1998 Dodge Conversion Van on 2040-cars

Auto blog

2020 Dodge Charger Hellcat Widebody, Scat Pack Widebody get grip, go faster

You all knew this was coming. Dodge basically showed it to the public a few months ago. But it's finally official, the 2020 Dodge Charger Hellcat Widebody and naturally aspirated Scat Pack Widebody are going into production. Like the Challenger Widebody, the Charger version is defined by its, well, wide body, which is now standard on all Hellcats and an option on Scat Packs. The fender flares add a total of 3.5 inches of width. Dodge also tweaked the front and rear bumpers and added wider side skirts to help the flares blend into the body. The Hellcat gets a unique rear spoiler, whereas the Scat Pack sticks with the same one its scrawnier twin uses. 2020 Dodge Charger Scat Pack Widebody View 20 Photos But the big advantage to this wide body is the fact Dodge can stick way more tire under the Charger. All Charger Widebody models get 11-inch-wide wheels with 305-mm tires at all four corners. Each version gets revised suspension, too. The Hellcat gets stiffer front springs, thicker front and rear anti-roll bars and retuned shocks. The Scat Pack gets a similar update, but without the thicker front anti-roll bars. Both cars also get six-piston front brake calipers from Brembo with two-piece rotors. All these handling upgrades mean the Charger is an even more impressive track machine. Dodge says the Hellcat now pulls 0.96g on a skid pad, and the Scat Pack Widebody does a little better at 0.98g. The Hellcat has also improved its lap time of Chrysler's 2.1-mile test course by 2.1 seconds, and the Scat Pack improved by 1.3 seconds. Both cars are also still fast in a straight line, with Dodge saying the Hellcat will hit 60 mph in 3.6 seconds on the way to a 10.96 quarter-mile time. Which, Dodge proclaims, makes it the world's most powerful and fastest mass-produced sedan. The Scat Pack Widebody will hit 60 in 4.3 seconds on the way to a 12.4-second quarter-mile.

NHTSA investigating 110,000 Ram 2500s and 3500s, one death alleged

The National Highway Traffic Safety Administration has launched an investigation focusing on 110,000 Dodge Ram 2500 and 3500 pickups from model years 2004 to 2006. One death has already been reported, according to NHTSA, due to a potential fault with the clutch interlocks on manual-transmission versions of the heavy duty pickup.
According to the report, these trucks can be started without depressing the clutch. There have been three reports so far, and as we mentioned above, one very sad incident seems to have resulted in the death of a child.
"One complaint involved an incident that occurred when a child was able to enter the vehicle and start the ignition without depressing the clutch. The vehicle then moved forward striking another child resulting in a fatality," NHTSA said in the investigation bulletin, which you can view below.

How to update and secure a vulnerable Chrysler Uconnect system

If you own one of the 1.4 million vehicles affected by the recent Chrysler software recall, you may want to watch this video. In it, we explain how to get the latest infotainment software loaded onto the 8.4-inch Uconnect system. The recall was a response to the findings of researchers who were able to hack into and remotely control a 2014 Jeep Cherokee through its cellular connection. Although Fiat Chrysler has worked with Sprint to plug most of the holes on the carrier side, there are still some vulnerabilities that only this latest software version can patch. Owners have three options to get the update: download it now, wait for a USB stick in the mail, or take the vehicle to an FCA dealer. Chrysler will be sending USB sticks loaded with the software update to customers. Anyone with an internet connection and a USB stick of their own with at least 4 GB capacity can speed things up by downloading the patch from the Uconnect website. We cover that process from start to finish in the video, with the final portion still applicable to those using the FCA-supplied USB stick. If after watching this you still don't want to tackle the patch yourself, you can take your vehicle to the dealer to have it done. Also note that this process is the same for all Uconnect updates, not just the one patching the exploits. Our demonstrator vehicle is a 2015 Ram 1500 pickup. The procedure should be very similar on other products with the 8.4-inch Uconnect system, with only the location of the USB port varying. Once you have the USB stick with the software on it – either after having downloaded it yourself or receiving it in the mail from Chrysler – the installation process is relatively simple. It takes about 15 minutes to perform the update; we edited out the wait in the video. To check whether or not your car's 8.4-inch Uconnect system is running the latest software, go to System Information on the touch screen's Settings page and look at Software Version. The update related to the recall is version 15.17.5. Related Video: Recalls Chrysler Dodge Jeep RAM Safety Technology Infotainment Videos Original Video hacking