 Dodge 600 SE Sedan is suspiciously Benz-ish

The K Platform, introduced for the 1981 model year, saved Chrysler from certain bankruptcy. By 1983, a stretched-out K chassis had been developed; the Chrysler version was the E-Class, while Dodge had the 600. These cars have become all but extinct now, so this '87 600 sedan in a Denver-area wrecking yard is a noteworthy Junkyard Gem. Ford explicitly compared the appearance of the late-1970s Granada to that of the Mercedes-Benz W123 in their advertising, and so the ground was broken for Chrysler to make the allusions to Stuttgart machinery even more obvious a few years later. The name of the Chrysler E-Class was about as subtle as a tire iron blow to the kidneys, and the badging on its Dodge 600 sibling left little to the imagination. 600s came from the factory with several variations of the Chrysler 2.2/2.5 engine, as well as the Mitsubishi "Hemi 2.6" four-cylinder. This car has the 2.5 Chrysler engine, rated at 97 horsepower. Base price was $10,553, about $23,500 in 2017 dollars (the cheapest new Mercedes-Benz E-Class cost $38,600 in 1987, so there wasn't much customer overlap between the two cars). The 600s weren't bad cars for the price, though the build quality wasn't quite up to Mercedes-Benz standards. You'll find this thumbtack treatment on most K-Car headliners that still drive today. The interior is all tan and brown, with plenty of tough industro-velour upholstery and not-so-convincing artificial wood. Aluminum-faced home audio equipment was all the rage during the 1980s, and the trend spread to automotive controls. No cassette in this car, but at least it had AM and FM radio (even plain old mono AM radios were still expensive options on many cars as late as 1987, so the standard AM/FM stereo rig in the 600 was an attractive deal). This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. You can't beat the 600!

Is Mopar readying a special-edition Dart for Chicago?

Chrysler has released the above teaser of a limited-edition Mopar 2013 model that will be unveiled at next month's Chicago Auto Show. Although the automaker doesn't announce what vehicle will get the Mopar treatment, closer investigation of the seats and center console suggest that this car will be a special version of the 2013 Dodge Dart.
This will be the fourth Mopar model in as many years, following on the heels of the Mopar 2010 Challenger, Mopar 2011 Charger and the Mopar '2012 300. There are no details for the Mopar '13 Dart, but we do see that the car will retain the signature black-and-blue color scheme as past Mopar editions. Like these previous models, we expect production of Mopar '13 Dart to be limited to just 500 units.
Scroll down for Chrysler's press release teasing the new Mopar model, and we'll be sure to bring you plenty of live images from the show floor in a couple weeks.

Stellantis aims to eliminate separate inverter, charger to improve EV efficiency

Stellantis has announced that, in collaboration with French battery company Saft and French National Center for Scientific Research, has made significant progress in eliminating two major components of an electric vehicle powertrain: the on-board charger and the power inverter for the motor. The company claims that doing this will allow for better space use in vehicles, as well as improvements in efficiency, cost and reliability of components. As a quick primer, also explained in the below video, the on-board charger and power inverter are sort of translators to get the right current to different parts of the electric powertrain. The on-board charger takes AC power from the grid and converts it to DC to charge the batteries. Then when power goes from the batteries to the electric motor, the power inverter converts that DC power back to AC. These components aren't exactly small. Frequently you'll find them packaged somewhere under the hood. What Stellantis and its cohorts have developed, and have been using on a test vehicle since last summer, are small power inverter boards that can be mounted very closely to the battery packs. They can handle both conversion needs, for charging and discharging, instead of needing two separate devices. The most obvious perk to this is that you can do away with those traditional components and free up more space, either for making smaller vehicles without losing interior volume, or adding space to a vehicle that wouldn't have had it otherwise. There's the additional benefit of reduced weight, something that EVs struggle with. Stellantis also claims improvements in efficiency, reliability, and cost, however, it didn't go into detail as to how this setup would do that exactly. We'll try to get in touch with representatives from Stellantis in order to get more information. We're still a ways out from seeing this technology in production Stellantis vehicles. The company said it aims to apply it to vehicles by the end of the decade. Saft is also looking at using it on stationary battery systems as well. So maybe we'll see it on a 2029 Ram 1500 REV, but for now, we'll be living with traditional chargers and inverters. Related Video: Green Alfa Romeo Chrysler Dodge Fiat RAM Technology Electric