2011 Dodge Ram 5500 Custom Must See on 2040-cars

Auto blog

Dodge Demon makes so much torque, it needs stronger driveline parts

Torque is a lovely thing, a sweet and wonderful force that twists and pulls and can help propel a two-ton metal box forward at comical speeds. Torque is also fickle and will bend and break those same metal parts without a second thought, which is why the new Dodge Demon is compensating for its increased torque with some new re-engineered and reinforced parts. And there's software intended to combat wheel hop, which one of the most dramatic ways torque can break stuff. Week 8's video, "Race-hardened Parts," gives a hint towards what all these new parts can do. While we still don't know how much torque the Demon will throw out, we do know it's enough to warrant an upgraded prop shaft, half shafts, and a differential housing. The Challenger Hellcat, which is the basis for the Demon, makes 650 pound-feet of torque already. The new parts will go a long way toward making sure the work from the Demon's engine is properly translated into motion by those Nitto drag radials. The new prop shaft uses high-strength steel, heat-treated stub-shafts, and increases the tube thickness by 20 percent for a 15 percent increase in torque capacity. Additionally, Dodge says the upgraded differential housing allows for a 30 percent increase in torque capacity by using heat-treated A383 aluminum alloy and a higher strength shot-peened gear set. The 41-spline half shafts that deliver 20 percent increased torque capacity through the use of high-strength low alloy steel and 8-ball joints. In addition to the hardware, the Launch Assist software has been tuned to help alleviate wheel hop. Dodge says the Demon is the first factory production car that uses wheel speed sensors to detect hop and momentarily cut torque to compensate. This means a driver can keep their foot planted on the floor while the computer sorts out the traction. Previously, the best solution was to back off the throttle to manually cut the load. Finally, the Dodge Demon will offer a four-point harness mounting bar as an optional accessory. The part will be supplied by Speedlogix and fits in place of the deleted rear seat. Customers can install the bar without having to hack apart their cars to find a proper mounting point. Look for more teasers and info on ifyouknowyouknow.com in the lead-up to the Demon's debut at the 2017 New York Auto Show. Related Video: Image Credit: FCA Dodge Performance dodge demon dodge hellcat

Ringbrothers 1969 Dodge Charger Defector is a mean green machine

The 1969 Dodge Charger is one of the most recognizable cars ever built. Its debut at the peak of the muscle car era, sleek bodywork, and roaring Hemi V8 represented everything that was wonderful about American cars from the 1960s. It was fast, loud and moved like a greyhound off the line in search of that mechanical lure. Ringbrothers, the shop behind cars like the De Tomaso Pantera "ADRNLN" and t he Chevy Chevelle "Recoil," have unveiled its latest project - the 1969 Dodge Charger "Defector". Like most Ringbrothers projects, a first glance doesn't show much more than some wheels, new paint and a different ride height. Like any good custom car, the devil is in the details. The Defector falls into the restomod category, meaning it has classic looks but has been updated with modern parts and technology. This is the first time the shop has done a Mopar product, and they wanted to knock it out with the first attempt. While it may look stock, the bodywork has been significantly altered. Compared to a standard '69 Charger, the trunk lid is two inches shorter and the wheelbase has been increased by three inches. That means the car has new rockers and new quarter panels. The car was then painted in a BASF color called "Greener On The Other Side." It wears a black vinyl roof and a black stripe around the rear. The stripe and grille both sport the Ring Brothers logo. The car rides on 19-inch HRE wheels and uses Baer brakes with six-piston front calipers. The new rear subframe comes from Detroit Speed. The ancient steering rack has been replaced with a new rack and pinion unit. We assume this means it won't steer like a drunken hippo in a mudslide. Like the exterior, changes to the interior are subtle. It looks stock, but the seats wear new upholstery and the dash has been fitted with an Alpine stereo with a touchscreen display. The new steering rack is fitted with a nice Nardi steering wheel. The most modern update rests under the hood. In place of the old V8, Ringbrothers have swapped in a new 6.4-liter Hemi V8. It's the same one you'll find in any number of modern Mopar products. It's been tuned by Wegner Motorsports and exhales through a new Flowmaster exhaust system. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

Next Dodge Challenger to be electrified, says FCA boss

Dodge is the last of Detroit's Big Three to truly keep the muscle car purpose and heritage alive with the Challenger and Charger. As the Mustang and Camaro have transitioned to sports car-like experiences, the high-horsepower Dodges have stuck to their guns as straight-line behemoths with little intention of competing with the others in corner carving. People still dig the old-school-cool of cars like the Challenger, as sales actually went up while Mustang and Camaro sales took a hit in 2018. That said, new FCA boss Mike Manley said things will be changing in an electric way for the next generation, in a report by The Detroit News. "The reality is those platforms and that technology we used does need to move on. They can't exist as you get into the middle-2020s. New technology is going to drive a load of weight out, so we can think of the powertrains in a different way. And we can use electrification to really supplement those vehicles." News of electrified muscle cars is nothing new at this point. Ford says it's going to reveal a Mustang Hybrid in 2020. And with Al Oppenheiser (former chief engineer for the Camaro) moving to GM's electric division, you better believe Chevrolet is working on an electrified version of the Camaro. This, however, is the first solid evidence we have that FCA and Dodge are making such a move. What Manley said next is something we all know to be true, but a bit heartbreaking nonetheless. "I think that electrification will certainly be part of the formula that says what is American muscle in the future. What it isn't going to be is a V8, supercharged, 700-horsepower engine," Manley says. Even if it's a bit silly, we all love the Hellcat for its 707 horsepower V8. Clearly, plenty of other people do, too, because Dodge keeps cranking out more insane versions of the car with the Redeye and Demon. As for how much electrification Dodge's muscle car will receive, Manley wouldn't go into detail. Though he does say that electrification "can't be the dominant part." This should provide some solace to all those worried the gasoline engine could disappear from the American muscle car. Just as Dodge is reluctant to stray from the original intent of the muscle car, it's not hard to imagine the Challenger/Charger being the last to go full-electric. Gas engines supplemented by 48-volt systems or plug-in hybrids will most likely be the end result when we first see electrified Challengers.